Sanyo Vpc E60ex Instruction Manual

							95English
PLAYBACK VOLUME
Adjust the playback volume for video clips and audio data.
1 Display PAGE 1 of the Playback Setting Screen (page 87).
2 Select the playback volume icon 
Z, and press the SET button.
hThe volume control bar appears.
3 Toggle the SET button left or right to 
adjust the volume, and press the 
SET button.
hThe playback volume is set, and 
you are returned to the Playback 
Setting Screen.
PLAY VOLUME
VOLUME SETTING
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English96
DISPLAYING THE CALENDAR
Photos that were captured as calendar shots can be viewed in a calendar-
format schedule.
Previously captured images can also be entered in the calendar, and images 
can be removed from the calendar as desired (page 97).
1 Make a calendar shot (page 77).
2 Display a still image (page 35), and 
toggle the SET button down.
hThe calendar appears.
hYou can press the MENU button to 
return to the Playback Screen.
3 Toggle the SET button up, down, left 
and right to select the desired date, 
and press the SET button.
hThe image that was entered for the 
selected date is displayed full-
screen.
hToggle the SET button to the left or 
right to display the previous or next 
image that was entered in the 
calendar.
hToggle the SET button down to 
display the calendar.
hWhen the MENU button is pressed, 
the Save To Calender Screen 
(page 97) appears.
CAUTION
If the calendar does not appear...
iThe calendar will not appear in step 1 if no image has been entered in the 
schedule. Follow the procedure to make a calendar shot (page 77), or 
enter an image in the calendar (page 97), and then display the calendar.
302316
2
3124
103
2518
4
2619125
27 20
136
28 2114
7
29 22
15 1
3 MAR. 2006                                                                                   06.12.25SUN MON TUE WED THU FRI SAT
98
11
17
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							97English
ENTER AN IMAGE IN THE CALENDAR
You can enter a previously captured still image in the calendar, as well as 
remove images from the calendar.
Display the Save To Calender Screen
1 Display the image you wish to enter 
in the calendar, and access PAGE 1 
of the Playback Setting Screen 
(page 87).
2 Select the save to calendar icon 
H, and press the SET button.
hThe Save To Calendar Screen 
appears.
SPECIFY DATE:
Specify the date and enter the 
image in the calendar.
DELETE FROM CALENDAR: 
Remove an image from the 
calendar (if one has already 
been entered).
EXIT:Return to the Playback Setting 
Screen.
SAVE TO CALENDAR
SPECIFY DATE
EXIT
DELETE FROM CALENDAR
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English98
Entering an image in the calendar
1 Display the image you wish to enter, and display the Save To 
Calendar Screen (page 97).
2 Select “SPECIFY DATE”, and 
press the SET button.
hThe screen to specify the date 
appears.
3 Specify the date in which you wish 
to enter the image.

1Select “SAVE TO CALENDAR”.
2Press the SET button.

1Select “DATE”, and press the 
SET button.
hThe screen to set the date 
appears.
2Toggle the SET button up or 
down to set the year.
hToggle the SET button to the 
right, and set the month and 
day in the same manner.
3Press the SET button.
4Select “SAVE TO CALENDAR”, 
and press the SET button.
hThe image is entered in the 
calendar.
4 Select “EXIT” and press the SET 
button.
hThe image is entered in the 
calendar.
DATE:2006/10/11(WED)
SAVE TO CALENDAR
EXIT2006/10/11
DATE
SAVE TO CALENDAR
DATE2006/10/11 DATE:2006/10/11(WED)
SAVE TO CALENDAR
Entry date
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							99English
ENTER AN IMAGE IN THE CALENDAR
Removing an image from the calendar
1 Display the calendar image you wish to remove, and display the 
Save To Calendar Screen (page 97).
2 Select “DELETE FROM 
CALENDAR”, and press the SET 
button.
hThe Confirm Delete screen 
appears.
3 Select “YES”, and press the SET 
button.
4 Select “EXIT” and press the SET 
button.
hThe image is removed from the 
calendar.
DATE:2006/10/11(WED)
DELETE?
YES
EXIT
SAVE TO CALENDAR
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English100
ADDING/DELETING A VOICE MEMO
You can add a voice memo to a still image previously recorded.
You can also erase the voice memo only from an image.
1 Display the still image to which you want to add a voice memo.
hIf the image already has a voice memo recorded, the voice memo icon 
e appears.
2 Display PAGE 1 of the Playback Setting Screen (page 87).
3 Select the add audio icon 4, and 
press the SET button.
hThe Add Audio Screen appears.
RECORD:
Record a new voice memo.
If a voice memo has already 
been recorded for the image, 
“RE-RECORD” is shown 
instead.
ERASE AUDIO:
Erase the voice memo from the 
image (if one is recorded).
EXIT:Return to the Playback Setting Screen.ADD AUDIO
RECORD
EXIT
ERASE AUDIO
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							101English
ADDING/DELETING A VOICE MEMO
4 Select the desired option, and press 
the SET button.

hVoice memo recording starts when 
the shutter button is pressed and 
released. Talk into the microphone 
on the digital camera.
hA voice memo of up to about 
10 seconds can be recorded.
hTo end the recording before 
10 seconds has elapsed, press the 
shutter button.
hWhile the voice memo is being 
recorded, the RECORDING screen 
is displayed.

hThe Confirm Erase Screen 
appears.
hSelect “YES”, and press the SET 
button.
HINT
iFor still images, you can also add a voice memo immediately after 
capturing an image (page 86).
iNote that if you erase the image, the accompanying voice memo will also 
be erased.
iIf a voice memo is added to an image that already has a voice memo, the 
new recording will replace the previous one.
RECORDING
PRESS SHUTTER TO STOP
Recording time indication
PRESS SHUTTER TO REC
BACK TO MENU
ADD AUDIO
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English102
PRINT SETTINGS
In addition to using your printer to print out still images captured with your 
camera, as with conventional film, you can have prints made at shops offering 
digital print services. Moreover, this camera is DPOF-compatible, so you can 
use the camera to specify the number of prints, whether or not the date is 
displayed on the print, and also to specify an index print.
Display the Print Settings Screen
1 Display PAGE 1 of the Playback Setting Screen (page 87).
2 Select the print settings icon b, 
and press the SET button.
hThe Print Setting Screen appears.
ALL IMAGES:
The specified print settings apply to 
all the still images on the card.
EACH IMAGE:
The print settings are specified for 
each individual image.
INDEX:
All the still images are printed as 
miniature images (thumbnail 
images), several images on one 
print.
ALL CLEAR:
Clear all the print settings. This 
cannot be selected if no print 
settings have been made for the 
image.
EXIT:
Return to the Still Image Playback 
Setting Screen.PRINT SETTINGALL IMAGES
EACH IMAGE
INDEX
ALL CLEAR
EXIT
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							103English
PRINT SETTINGS
HINT
Printing a single frame from a video clip
iTo print with a printer or have the digital print service shop print out a still 
image from a video clip, you must first save it (save frame (page 113)) as a 
still image.
About the DPOF format
iDPOF (Digital Print Order Format) is a print order format. You can connect 
your camera to a DPOF-compatible printer to produce your prints. You can 
also set the print settings (page 151) for the desired images, and then have 
the reserved images printed automatically.
About the finished prints
iImages that have been rotated will be printed in their original orientation.
iThe quality of the print output will differ depending on the print service and 
printer used.
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English104
Specifying date imprinting and number of prints
You can specify print settings for each individual image (EACH IMAGE), or 
apply the print settings to all the images on the card (ALL IMAGES).
1 Display the Print Setting Screen (page 102).
2 Select ALL IMAGES or EACH IMAGE.
ALL IMAGES:
The set print settings are applied to 
all the still images on the card.
EACH IMAGE:
The set print settings are applied 
only to the image currently 
displayed.
3 Press the SET button.
hThe Date/Copies Print Screen 
appears.
hIf “EACH IMAGE” was selected, 
toggle the SET button to the left or 
right to display the desired image to 
print.
hUnder “SETTINGS” the settings 
that are currently active for the 
displayed image are shown. You 
can toggle the SET button to the left 
or right to confirm the print settings 
for each image.
PRINT SETTINGALL IMAGES
EACH IMAGE
INDEX
ALL CLEAR
EXIT
EACH IMAGE
DATE
COPIES
NO
1DATE:
COPIES:
SETTINGS
ADD TO PRINT SETTING
EXIT
Downloaded From camera-usermanual.com Sanyo Manuals