Sanyo Vpc E60ex Instruction Manual

							35English
CAPTURING AND PLAYING BACK STILL IMAGES
Viewing still images
The steps for viewing both single shots and sequential shots are the same.
5 Press the playback button [H].
hThe image most recently 
captured appears on the LCD 
monitor.
6 View other images.
hToggle the SET button to the 
left or right to display the 
previous or next image.
To display the previous 
image: Toggle the SET button 
to the left.
To display the next image: 
Toggle the SET button to the 
right.
hTo return to Shooting Screen, 
press the playback button 
[H].

hWhen the playback button [H] 
or ON/OFF button is pressed, 
the camera turns off.
When you are finished viewing images...iPress the ON/OFF button to turn the camera off.
HINT
For still images with voice memo (page 86 and 100)...
iWhen the shutter button is pressed, the voice memo is played back.
Playback button [H]
SET button
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English36
9-image/36-image display playback
1 Press the playback button 
[H].
2 Press [W] ([P]) on the zoom 
switch.
hThe 9-image display 
appears.
hWhen [W] on the zoom 
switch is pressed again, the 
36-image display appears. To 
return to the 9-image display, 
press [T] ([]]) on the zoom 
switch.
3 Select the image to play back.
hToggle the SET button up, 
down, left or right to move 
the orange frame to the 
desired image, and press the 
SET button.
hWhen the 9-image display is 
shown, instead of pressing 
the SET button, you can 
press [T] ([]]) on the zoom 
switch to show the image full 
screen.
100
SET button ON/OFF button
Zoom switch
Audio data Still 
image
Image numberVideo clip Playback button
[H]
Folder 
number
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							37English
CAPTURING AND PLAYING BACK STILL IMAGES
Magnifying (zooming in) the image
1 Display the image that you want to magnify.
2 Press [T] ([]]) on the zoom 
switch.
hMagnification is enabled.
hThe image is magnified, and the 
central portion of image is 
displayed.
hToggle the SET button to view 
different parts of the magnified 
image.
To magnify:
Magnification increases with each 
press of [T] ([]]) on the zoom 
switch.
To return to normal size:
Magnification decreases with each 
press of [W] ([P]) on the zoom 
switch.
hPress the SET button to return to 
the normal (100%) view.
HINT
The magnified portion of the image can be saved as a separate image.
iPress the shutter button. The magnified portion is saved as a new still 
image.
ZOOM
MOVEMOVEMOVE
100%100%100%
ZOOM I/OZOOM I/OZOOM I/OPRESS SHUTTER TO SAVEPRESS SHUTTER TO SAVEPRESS SHUTTER TO SAVE
108%108%108%
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English38
Zoom jump playback
You can magnify a portion of a still image to check the accuracy of the focus.
1 Display a still image to view using 
zoom jump playback.
2 Press the SET button.
hThe image is magnified.
hIf the magnified view appears to 
be in focus, then the overall 
image will be in focus.
3 Toggle the SET button up, down, 
left and right to move to the part 
you wish to magnify, and press [T] 
([]]) on the zoom switch.
hThe displayed area is further 
magnified.
To magnify further: 
Magnification increases with 
each press of [T] ([]]) on the 
zoom switch.
To go back: Magnification 
decreases with each press of 
[W] ([P]) on the zoom switch.
hPress the SET button again to 
return to the normal size (100%) 
screen.
HINT
iZoom jump playback can also be accessed from the Playback Setting 
Screen.
ZOOM
MOVE
ZOOM I/O
PRESS SHUTTER TO SAVE
100%
SET button Zoom switch
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							39English
VIDEO CLIP RECORDING AND PLAYBACK
Recording a video clip
1 Press the ON/OFF button to 
turn the camera on.
2 Press the MENU button.
hThe Mode Select Screen 
appears.
3 Toggle the SET button to the 
right to select “MOVIE”, and 
press the MENU button.
hThe Video Clip Recording 
Screen appears.
4 Press the shutter button.
hVideo clip recording begins. 
During recording, the 
recording time is shown on 
the LCD monitor.
hIt is not necessary to 
continue pressing the shutter 
button while shooting.
5 End the recording.
hPress the shutter button 
again to stop recording and 
save the video clip.
SET button ON/OFF button
MENU button
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English40
Playing back the video clip
6 Press the playback button 
[H].
hThe video clip just recorded 
appears on the LCD monitor.
hVideo clips are indicated by 
a video clip pattern along the 
top and bottom of the 
screen.
7 Press the SET button.
hVideo clip playback begins.
SET button Playback button [H]
Video clip pattern
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							41English
VIDEO CLIP RECORDING AND PLAYBACK
Outline of playback operation
When you are finished viewing video clips...
iPress the ON/OFF button to turn the camera off.
To do this...Do this
Stop playback During playback, toggle the SET button down.
PauseDuring playback, press the SET button or 
toggle the SET button up.
During accelerate playback, toggle the SET 
button up.
To play back 
one image 
at a time 
(single-
frame step)During forward 
playbackAfter pausing playback, toggle the SET button 
to the right.
During reverse 
playbackAfter pausing playback, toggle the SET button 
to the left.
Slow 
playbackDuring forward 
playbackAfter pausing playback, press and hold the 
SET button to the right.
During reverse 
playbackAfter pausing playback, press and hold the 
SET button to the left.
To  
accelerate 
playbackForward 
playbackDuring forward playback, toggle the SET 
button to the right.
* The playback speed changes each time the 
SET button is toggled to the right, as follows:
Normal playback 
→ 2x → 5x → 10x
Toggle the SET button to the left to resume 
normal playback speed.
Reverse 
playbackDuring forward playback, toggle the SET 
button to the left.
* The playback speed changes each time the 
SET button is toggled to the left, as follows:
10x ← 5x
Toggle the SET button to the right to resume 
normal playback speed.
Return to normal playback 
speedPress the SET button.
Adjusting the volumeLouder:During playback, press [T] on the 
zoom switch.
Softer:During playback, press [W] on the 
zoom switch.
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English42
HINT
Adjusting the LCD monitor brightness
iWhile the Shooting Screen is active, you can quickly access the screen for 
adjusting the brightness of the LCD monitor by pressing the MENU button 
for at least 1 second.
Display the video clip playback point
iDuring video clip playback, press the MENU button for at least 1 second to 
display a bar showing the current playback point in the video clip.
iPress the MENU button for about 1 second to cancel the bar.
CAUTION
If no audio is heard...
iThe audio is not played back when the video clip is played back in the 
frame-by-frame playback or reverse playback mode.
During video clip playback, the sound of a motor is audible
iDuring recording, the sound of the optical zoom movement or autofocus 
movement was recorded. This is not a malfunction.
The data for a video clip is very large. 
iTherefore, be aware that if the video clip is uploaded to a computer to be 
played back, the computer may not be able to play back the video fast 
enough, making it appear jerky. (The video will always be displayed 
properly on the LCD monitor or a television.)
When the remaining card memory becomes 10 percent or less of the 
total card capacity...
iThe remaining memory icon appears on the LCD monitor.
iDepending on the card, shooting may end even before the possible 
shooting time indicated.
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							43English
USING THE ZOOM
Your camera has two zoom functions: optical zoom and digital zoom.
You can specify whether or not the digital zoom is enabled, and whether or 
not the optical zoom during video clip recording is enabled (page 127).
1 Point the camera lens at the 
subject.
2 Press [T] or [W] on the zoom 
switch to compose the desired 
image.
[T]: Zoom in on the subject.
[W]: Zoom out.
hWhen the zoom switch is 
pressed, the zoom bar appears 
on the LCD monitor.
hWhen the optical zoom factor is at 
maximum, zooming stops 
temporarily. When [T] on the 
zoom switch is pressed again, the 
mode changes to the digital zoom 
mode and zooming continues.
3 Take the picture.
CAUTION
iIf the optical zoom is used during video clip recording, the noise from the 
movement of the lens may be audible in the recording.
Zoom switch
Zoom bar LCD monitor
Po int e r
When both optical 
and digital zoom are 
enabled
Digital zoom (yellow)Optical zoom
When optical zoom 
only is enabled
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English44
FLASH SETTING
The flash is used not only for taking pictures where there is insufficient light, 
but also when the subject is in shade or in backlight conditions. Your camera’s 
flash has four modes of operation (automatic flash mode, forced flash mode, 
flash off mode, and red-eye reduction mode). Select the flash mode that is 
appropriate for the surrounding conditions. The flash can be enabled only 
when taking single-shot still images.
1 Display the Still Image Shooting 
Screen (page 33).
2 Toggle the SET button up.
hThe flash setting changes.
hThe flash setting appears on the 
LCD monitor.
hThe flash setting can also be 
changed from the Shooting Screen 
(page 58).
No flash indication:
The camera will detect the subject 
brightness and use the flash only 
when required. In a backlight 
situation, if only the center of the 
image is very dark, the flash will 
operate to compensate (auto 
flash).
m: The flash will operate with every 
image captured regardless of the 
conditions. Use this setting under 
backlight conditions, when the 
subject is in shade, under 
fluorescent lighting conditions, etc. 
(forced flash).
l: The flash will not operate even in dark situations. Use this setting 
when capturing an image in a location where flash photography is 
prohibited, or when shooting a night landscape scene (flash off).
J: The digital camera will detect the subject brightness and use the 
flash only when required. At this time the flash will operate in a 
manner that reduces the red reflection (“red-eye”) in the subject’s 
eyes (red-eye reduction).
SET button
Flash mode icon
Downloaded From camera-usermanual.com Sanyo Manuals