Sanyo Lcd 37ca9s Owners Manual
Have a look at the manual Sanyo Lcd 37ca9s Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 550 Sanyo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
31
PICTURE
Press MENU button and the main menu will appear. Press
POINT {y buttons to select PICTURE, and will display
PICTURE menu.
Press POINT xz buttons to select the item desired.
Press POINT {y buttons to adjust value.
Select PERSONAL, STANDARD, DYNAMIC or SOFT by
pressing POINT {y buttons.
”PERSONAL: User presets picture adjustment in PICTURE
MODE.
”STANDARD: Natural and splendid picture level preset on LCD TV.
”DYNAMIC: Bright and dynamic picture. It is suitable for nice
playback, such as DVD program.
”SOFT: Inhibit strong contrast and colour, it is beneficial for eye
protection.
PICTURE MODE
BRIGHTNESS
Press POINT { button to adjust image darken, and POINTy
button to adjust image brighten. (0~100)
COLOUR TONEThis function is used for selecting colour temperature. Select
NORMAL, WARM, COOL or PERSONAL with POINT {y
buttons.Press POINT {button to decrease contrast, and POINTybutton
to increase contrast. (0~100)
CONTRAST
SCREEN MENU
MENU OPERATION (PC/HDMI mode)
Note: The screen menu in HDMI mode will be displayed
differently under different condition.
1. When the set cannot be received HDMI signal in HDMI mode,
the screen menu will be displayed as right picture.
2. But when the set can be received HDMI signal in HDMI mode,
the screen menu is different, and the details please refer to
page 26.
Press POINT { button to lighten red tone, and POINTy button to
deepen red tone. (0~100)COLOUR-R
Press POINT { button to lighten green tone, and POINTybutton
to deepen green tone. (0~100)
COLOUR-G
Press POINT { button to lighten blue tone, and POINTybutton to
deepen blue tone. (0~100)COLOUR-B
1
2
3
vPress BACK button to return to the previous menu.
vPress MENU button or wait for 5~60 seconds (refer to
DURATION on page 29) to exit menu operation.
LCD-CA9S-A NEW.indd 312/06/2008 2:08:35 PM
32
SOUND
Press MENU button and the main menu will appear. Press
POINT {y buttons to select SOUND, and will display
SOUND menu.
Press POINTxz buttons to select the item desired.
Press POINT {y buttons to adjust value.
SCREEN MENU
Note: For the details, please refer to SOUND on page 27.
MENU OPERATION (PC/HDMI mode)
TIMER
SELECTADJUSTBACKEXIT
- - : - -ON TIMER
SELADJ BACK
EXIT
ON TIMER CH 29OFF
BACKMENU
OFF TIMER
SCREEN MENU Press MENU button and the main menu will appear. Press
POINT {y buttons to select TIMER, and will display
TIMER menu.
Press POINT xz buttons to select the item desired.
Press POINT {y buttons to adjust value.
Note: For the details, please refer to TIMER on page 28.
H-POSITION
V-POSITION
DURATION
SEL
ADJBACKEXIT
LANGUAGE
15 SEC
BACK
MENU
TRANSPARENCE
TTX LANGUAGEWESTERN
OSD
Press MENU button and the main menu will appear. Press
POINT {y buttons to select OSD, and will display OSD
menu.
Press POINT xz buttons to select the item desired.
Press POINT {y buttons to adjust value.
SCREEN MENU
Note: For the details, please refer to OSD on page 29.vPress BACK button to return to the previous menu.
vPress MENU button or wait for 5~60 seconds (refer to
DURATION on page 29) to exit menu operation.
vPress BACK button to return to the previous menu.
vPress MENU button or wait for 5~60 seconds (refer to
DURATION on page 29) to exit menu operation.
vPress BACK button to return to the previous menu.
vPress MENU button or wait for 5~60 seconds (refer to
DURATION on page 29) to exit menu operation.
1
2
3
1
2
3
1
2
3
SELADJBACKEXITBACK
MENU
SOUND MODE
BASS
TREBLE
BALANCE50
5050
LCD-CA9S-A NEW.indd 322/06/2008 2:08:36 PM
33
MENU OPERATION (PC/HDMI mode)
SCREEN MENU Press MENU button and the main menu will appear. Press
POINT {y buttons to select SYSTEM, and will display
SYSTEM menu.
Press POINT xz buttons to select the item desired.
Press POINT {y buttons to adjust value.
ECO
This function can automatically adjust panels brightness by ambient
brightness.
Press POINT {y buttons to set ON or OFF.
CHILD LOCK
SYSTEM
This function is used to adjust the position of image displayed on
screen. It can be selected when the LCD TV could be received PC
signal and in PC mode. (Refer to SIGNAL MODE COLUMN on
page 38.)
Press POINT {y buttons to enter PC SCREEN menu. It can
be select AUTO, H-POSITION, V-POSITION, CLOCK or
PHASE to adjust.
Press POINT {y buttons, and the TV automatically detects
incoming signal, and adjust itself to optimize its performance. If the
image is not displayed properly, a manual adjustment is required
(Refer to following adjustments).
The horizontal picture position will be moved to the left side by
pressing POINT { button. And it will be moved to the right side by
pressing POINTybutton. (0~100)
The vertical picture position will be moved down side by pressing
POINT { button. And it will be moved up side by pressing POINT
y button. (0~100)
Eliminate flicker from the image. Press POINT {y buttons to
adjust CLOCK. (0~100)
Eliminate disorder from the image. Press POINT {y buttons to
adjust PHASE. (0~100) AUTO ADJUST
H-POSITION
V-POSITION
CLOCK
PHASE
PC ADJUST
When CHILD LOCK is set ON, the Side Control buttons will be
locked except for POWER ON/OFF button .
1
2
3
vPress BACK button to return to the previous menu.
vPress MENU button or wait for 5~60 seconds (refer to
DURATION on page 29) to exit menu operation.`RYNQWONPXReVaONPX
ZR[b
ECO
CHILD LOCK
PC ADJUST
$
`RYNQWONPXReVaONPX
ZR[b
ECO
CHILD LOCK
PC ADJUSTOFF
$
`RYNQWONPXReVaONPX
ZR[b
ECO
CHILD LOCK
PC ADJUSTOFF
H-POSITION
V-POSITION
CLOCK
PHASE
SELADJBACKEXITBACKMENU
AUTO ADJUSTSTART
LCD-CA9S-A NEW.indd 332/06/2008 2:08:40 PM
34
MENU OPERATION
The Dealer Mode has 7 different modes: VOLUME LOCK, TUNING LOCK, STA R T MODE, OSD, RC,
RESET and AC POWER MODE.
SIDE CONTROLS
REMOTE CONTROLSVOLUME LOCK
This function is used to limit the maximal volume.
STA R T MODE
The LCD TV will automatically enter to the setting mode while being
turned on. You can select OFF, TV, AV1-S, AV2-DVD, PC,
HDMI 1 or HDMI2 in STA R T MODE. When it is set OFF, it willkeep the mode before being turning off.
OSD
When it is set OFF, Corresponding OSD cannot display on thescreen while operating.
RESET
This function returns all setting values to the factory defaultsettings.
DISPLAYbutton
PressPOINTxz{/ybuttons
Press POINT{y buttons to select a maximal volume.
VOLUME LOCK will be the default selection. (When you adjustothers, press POINTxzbuttons to select the item desired.)
Press POINT{y buttons to select ON. (The maximalyp)volume is the set value by step 1.)
DEALER MODE MENU
TO DISPLAY DEALER MODE:Press and hold Menu button on Side Controls, and then pressDISPLAY button on remote controls to display Dealer mode menu.YTake the way of setting VOLUME LOCK for example:
Press and hold Menu button on Side Controls, and pressDISPLAY button on remote controls to display Dealer modemenu.
Press menu button to exit menu operation.
DEALER MODE
RC
When it is set OFF, the Remote Control will be locked and cannotbe used.
VOLUME LOCK
OFF START MODE
OSD
RC
RESET
DEALER MODE
ON
OFF
ON
SELADJEXITMENU
OFF TUNING LOCK
AC POWER MODE
ON
TUNING LOCK
The way to prevent user from executing the Tuning function.
AC POWER MODE
You can set STANDBY, ON or LAST in AC POWER MODE.When LCD TV is connected to an outlet with AC power cord, it willenter the status as setting.
1
2
3
4
5
MENU button
LCD-CA9S-A NEW.indd 34LC44
35
Be sure to disconnect the AC Power cord from AC outlet before cleaning the LCD TV.
Clean your LCD TV as follows:
”Gently wipe the screen and cabinet with dry soft cloth.
”The screen is likely to be damaged if it is not maintained properly. Do not use hard objects like a hard
cloth or paper. Do not use solvents or abrasions.
CAUTION :
Do not use benzene, thinner, or any volatile substances to clean the LCD TV. These chemicals may
damage the cabinet finish.
AUTO POWER OFF
When a trouble is detected in the LCD TV, the protection function works and turn the LCD TV OFF
automatically. When the LCD TV is turned OFF with this function, the POWER indicator becomes red and
LCD TVs power cannot be turned ON.
Disconnect Power cord and contact sales dealer where you purchased the LCD TV or the service center.
To turn on LCD TV again for checking:
1) Disconnect Power cord from AC outlet and plug it on again.
2) Refer to TURNING ON/OFF LCD TV on Page 15 to attempt to turn on LCD TV.
If LCD TV is not turned on, disconnect Power cord and contact to service center.
For protecting product safety, protection feature provided inside LCD TV. Refer to the following please.
CLEANING LCD TV
FUNCTION OF PRODUCT SAFETY FEATURE
APPENDIX
LCD-CA9S-A NEW.indd 352/06/2008 2:08:43 PM
36 APPENDIX TROUBLESHOOTING Before calling your dealer or service center for assistance, check the matters below once again. 1. Make sure you have connected LCD TV to your equipment as described in the section CONNECTING LCD TV. 2. Check cable connection. Verify that all external equipment and power cords are properly connected. 3. Verify that all power is switched on. 4. If LCD TV still does not produce an image, re-start the external equipment. 5. If the image still does not appear, unplug LCD TV from the external equipment and check the external equipment. The problem may be with your graphics controller rather than with LCD TV. (When you reconnect LCD TV, remember to turn the external equipment and TV off before you power up LCD TV. Power the equipment back on in order of : LCD TV and external equipment.) 6. If the problem still exists, check the following chart. Remote Control does not work ”Check the batteries. ”Make sure nothing is between the Remote Receiver and the Remote Control. ”Make sure you are not too far from LCD TV when using Remote Control. Maximum operating range is 16.4 (5m). ” Is direct sunlight or strong artificial light shining on LCD TVs Infrared Remote Receiver? Eliminate the light by closing curtains, pointing the light in a different direction, etc. No image ”Check the connection between the external equipment and LCD TV. ”When turning LCD TV on, it takes a few seconds to display the image. ”Check the system that you select is corresponding with the external equipment or the video equipment. ”Make sure the temperature is not out of the Operating Temperature (0°C ~ 40°C). ”Turn off power, then turn on again, re-start LCD TV. No sound
37
Model LCD-32CA9S / LCD-37CA9S / LCD-42CA9S
Maximum Visible Range LCD-32CA9S: 81cm (Screen Diagonal Size);
LCD-37CA9S: 94cm (Screen Diagonal Size);
LCD-42CA9S: 106cm (Screen Diagonal Size);
Picture Resolution 1366(H) x 768(V)
Viewable Angle(L
{/3) L/R:+/- 89D, U/D:+/- 89D
Brightness 500cd/m²
Contrast 1500:1
HILQLWLRQ 5)$QDORJ6LJQDOV +RUL]RQWDO
38 512341096781514131112 CONFIGURATIONS OF VGA TERMINALS VGA IN (D-SUB) TERMINAL Terminal : D-SUB15 PIN Connect video output terminal of LCD TV to this terminal with VGA Cable (not supplied). When connecting Macintosh computer, the MAC Adapter (not supplied) is required. Pin Configuration SIGNAL MODE COLUMN (recommended) APPENDIX Red Input Ground (Horiz.sync.) Green Input Sense 2Blue Input Ground (Red)Ground (Green)Ground (Blue) 1 5 2 43 678 No Connect Horiz. sync. Ground (Vert.sync.) Sense 1Sense 0 Vert. sync.Reserved 9 13 10 1211 1415 This LCD TV can correspond to the signals below. After connecting with the computer, LCD TV can auto- matically recognize the signal from the connected PC( computer)/ HDMI. PC SIGNAL MODE COLUMN (recommended) Note: ”In case LCD TV can not display properly due to the connecting cable or the graphic hardware, please make adjustments about phase, clock and so on. ”In principle, LCD TV can not display the signal mode which not described in the above column. But sometimes it can display a signal very similar with one of the signal described. ”If you want to change the definition and colour of PC, please select one from the column. ”It is not the trouble of LCD TV if interference appears on the picture while switching the signal mode. ”It is different from CRT Monitor that it is no blink of the picture when the V-Freq. of the signal is 60Hz. It is recommended to select 60Hz V-Freq. of your computer to display better pictures. ”The Dot Clock of the computers signal must be less than 100 MHz. ”Specifications are subject to change without notice. In case of the following things, some messages will display on the screen. ”When the input signal from PC is out of the display range, Out of range will display. ON 1DIPON OFF 23456 MAC ADAPTER (NOT SUPPLIED) Set slide switches as shown in the table below depending on RESOLUTION MODE that you want to use before you turn on LCD TV and computer. Slide Switches (1-6) ONON ON ON OFF OFF ON OFF ON OFF OFF OFF OFF OFF OFF OFF 123456 19 Mode (1024x768) 16 Mode (832x624) 13 Mode (640x480) OFF OFF LCD-CA9S-A NEW.indd 382/06/2008 2:08:45 PM
39
APPENDIX
When input signal is digital from DVD terminal, refer to the chart below\
.
When input signal is digital from HDMI terminal, refer to the chart belo\
w.
Parts NameToxic Element
Plastic
Display Screen
Circuit Board
Hardware
Remote Control
Other Parts
( eg. :paster,line etc)
O:The symbol means the content of toxic materials in all of homogeneous m\
aterials must meet requirement
of SJ/T11363-2006 standard.
X:The symbol means the content of toxic materials in all of homogeneous m\
aterials beyonds
SJ/T11363-2006 standard.
Copper Alloy
TABLE OF TOXIC ELEMENT FOR PRODUCTION
Frame
FrequencyResolution
NO.
Audio Freq. Format : 16bit/20bit/24bit
HDMI™ (V.1.3 with Deep Color)
LCD-CA9S-A NEW.indd 392/06/2008 2:08:47 PM
40
”Through in uninstalling work, handling with more than two people is recommended.
”When holding (moving or lifting) the LCD Display, hold the displays body. Do not handle the LCD TV by
holding the attached accessory parts (speakers), otherwise it may result in damage.
”Before uninstalling, provide a desk (or a part of it) which is strong enough to support the weight of the
LCD TV and this stand. The desk must be larger than the LCD Display screen size. The desks surface
must be flat and maintained with soft material (such as a blanket) for protecting the screen surface.
”Before putting the LCD Display on the desk, make sure there is no object on it. Leaving any object
under the screen may cause damage on the screen.
”The LCD TV with this stand should be uninstalled on flat and level place. Do not place on such as
an non flat, unlevel or unstable cart or stand. The display may fall, causing not only serious damage to
the products but serious injury to a person.
Uninstalling Stand Base
APPENDIX
CAUTION IN UNINSTALLING STAND BASE
SAFETY NOTE
For correct installing, mounting and uninstalling LCD TV Stand, it is strongly recommended to use a trained,
authorized dealer. Failure to follow correct procedures could result in damage to the equipment or injury to
the installer.
Uninstalling Stand Base
Place the LCD TV screen facing down on a
flat surface place where maintained with soft
materials (such as a blanket) for protecting the
display screen.1
Release screw in 6 holes with screw driver.2Pull the stand base out from the cabinet after
all screws already removed.3
Note: For model LCD-42CA9S, release screw
in 10 holes with screw driver.
LCD-CA9S-A NEW.indd 402/06/2008 2:08:50 PM