Sanyo Pid 42ae1 Instruction Manual

							
INSTRUCTION MANUALPID- 42AE1
PID- 42AS1
LCD Monitor
Please read this Instruction book before using your LCD monitor. We wish you many hours of pleasure from your new LCD monitor.
 
						

							
2

TABLE OF CONTENTS . . . . . . . . . . . . . . . . . . . . . . . .2
SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . .3
Installation and Use  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .3
SERVICING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Servicing   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .4
Federal Communications Commission Notice   .  .  .  .  .  .  .  .  .5
AC Power Cord Requirement  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .6
End-User License  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .6
Installation Notice  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .7
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Step: 1 Mains Connection   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .8
Step: 2 Connections   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .8
Remote control  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .9
Remote control battery installation   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .9
Controls and Menus  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .10
Menu Operation  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .10
Picture menu  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .10
MENU OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Picture menu  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .11
Sound menu  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .11
Time menu  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .11
Setup menu  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .11
PC Adj  . menu  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
12
INSTALLATION MODE . . . . . . . . . . . . . . . . . . . . . . .13
Installation Mode  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .13
OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Selection of picture size  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .14
PIP/POP Operation  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .15
OPERATION (IN TEXT MODE) . . . . . . . . . . . . . . . . .16
Teletext Operation  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .16
SPECIFICATIONS/HELPFUL HINTS . . . . . . . . . . . . . .17
Specification  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .17
Helpful hints  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .17
DIMENSIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
PC/DVI-D/COMPONENT SIGNAL SUPPORT TIMING 
LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
RS232C COMMAND TABLES . . . . . . . . . . . . . . . . . .20
TABLE OF CONTENTS
Standard monitor (PID- 42AE1)
● EXTENSIVE INPUT & OUTPUT TERMINALS (for all products)
     This monitor set has various input and output terminals including component (Y,Pb,Pr) or RGBHV input and output with 5 -BNC, composite 
video input and output with BNC, and RS-232 control port (serial D-Sub 9) input and output which offer the daisy chain connection  . There 
are computer inputs (a D-Sub 15 RGB terminal) and DVI-D input with HDCP for High definition signals. There are also jacks for external speakers.
Daylight readable monitor (PID- 42AS1)
In addition to Standard monitor, it has adaptive brightness in accordance with prevailing light conditions .
Trademarks
Each name of corporations or products in this book is either a registered trademark or a trademark of its respective 
corporation .
GBGB
 
						

							
3

CAUTION: Please read and retain for your safety. This unit has been designed and manufactured to assure your personal safety, but improper use can result in potential electric shock or fire hazards. In order not to defeat the safeguards incorporated in this monitor observe the 
following basic rules for its installation, use and servicing .
Installation and Use
Do not allow anything to rest on the power 
cord  . Do not locate this LCD monitor where the cord will be damaged by people walking on it.
Do not overload wall outlets and extension cords as this can result in fire or electric shock.A suitable socket outlet must be provided near 
to the monitor and shall be easily accessible  .
Do not place this LCD monitor near any heat sources such as radiators, heaters, stoves and other heat-generating products (including amplifiers). Do not place your LCD monitor on an unstable stand, shelf or table  . Serious injury to an individual, and damage to the LCD monitor may 
result if it should fall . Your sales person can recommend an approved 
wall mounting kit. A special wall mounting kit is available for this 
model .
This LCD monitor should be operated only from the type of power source indicated on the monitor or as indicated in the Operating In-
structions  . If you are not sure of the type of power supply, consult your 
sales person or your local power company  .
For added protection it is strongly recommended that this LCD monitor has its mains supplied via an approved earth fault protection 
device .
WARNING: To prevent injury the LCD monitor must be securely attached to the wall in accordance with the manufacturers installation 
instructions  .
IMPORTANT:This product must be ear thed.This unit is not disconnected from the mains unless the mains lead is unplugged. The installer must make sure that the mains plug is easily 
accessible .
Do not use immediately after moving the LCD monitor from a low temperature to a high temperature environment, as this causes con-densation, which may result in fire, electric shock, or other hazards. Before cleaning, unplug the monitor from the wall socket. 
Do not mount near an open flame source. Open flames must never 
be used near this LCD monitor  .
This LCD monitor should not be built in or enclosed in any way, heat 
build up will reduce the life of the monitor  .
This LCD monitor should have a minimum distance of 5cm away from the wall and the monitor should have 10cm distance around the top 
and sides .
Always mount using recommended and substantial fixtures and fit-
tings  .
10cm
10cm10cm5cm
Do not  cover the ventilation slot on the LCD monitor  . Heat build-up can reduce the service life of your LCD monitor, and can also be 
dangerous .
Do not apply liquid cleaners or aerosol cleaners directly onto the LCD 
monitor  . Use a damp cloth for cleaning  .
ADDITIONAL FOR NORTH AMERICA AND CANADA:This monitor must NOT be permanently mounted to the building 
structure  . It must be mounted in such a way that it can be removed 
using basic tools  .
The power supply cord must NOT be attached to the building sur face  . The power supply cord must NOT be routed through walls, ceiling, floors, or other similar openings in the building structure. The power supply cord MUST be positioned so as to prevent physical 
damage  .
Important: (UK only)
THIS PRODUCT MUST BE EARTHED.This equipment is fitted with an approved mains lead and an 
approved non rewireable UK mains plug  . To change a fuse in this 
type of plug proceed as follows:
1. Remove the fuse cover and fuse  .
2.  Fit a new fuse which should be a BS1362 13 Amp A  .S  .T  .A  . or 
BSI approved type  .
3. Ensure that the fuse cover is correctly refitted.
If the fuse cover is lost or damaged the plug must NOT be used 
but replaced with a serviceable plug  .
If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a rating of 13 Amp, ensure the fuse cover is correctly fitted. If a plug without a fuse is used, the 
fuse at the distribution board should not be greater than 13 Amp  .
Note: The severed plug must be destroyed to avoid a possible shock hazard should it be inserted into a 13 Amp socket else-
where  .
The wires in this mains lead are coloured in accordance with the following code:
  Blue  Neutral
  Brown  Live
  Green and Yellow  Ear th
1.  The Blue wire must be connected to the terminal which is marked with the letter “N” or coloured BLACK.
2.   The Brown wire must be connected to the terminal with the letter “L” or coloured RED.
3.   The Green and Yellow wire must be connected to the terminal which is marked with the letter “E” or coloured GREEN or 
GREEN and YELLOW  .
Before replacing the plug cover, make certain that the cord grip is 
clamped over the sheath of the lead - not simply over the wires  .
Do not attempt to bypass the safety purpose of the grounding 
type plug  .
THIS UNIT IS NOT DISCONNECTED FROM THE MAINS UN-LESS THE MAINS LEAD IS UNPLUGGED.
THE INSTALLER MUST MAKE SURE THE MAINS LEAD IS EASILY ACCESSIBLE.
SAFETY PRECAUTIONSGBGB
 
						

							
4

Servicing
Your monitor is fully transistorised and does not contain any user ser viceable components. 
You must not remove the rear cover of the monitor by yourself. The apparatus is working with high voltages and could damage objects or even endanger people. Leave all required repair and ser vice jobs to an authorised ser vice technician. He will exclusively use such spare par ts that are complying with the same safety standards as applicable to the original par ts. The use of original spare par ts can prevent fire, shock and other hazards.
Unplug the LCD monitor from the wall outlet and refer servicing to qualified service personnel under the following  
conditions:
n If the power cord or plug is damaged  .
n If liquid has been spilt in to the LCD monitor  .
n If the LCD monitor has been dropped or the cabinet has been damaged  .
n If the LCD monitor exhibits a distinct change in per formance  .
n If the LCD monitor does not operate normally by following the operating instructions  .
n If the LCD monitor has been exposed to rain or water  .
Adjust only those controls that are covered in the operating instructions as improper adjustment of other controls may result in damage  . 
 This will often require extensive work by a qualified technician to restore the monitor to normal operation.
Important recycling information.
Your SANYO product is designed and manufactured with high quality materials and components 
which can be recycled and reused .
This symbol means that electrical and electronic equipment, at their end-of-life, should be dis-
posed of separately  .
In the European Union there are separate collection systems for used electrical and electronic 
products .
Please help us to conserve the environment we live in! 
Note:  This symbol mark and recycle system are applied only to EU countries are not applied to 
other countries of the world  .
SERVICINGGBGB
 
						

							


Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC 
Rules . These limits are designed to provide reasonable protection against harmful interference when the equipment is operated 
in a commercial environment . This equipment generates, uses, and can radiate radio frequency energy and, if not installed 
and used in accordance with the instruction manual, may cause harmful interference to radio communications . Operation of 
this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the 
interference at his own expense  .
Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or 
modifications should be made, you could be required to stop operation of the equipment.
Canadian Radio Interference Regulations
This Class A digital apparatus meets all requirements of the Canadian ICES-003  .
WARNING
This is a Class A product . In a domestic environment this product may cause radio interference in which case the user may be 
required to take adequate measures.
SERVICINGGBGB
 
						

							
6

AC Power Cord Requirement
The AC Power Cord supplied with this LCD monitor meets the requirement for use in the country in which you  
purchase it  . 
AC Power Cord for the United States and Canada:
AC Power Cord used in the United States and Canada is listed by the Under writers Laboratories (UL) and certified  
by the Canadian Standard Association (CSA)  .
AC Power Cord has a grounding-type AC line plug. This is a safety feature to make sure that the plug will fit into the power outlet.  
Do not try to defeat this safety feature  . Should you be unable to insert the plug into the outlet, contact your electrician  .
THE SOCKET- OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE
End-User License
The product (meaning the equipment or appliance to which this documentation relates) incorporates Software (the software applications, utili-
ties and modules embedded within the Product) which is owned by Sanyo or its licensors  . Before using the product, please read the End-User 
License Conditions detailed below  . If you do not agree to the terms and conditions of the End-User License, Please do not proceed to use the 
Product- repack the Product unused and return it to your supplier together with proof of purchase for a full refund. By using the product, you 
agree to be bound by the terms and conditions of the End-User License  .
License Grant, Conditions and restrictions
1.  Sanyo grants you a non-exclusive, world-wide (subject to export controls), non-transferable (except as permitted by 2 below), royalty-free 
license to use the Software upon and with the Product  .
2.  You may not transfer any of your license rights in the Software without the prior written consent of SANYO and if consent is provided then the Software shall only be transferred in conjunction with the transfer of the Product AND provided that the transferee has read and agreed 
to accept the terms and conditions of this license  .
3.  You must ensure that the copyright, trademark and other protective notices contained in the Software are maintained and not altered or 
removed  .
4.  The Software provided hereunder is copyrighted and licensed (not sold)  . SANYO especially does not transfer title or and ownership rights 
in the Software to you  . The Software provided hereunder may contain or be derived from portions of materials provided to SANYO under 
license by a third party supplier  .
 .
 Except as expressly permitted by statute you may not;
●  use the Software in conjunction with any other computer hardware other than the product;
●  copy all or part of the Software;
●  incorporate all (or any of) the Software into other programs developed by (or on behalf of) you and/or used by you;
●  reverse-engineer, decompile or disassemble the Software;
●  make the Software (or any part of it) available, or permit its redistribution, for use with any computer hardware other than the Product; or  
rent, lease, gift, loan, sell, distribute or transfer possession of the whole or any part of the Software  .
Termination
This license is effective until terminated . This license will terminate automatically without notice if you fail to comply with any of its provisions  .
Disclaimer
1.  The Software is(to the extent permitted by law) supplied “as is” and SANYO and its suppliers expressly exclude all warranties, express or implied, including (but not limited to) warranties of satisfactory quality, fitness for purpose and non-infringement (save to the extent that the 
same are not capable of exclusion at law)  .
2.  In no circumstances will SANYO be liable for any direct, indirect, consequential, or incidental damage (including loss of profits, business interruption, loss of data or the cost of procurement of substitute goods, technology or services) arising out of the use or the inability to use 
the Software (save to the extent that such liability is not capable of exclusion at law)  .
General
1.  This End-User License will be governed by laws of England and the User may only bring claims in the English Courts and SANYO shall be 
entitled to bring a claim in the courts of any jurisdiction  .
2.  This End-User License is governed by the laws of the State of California  . The End-User and Sanyo agree that any action to enforce or inter-
pret the terms of this End-User License shall be brought only in the appropriate state or federal court located in Los Angeles County, Califor-
nia  . The End-User and Sanyo hereby submit to the exclusive jurisdiction and venue of such court  .
3.  The above terms and conditions supersede any prior agreement, oral or written, between you and SANYO relating to the Software  .
SERVICING
GROUND
GBGB
 
						

							
7

Installation Notice
1.  The LCD monitor can be installated by the following two ways:
2.   The product should be mounted to wall only as recommended by the manufacturer  .
3.  The installation of the bracket must be done by a qualified professional.
  ● Installing the bracket by unqualified personnel may result in injury.
  ● Always use the mounting device specified by a qualified professional.
Note:
For use only with UL Listed Wall Mount Bracket.
SERVICING
Screw holes for installing
Screw holes for installingScrews:Spec       : M6 X 12MM (metric)Material  : Stainless Steel
Or
Note:Don't install the TV set reversed as shown below :
NG
GBGB
 
						

							
8

Step: 1 Mains Connection
■  Connect the display unit to VGA, BNC and Scart con-
nector as required.
1.   Connect the in-line power connector to the Mains Inlet as shown 
above  .
2.  Connect the power cord of the LCD monitor to a suitable wall outlet  . 
✐  As this product does not have a mains On/Off switch, please 
ensure your mains plug is easily accessible  .
✐  The LCD monitor is prepared for a mains voltage AC100 ~ 240V, 
50Hz/60Hz  . To completely switch off the mains, or when the 
display unit is not to be used for an extended period of time, it is 
advisable to disconnect the power cord from the power outlet  . 
✐  Please use the correct mains lead supplied with the set for your 
area  .
3.   Warning:
 To prevent injury, the unit must be securely attached to 
the wall in accordance with the installation instructions  .
WARNING! High voltages are used in the operation of this set. Refer service to qualified 
service personnel .
Step: 2 Connections
■ INPUT selectionTo switch either AV1, RGB, AV2, AV3, PC, DVI or Network by press-ing the INPUT button on your remote control repeatedly  .
1. AV1
SCART connection/CVBS/RGB/S-VIDEO  .
2. RGB
TTL input (5V RGB signals) into SCART terminal .
3. Y, Pb, Pr/RGBHV connection (AV2)Choose Y, Pb, Pr or RGB H/ V connection by selecting AV2 Setting 
in Set up menu (see page 12)  . You can connect your DVD player 
to the Y, Pb, Pr terminals instead of using a scart lead  . This can 
support high definition in analogue component form. RGB H/ V can 
be used as a PC input via the BNC terminals . Both options support 
a large range of resolutions (page 19)  . AV2-OUT can be used to 
output the incoming AV2 signal to the other monitor  .
4. AV3
Composite (CVBS) signal input  .
AV3-OUT can be used to output the incoming AV3 signal to the 
other monitor .
 . DVI-D (Digital Video Inter face)
DVI-D supports a large range of resolutions as shown on page 19  .
6. PC connection
PC input (PC-IN D-SUB)  . This input supports a large range of reso
-
lutions as shown page 19  . Audio can be connected via the 3  .5mm 
PC-AUDIO IN  .
7. External Speaker
Output the audio signal from AV1, AV2, AV3, PC and DVI  .  The speaker impedance is 8 ohms.
8. AV2 / DVI AUDIO INConnect the audio output (stereo) from a computer or video equip-
ment connected AV2 or DVI  .
9. Monitor Audio OUTThis terminals output fixed level from AUDIO IN.
10. RS232C IN/OUT
   When the monitor is controlled by a computer, connect to this jack 
with serial control cable  .
 
You can connect to another monitor with RS232C OUT  . When you connect PC with RS232C, select “ON” at Network 
standby in Installation mode .  If it is selected “OFF”, RS232C terminals do not functional. Also select push button to “SERIAL POART”.
INSTALLATION
 Mains Inlet
AC Mains Outlet
GBGB
 
						

							
9

InputTo switch input source from AV1, RGB, AV2, AV3, PC, DVI or Network mode .
StandbyTo switch the monitor on and off  . Also see page 10 .
MenuTo enter and exit the main menu, and sub menu  .
WideTo select the screen mode Full, Full All, Zoom 16:9, Title in 16:9, Zoom 14:9, Title in 14:9,  Normal or Natural wide .
Refer to page 14  .
RecallTo display input selection information and the Time 
set .
You can also select colour systems in AV1/AV3 mode as follows: AUTO í PAL í SECAM í NTSC í NTSC4.43 í PAL M í PAL N .
Auto PCIt can also be automatically adjusted in PC mode 
by pressing this button for twice  .
BackUsed to return to the previous menu  .
Up and DownTo select the next or previous item .
Bass ExpanderTo get an emphasised bass sound ON or OFF  .
TXT/TVTo select Teletext mode .
Main/Sub Picture SwapTo swap Main and Sub picture  .
ON/OFFTo switch OFF í PIP(1) í PIP(2) í POP mode 
in turn  .
Refer to page 15  .
Level Up/DownTo adjust the sound volume level or enter sub 
menus .
F/OKTo confirm the initial setting in the menu.
Picture mode selectorPress the 9 button repeatedly to select the fol-
lowing picture mode  .
Personal - Personal preference mode  .Standard - Normal viewing mode  .Dynamic - Suitable for brightly lit rooms  .Soft - Low contrast settingEco -  Suitable for dimly lit rooms and gives a cin-ema-like effect.
FreezeTo switch picture still on or off  .
GreenPress this button for more than 5 seconds, installa-
tion mode will appear  .
Remote control
Remote control battery installation
Install two “A A” 1.5 volt batteries so that the “+” and “–” marks on the batteries match the “+” and “–” marks inside the unit into the remote 
control handset .
FOR EU USERS
The symbol mark and recycling systems described below apply to EU 
countries and do not apply to countries in other areas of the world  . 
Your SANYO product is designed and manufactured with high quality 
materials and components which can be recycled and/or reused .
The symbol mark means that electrical and electronic equipment, batteries and accumulators, at their end-of-life, should be disposed of 
separately from your household waste .
Note:If a chemical symbol is printed beneath the symbol mark, this chemi-cal symbol means that the battery or accumulator contains a heavy 
metal at a certain concentration . This will be indicated as follows: Hg: 
mercury, Cd: cadmium, Pb: lead
In the European Union there are separate collection systems for used 
electrical and electronic equipment, batteries and accumulators  . 
Please, dispose of them correctly at your local community waste col-
lection/recycling centre  .
Please, help us to conserve the environment we live in!
INSTALLATION
Sound MuteTo mute the sound from the speakers.The sound changes as follows: Normal volumeMute.
GBGB
 
						

							
10

INSTALLATION
Controls and Menus
å
ç
å The LCD display has a Standby light to show there is power.
Switching into/from standby mode
The Standby mode is used for switching the LCD monitor off for short 
periods of time . In standby mode the monitor is switched off but is still 
receiving mains power  .
●   To turn the monitor into standby mode, press the 4 button .  
The blue power indicator illuminates more brightly  .
●  
To turn the monitor ON from standby mode, press the 4 button 
again  .
If you find the power indicator flashing, disconnect power cord from the power outlet and contact our Service desk.
This warning is a sign to let you know that the power protection function of this TV set is now 
operating  .
ç Control buttons (back cover)
Menu button:  Used to display or cancel main menu  .
Input/d button:  Switch between AV1, RGB, AV2, AV3, PC , DVI or Network mode. It is also used to provide sub 
menu selection from the Main Menu  .
1 or 2 buttons: provide up and down adjustments  .
4 button:  To switch to standby mode (to switch off completely 
disconnect the monitor from the power supply)  .
Menu Operation
Many of your monitors functions are controlled through the menu 
function, using the remote control .
MENUPictureBrightnessContrastColorTint (only if NTSC equipment is detected)SharpnessWhite ToneWhite Tone / R / G / BAdvanced SettingDCDi / ACC/ACM / CCS / DNR / MPEG NR / Film ModeSoundTrebleBassBalanceBass ExpanderOn / OffTime
Setup
PC Adj.
Current TimeScheduleWeekday
On ProgramAV1 /  RGB / AV2 / AV3 / PC / DVI / Network 
Menu SetupPIP / POP SetupInitial SettingsText LanguageTile ModeAV2 Setting
Western / Eastern / Russian / Arabic / FarsiTile Mode Active / H/V_Sets / H/V Location / Bezel H/V AdjustmentRGBHV / YPbPr
Auto AdjustH-PositionV-PositionClockPhase
Language / H/V-Position / Duration / TransparencePIP/POP Mode / Main/Sub Source / PIP Position
TimeAction
Active
Power On / Power OffOn / Off
1 - 20
Current Weekday
XGA ModePC Power saveXGA / WXGA 1366x768On / Off
During menu operation the bottom of the on screen display will show 
which controls can be used for menu navigation  . 
Press the MENU button to enter the main menu  . Whenever main 
menu is accessed initially, PICTURE will be the default selection  .
A sub menu is selected using the 5 or 6 button and pressing the 1 or 2 button when the required sub menu is highlighted  . When you have finished you can press the BACK button to return to the previous menu, press the MENU button to exit the menu operation  .
Picture menu
1.  Press the MENU button . PICTURE  will be the default selection  . Press the 1 or 2 button to enter  . Set the picture settings for your “personal” preference.
2.  Use the 5 or 6 button  to select eg  . Brightness and the 1 or 2 button to adjust levels  .
■ White ToneMay be used to adjust the color tone of the picture  . Use the 5 or 6 button to select White Tone and press the 1 or 2 button 
to enter the sub menu  . You can select Personal, Cool, Standard or Warm settings by using the 1 or 2 button . To adjust the color tone of the picture by using the 5 or 6 button to select Red(R), Green(G) or Blue(B) and the 1 or 2 button  to adjust levels  . 
These settings will be stored in personal mode automatically  .
Power Indicator
Infrared Remote Receiver
GBGB