Home > Sanyo > Camera > Sanyo Vcc4594 P Manual

Sanyo Vcc4594 P Manual

Here you can view all the pages of manual Sanyo Vcc4594 P Manual. The Sanyo manuals for Camera are available online for free. You can easily download all the documents as PDF.

Page 1

INSTRUCTION MANUAL
BEDIENUNGSANLEITUNG
MANUEL DINSTRUCTIONS
VCC-4594P
VCC-4592P
COLOUR CCD camera
CCD-Farbkamera
Cam‚ra CCD COULEUR
CCD
About this manualÃ
Before installing  and using the camera, please read this manual
carefully. Be sure to keep it handy for later reference.
Ã
This manual gives basic connections and operating instructions for 2
PAL models (VCC-4594P, 4592P).
šber diese BedienungsanleitungÃ
Lesen Sie bitte vor der Montage und dem Inbetriebnehmen der
Kamera zuerst diese...

Page 2

Depending on the conditions of use, installation and environment,
please be sure to make the appropriate settings and adjustments. If
you need help with installation and/or settings, please consult your
dealer.CONTENTSPRECAUTIONS ........................................................................................ 2
PARTS NAMES........................................................................................ 3
CONCERNING AUTO-IRIS LENSES ............................................................

Page 3

PRECAUTIONS
In case of problem
Do not use the camera if smoke or a strange odour comes from the
unit, or if it seems not to function correctly. Disconnect the power
cord immediately, and consult your dealer (or a Sanyo Authorized
Service Centre).Do not open or modify
Do not open the cabinet, as it may be dangerous and cause damage
to the unit. For internal settings and repairs, consult your dealer (or a
Sanyo Authorized Service Centre).Do not put objects inside the unit
Make sure that no metal objects or...

Page 4

PARTS NAMES
1
Power indicator (POWER)
Comes on when the power to the camera is on.
2
Video output connector (VIDEO OUT: BNC type)
Connect this connector to a device such as a VCR or monitor with a VIDEO IN connector.
3
Manual colour/black and white setting terminal (CONTROL)ÃG (ground) terminalÃC (colour) terminalÃB (black and white) terminal
4
External sync composite video signal input connector (VBS IN: BNC type)
Connect to this connector the synchronizing signal output from a synchronizing signal...

Page 5

PARTS NAMES
8
Flange-back lock screw
9
Lens mount cap
The cap is installed to protect the lens mount section.
Remove the lens mount cap before installing a lens (sold separately).
F
Flange-back adjustment lever (See page 6)
G
Camera installation bracket
The bracket can be fixed at the top or bottom of the camera. When fixing the bracket, be sure to use the
longer screws and install the shorter screws on the opposite side to seal the openings.1
Shorter screws: M3 x 4
2
Longer screws: M3 x 6
3
Camera...

Page 6

CONCERNING AUTO-IRIS LENSES
DC type auto-iris lens
A lens without amplifier circuit that operates only on a DC power source. In general, this type of lens is
referred to as DC type coil lens or DC type non-amplifier lens.
(Set the A.I. LENS switch to the DC position.)VIDEO type auto-iris lens
A lens with amplifier circuit that operates on video signal and DC power source. In general, this type of lens is
referred to as EE amplifier type lens.
ALC and LEVEL volume level controls are available on the lens...

Page 7

FLANGE-BACK ADJUSTMENT
If the pick-up surface is not correctly positioned with relation to the lens focal point, the picture will be out of
focus (in particular when using auto-iris power zoom lenses, sold separately). If that is the case, adjust the
flange-back position as described below.1
Using a + screwdriver, loosen the flange-back lock screw (M2:+).
2
Set the zoom lens to the maximum telephoto position, set the focus using the focus ring on the lens.
3
Set the zoom lens to the maximum wide angle...

Page 8

MOUNTING THE LENS
Please use a DC type auto-iris lens (sold separately).
Checking the lens mountDo not use a lens if length ©Lª is more than 5 mm. If not, that may damage the camera and prevent
proper installation.
1
Remove the lens mount cap from the camera.
2
Install the auto-iris lens.
CS mount type lens
Carefully align the lens mount with the camera opening, then turn the lens slowly to install it.
C mount type lens
To allow for flange-back adjustment, install the C-mount adaptor (option) on the lens...

Page 9

MOUNTING THE LENS
Rewiring the lens cable in the lens iris plug
1Prepare the lens cable.
Cut the cable at the plug, then remove approx. 8 mm of the cable sheath and strip about 2 mm from each wire.
2
Install the lens iris plug.
Solder the cable to the pins following the correct pin layout (refer to the table and illustrations), then close
the plug cover.
Pin layout
DC type lenses VIDEO type lenses
1
Brake coil (Ä) +12 V DC (50 mA max.)
2
Brake coil (+) Not used
3
Drive coil (+) Video output (1.0 Vp-p,...

Page 10

CONNECTIONS(VCC-4594P only)
Basic connection for monitoring or recording
The peripheral devices (VCR, monitor, lens, etc.) and cables are
sold separately.1
Make the video signal connection between the camera and
the monitor or time lapse VCR.
2
Connect to 24 V AC UL listed class 2 power supply (sold
separately).CAUTION:ÃTo prevent camera and/or power supply failure, pay close attention
to polarity when making the connections.ÃTo prevent fire hazard any UL listed wire rated VW-1, should be used
for the 24...
Start reading Sanyo Vcc4594 P Manual
All Sanyo manuals