Sanyo Pid 42ae1 Instruction Manual

11

MENU OPERATION
Picture menu
■ Advanced settings
Use the 5 or 6 button to select Advanced settings and press the 1 or 2 button to enter the sub menu as follows  .
DCDi (Directional Correlational Deinterlacing) is used to process moving angled edge in deinterlacing to get the smoothest and most 
natural image . Press the 1 or 2 button on the remote control to select On or Off .
ACC/ACM (ACC: Adaptive Contrast and Color; ACM-II: Active Color Management-II) is used to select adaptive Brightness,...

12

MENU OPERATION
Language is used to select the preferred language  . Use the 1 or 2 button to select English, French, German, Italian, Spanish or Dutch .
H-Position changes the OSD position horizontally by using the 1 or 2 button .
V-Position changes the OSD position vertically by using the 1 or 2 button .
Duration is used to set the display time of the MENU by using the 1 or 2 button . (5 ~ 120 seconds)
Transparence  is used to adjust transparence of menu display  . Use the 1 or 2 button to adjust...

13

INSTALLATION MODE
Installation Mode
Installation Mode
On programTuner MenuMax VolumeWinter modeRC inhibitionChild LockAddressBaud ratePanel protectionAV Auto shut offNetwork StandbyOn Timer FunctionLED light settingDCRNetwork initialTemperature ErrorIP AddressSubnetGatewayDNS
OffOff63OffOffOff019200OffOffOnOffOffOff>>>0000000000000000000000000000000000000000000000000
G2.02 0000
SelectAdjustMENUExit
This LCD monitor allows you to set up the following:
SETTING PROCEDURE
1.  Press and hold the GREEN...

14

OPERATION
Selection of picture size
Select screen size from FULL, FULL ALL, ZOOM 16:9, TITLE IN 16:9, ZOOM 14:9, TITLE IN 14:9, NORMAL or NATUR AL WIDE by pressing 
the WIDE button repeatedly on the Remote Control .
✐  When in AV2 (RGBHV) or PC mode FULL or NORMAL can be 
selected  .
Note: Full - Set display area 100%
✐  Only in DVI or AV2 (YPbPr) displaying high resolution content 
FULL and FULL ALL are selectable  .
Note:  FULL - Set display area 95% FULL ALL - Set display area 100%
All other...

1

OPERATION
PIP/POP Operation
Using this function, you can enjoy a DVI or Network program and an image (AV1, AV2, AV3 or PC input) at the same time  .Press the ON/OFF button on the Remote Control repeatly to select PIP1, PIP2, POP or OFF mode  . 
During the PIP/POP mode, press the Main/Sub Picture Swap but-ton will switch the location for main and sub picture  .
✐  Only the sound on the main picture is heard from the monitor speaker. The sound on the sub-picture cannot be heard.
✐   The details...

16

OPERATION (IN TEXT MODE)
Teletext Operation
Teletext is only available via external sources .Teletext mode can be operated by the following buttons on the Re-
mote Control . 
✐   Some buttons have dual functions  .
TXT/TV
Press TXT/TV button to select teletext  . Press again will display: 
AV mode: AV/TEXT mode/MIX mode/AV  .
Note:MIX mode:  AV (broadcast image) screen and the contents of TEXT 
(superimposed) are displayed simultaneously  . 
CANCEL mode:  TEXT/MIX MODE is cancelled temporarily and...

17

SPECIFICATIONS/HELPFUL HINTS
Specification
Common specification
Power source: 100 ~ 240V 50Hz/60Hz
Colour system: PAL/NTSC/NTSC4  .43/SECAM
AV terminal AV1: Scart CENELEC Standard
     Input:   Composite video, RGB (5V RGB with 5V sync to pin 14) and audio-L/R
     Output: composite video from AV3 and audio L/R
 AV2: BNC
     Input: RGB, H and V/ Y, Pb, Pr and audio L/R
     Output: RGB, H and V/ Y, Pb, Pr
 AV3: BNC
     Input: Composite video
     Output: Composite video
Audio Monitor Out: CINCH...

18

DIMENSIONS
1002.8
971.5
1010.3940932.3
603.3533525.3
1005523.5397.2330
400
400
545
125.6
51.6
VIEWING AREA(H)
VIEWING AREA(V)
Controlbuttons
(WALL MOUNT SCREW)4 x M6, 1.0 PITCH x 12MM
RC RECEIVERLED INDICATOR
Unit: mm
1002.8
971.5
1010.3
940
932.3
603.3533525.3
1005523.5397.2330
400
400
545
125.6
51.6
VIEWING AREA(H)
VIEWING AREA(V)
Controlbuttons
(WALL MOUNT SCREW)4 x M6, 1.0 PITCH x 12MM
RC RECEIVERLED INDICATOR
GBGB
 

19

PC/DVI-D/COMPONENT SIGNAL SUPPORT TIMING LIST
■ DVI-D signal support timing
■ Component signal support timing
ResolutionHorizontal Frequency (kHz)
Ver tical Frequency (Hz)Remark
720 x 48015 .73560iSDT V 480i
720 x 576 15 .62550iSDT V 576i
720 x 480 31 .2560pSDT V 480p
720 x 576 31 .2550pSDT V 576p
1280 x 720 45 .0060pHDT V 720p
1280 x 720 37 .5050pHDT V 720p
1920 x 1080 33 .7560iHDT V 1080i
1920 x 1080 28 .1350iHDT V 1080i
ResolutionHorizontal Frequency (kHz)
Ver tical Frequency (Hz)Remark
640 x 480...

20

RS232C COMMAND TABLES
■ Functional Execution Command Table
CommandItem
C00POWER ON
C01POWER OFF
C24Wide “Natural” direct
C25Wide “Zoom 16:9” direct
C26Wide “Title in 16:9” direct
C27Wide “Zoom 14:9” direct
C28Wide “Title in 14:9” direct
C29Wide “Full” direct
C0FWide “Normal” direct
C70AV1 direct
C71RGB direct
C72AV2 RGBHV direct
C73AV2 YPbPr direct
C74AV3 direct
C75DVI direct
C76PC direct
C64PC Auto adjust
C92Factory settings
CF PSAVE ONPower save ON
CF PSAVE OFFPower save OFF
CF CLOK ONChild lock...