Sanyo Lcd 37ca9s Owners Manual

							21
BASIC OPERATION
TEXT REVEAL button
TEXT YELLOW button
TXT/TV button
TEXT RED button
OPERATION OF REMOTE CONTROL (IN TEXT MODE)
POWER ON/OFF button
MUTE  button 
NUMERIC  buttonsTEXT CANEL button
TEXT BLUE button
TEXT SUBCODE button
TEXT HOLD  button
TEXT INDEX button
TEXT GREEN button
VOLUME (
{buttonVOLUME  (
y)button
PAGE DOWN (
z) button
Note: In different mode, some buttons have different functions. (For details, please refer to page 11.)
TEXT SIZE  button PAGE UP (
x) button
21211
 
						

							22
BASIC OPERATION
TEXT/ TV
TEXT REVEAL
TEXT CANCEL
Press TXT/TV button to select teletext. Press again will display:
 
v 79PRGH79
:7(;7PRGH
:0,;PRGH
:79
 
v$9PRGH$9
:7(;7PRGH
:0,;PRGH
:$9
Note:

vTEXT mode: TEXT screen is displayed.

vMIX mode: TV/AV (broadcast image) screen and the contents of TEXT(it superimposed) are displayed 
simultaneously. 

vCANCEL mode: TEXT/MIX MODE is canceled temporarily and broadcast image is displayed. However, 
the available key are the same as TEXT mode.

vIn the following state, the TXT/TV button is invalid.

”RF non-signal  (Auto shut off)

”AV non-signal  (Blue back)

vThe TXT/TV button is pressed during the CANCEL mode. The CANCEL mode will be canceled, and it 
will become a TEXT screen.

vPress REVEAL button to reveal hidden items on the text page. 

vSome pages such as quiz pages have the answers hidden. The button may have to be held to keep the 
answer on the screen, or press again to remove the answer.

vIn REVEAL OFF, this indication is not given.

vREVEAL button does not work except a text function. (The recall button usually operates.)

vWhen press the TEXT CANCEL button in TEXT or MIX mode, the TV picture appears on the screen.

vCANCEL mode will be canceled if the button pressed once again.
CANCEL mode is also canceled by the TXT/TV button.

vIn CANCEL mode, CAN is always displayed on the screen upper left.
Press the INDEX button to select the teletext index page in TEXT, MIX, CANCEL mode.
TEXT INDEX
TEXT SUBCODE
1. Press TEXT SUBCODE button, “110/. . . .” will be displayed (e.g. the current page is 110).
2. Press the NUMERIC buttons(0-9) to enter the sub page. For example, to select sub page 4, press    
NUMERIC buttons 0-0-0-4, and 110/0004 will be displayed. 
LCD-CA9S-A NEW.indd   222/06/2008   2:08:19 PM
 
						

							23
TEXT SIZE
Press TEXT SIZE button to enlarge the top half of the text page.
Press TEXT SIZE button again to enlarge the bottom half of the text page.
Press TEXT SIZE button again to return to the normal size page.
O
Note:

vDuring the top half enlargement or the bottom half enlargement mode, if a page request is performed   
by [0] - [9] button and the TEXT INDEX button, it will become the normal mode and a page will be 
requested.

vIf HOLD ON / OFF is performed during the top half enlargement mode, it will still at the top half    
enlargement mode. (A HOLD symbol display )

vIf HOLD ON / OFF is performed during the bottom half enlargement mode, it will still at the bottom half
enlargement mode. (A HOLD symbol not display )
BASIC OPERATION
TEXT HOLD
Press TEXT HOLD button to stop  page request and updating . 

vHOLD ON: The symbol 
 will appear instead of the page number.
Update of TELETEXT is forbidden. It stops on the TEXT screen display now.

vHOLD OFF: A status display will be page number display.

vTELETEXT page data is updated.


						

							24
MENU OPERATION (TV/ AV mode)
All receivable channels are automatically tuned in and memorized 
in consecutive programme position.


						

							25
MENU OPERATION (TV/ AV mode)
The setting for sound system is only active in TV mode.
Press POINT 
{
y buttons repeatedly to select D/K, I, M or B/G until the best sound effect is 
reached.
This feature is used to remove unwanted channels from the channel scanning memory.
You can skip the unused or undesired channels when you are selecting a channel using POINT 
x
z but-
tons.
This function is only active in TV mode.
The settings for sound system, colour system or skip are automatically memorized in the programme 
position.
To swap the channels between two stored programme positions.
Press MENU button to display the main menu.
SOUND SYSTEM
COLOUR SYSTEM
The setting for colour system is only active in TV or AV mode. 
Usually, the colour system is set to the position of AUTO. In case of abnormal colour, repeatedly press 
POINT 
{
y buttons to select AUTO, PAL, SECAM, NTSC or NTSC4.43 until the best colour effect 
is reached. 
SKIP
CHANNEL SWAP
POINT 
{
y buttons to select CHANNEL, and will display 
CHANNEL menu. Press POINT 
x
z buttons to select 
CHANNEL SWAP.
Press POINT 
{
y buttons to enter into the Channel Swap 
menu. Press POINT 
x
z buttons to select the CHANNEL or 
TARGET CHANNEL, then Press POINT 
{
y buttons to set 
the swap channel. And then press POINT 
x
z buttons to 
select SWAPPING item, then press POINT 
{
y buttons to 
select OK.
1
2
3

vPress BACK button to return to the previous menu. 

vPress MENU button or wait for 5~60 seconds (refer to    
DURATION on page 29) to exit menu operation.
LCD-CA9S-A NEW.indd   252/06/2008   2:08:26 PM
 
						

							26
MENU OPERATION (TV/ AV mode)
Note:

”TINT cannot be adjusted when HDMI input.

”TINT cannot be adjusted except in NTSC / NTSC 4.43   
system.
PICTURE
Press MENU button and the main menu will appear. Press 
POINT 
{
y buttons to select PICTURE, and will display 
PICTURE menu.
Press POINT 
x
z buttons to select the item desired.
Press POINT 
{
y buttons to adjust value.
Select PERSONAL, STANDARD, DYNAMIC or SOFT by 
pressing POINT 
{
y  buttons.

”PERSONAL: User presets picture adjustment in PICTURE 
MODE.

”STANDARD: Natural and splendid picture level preset on LCD 
TV.

”DYNAMIC: Bright and dynamic picture. It is suitable for nice 
playback,  such as DVD program.

”SOFT: Inhibit strong contrast and colour, it is beneficial for  eye 
protection.
PICTURE MODE
BRIGHTNESS
Press POINT 
{ button to adjust image darken, and POINT
y
button to adjust image brighten. (0~100)
COLOURPress POINT 
{button to lighten colour, and POINT
ybutton to 
darken colour. (0~100)
TINTPress POINT 
{
y buttons to obtain proper colour. (0~100)
SHARPNESS
Press POINT 
{ button to soften the image, and POINT
ybutton to 
sharpen the image. (0~100)
COLOUR TONEThis function is used for selecting colour temperature. Select 
NORMAL, WARM or COOL with POINT 
{
y buttons.
Press POINT 
{button to decrease contrast, and POINT
ybutton
to increase contrast.  (0~100)
CONTRAST
This function is used for reducing noise interference on the screen. 
Select LOW, MID, HIGH or OFF with POINT
{
y buttons.NOISE REDUCTION
COLOUR ENHANCE
This function can adjust seven kinds of colour. They are RED, 
GREEN, BLUE, CYAN, MAGENTA, YELLOW and FLESH. Press 
POINT
y button to lighter colour, and POINT 
{button to darker 
colour. (0~15)
SCREEN MENU1
2
3
vPress BACK button to return to the previous menu. 

vPress MENU button or wait for 5~60 seconds (refer to    
DURATION on page 29) to exit menu operation.
LCD-CA9S-A NEW.indd   262/06/2008   2:08:30 PM
 
						

							27
MENU OPERATION (TV/ AV mode)
Adjust the balance of the left and right channels. (0~100) Press POINT 
{ button to decrease low frequency sound, and 
POINT 
ybutton to increase low frequency sound. (0~100)
Press POINT 
{
y buttons to select STANDARD, NEWS, 
MUSIC or PERSONAL.
Press POINT 
{ button to decrease high frequency sound, and 
POINT 
ybutton to increase high frequency sound. (0~100)
SOUND
Press MENU button and the main menu will appear. Press 
POINT 
{
y buttons to select SOUND, and will display 
SOUND menu.
Press POINT 
x
z buttons to select the item desired.
Press POINT 
{
y buttons to adjust value.
SOUND MODE
BASS
TREBLE
BALANCE
SCREEN MENU1

vPress BACK button to return to the previous menu. 

vPress MENU button or wait for 5~60 seconds (refer to    
DURATION on page 29) to exit menu operation.
2
3
SELADJBACKEXITBACK
MENU
SOUND MODE
BASS
TREBLE
BALANCE50
5050
SELADJBACKEXITBACK
MENU
SOUND MODE
BASS
TREBLE
BALANCE50
5050 STANDARD
LCD-CA9S-A NEW.indd   272/06/2008   2:08:31 PM
 
						

							28
MENU OPERATION (TV/ AV mode)
TIMER
SELECTADJUSTBACKEXIT
- - : - -ON TIMER
SELADJ BACK
EXIT
ON TIMER CH                                  29OFF
BACKMENU
OFF TIMER
SCREEN MENU
SELECTADJUSTBACKEXIT
- - : - -ON TIMER
SELADJ BACK
EXIT
ON TIMER CH                                  29OFF
BACKMENU
OFF TIMER
Press MENU button and the main menu will appear. Press 
POINT 
{
y buttons to select TIMER, and will display 
TIMER menu.
Press POINT 
x
z buttons to select the item desired.
Press POINT
{
y buttons to adjust value.
Note:

”OFF TIMER and ON TIMER will be automatically cancelled 
during searching channels.

”The settings for OFF TIMER and ON TIMER will be    
automatically cancelled after the settings has been operated 
for one time.

”The LCD TV will turn off automatically if it has not been 
executed any operation in 2 hours.  Once OFF TIMER has been set, when the set time is reached, the 
TV will shift to stand-by status.
OFF TIMER
To select OFF, 30 min, 60 min, 90 min or 120 min with 
POINT 
{
ybuttons.
To cancel OFF TIMER , you can choose any option by  the 
following ways.

”Setting  OFF in OFF TIMER.

”
Pressing POWER ON/OFF button on Side Controls or on 
Remote Control.
To set ON TIMER, you can set any time by NUMERIC buttons.
ON TIMER
To cancel ON TIMER MODE, you can choose any option by 
the following ways.

”Setting - - : - - in ON TIMER by press 0 button repeatedly.

”Disconnecting the AC power cord. Once ON TIMER has been set, you wont miss any opportunity to 
watch the program you like.SELECTADJUSTBACKEXIT
12 : 30ON TIMER
SELADJ BACK
EXIT
ON TIMER CH                                  29OFF
BACKMENU
OFF TIMER
ON TIMER CH
To set channel position, you can set any channel position by 
NUMERIC buttons (Refer to DIRECT SELECTION on page 16.). This function is only active that ON TIMER has been set. When ON 
TIMER is reach, the TV will turn on and enter the channel position 
you set directly .
SELECTADJUSTBACKEXIT
12 : 30ON TIMER
SELADJ BACK
EXIT
ON TIMER CH                                  29OFF
BACKMENU
OFF TIMER
1
2
3

vPress BACK button to return to the previous menu. 

vPress MENU button or wait for 5~60 seconds (refer to    
DURATION on page 29) to exit menu operation.
LCD-CA9S-A NEW.indd   282/06/2008   2:08:32 PM
 
						

							29
MENU OPERATION (TV/ AV mode)
H-POSITION
V-POSITION
DURATION
SEL
ADJBACKEXIT
LANGUAGE
15 SEC
BACK
MENU
TRANSPARENCE
TTX LANGUAGEWESTERN
OSD
Press MENU button and the main menu will appear. Press 
POINT 
{
y buttons to select OSD, and will display OSD 
menu.
Press POINT 
x
z buttons to select the item desired.
Press POINT 
{
y buttons to adjust value.
SCREEN MENU
H-POSITION
V-POSITION
DURATION
SEL
ADJBACKEXIT
LANGUAGE
15 SEC
BACK
MENU
TRANSPARENCE
TTX LANGUAGEWESTERNENGLISH
LANGUAGE
Press POINT 
{
ybuttons to choose ENGLISH, ARABIC or 
RUSSIAN.
H-POSITION
OSD moves to the left side when POINT 
{button is pressed. 
OSD moves to the right side when POINT
ybutton is pressed. 
(0~100)
V-POSITION
OSD moves up when POINT 
{button is pressed.
OSD moves down when POINT
ybutton is pressed. (0~100)
DURATION
Use this function to set the display time of the MENU when there is 
no operation on the TV. 
Press POINT 
{button to decrease time, press POINT
ybutton to 
increase time. (5~60 seconds) 
TRANSPARENCEThe background of OSD darkens when POINT 
{button is 
pressed. The background of OSD lightens when POINT
ybutton
is pressed.  (0~100)
TTX LANGUAGEPress POINT 
{
y buttons to choose WESTERN, EASTERN, 
RUSSIAN, ARABIC, FARSI for  Language display in Teletext mode.
1
2
3

vPress BACK button to return to the previous menu. 

vPress MENU button or wait for 5~60 seconds (refer to    
DURATION on page 29) to exit menu operation.
LCD-CA9S-A NEW.indd   292/06/2008   2:08:33 PM
 
						

							30
MENU OPERATION (TV/ AV mode)
Note:

”PC ADJUST can not be selected except for PC mode.
SYSTEM
SCREEN MENU
Press MENU button and the main menu will appear. Press 
POINT 
{
y buttons to select SYSTEM, and will display 
SYSTEM menu.
Press POINT 
x
z buttons to select the item desired.
Press POINT 
{
y buttons to adjust value.
ECOThis function can automatically adjust panels brightness by 
ambient brightness.
Press POINT 
{
y buttons to set ON or OFF.
CHILD LOCK
When CHILD LOCK is set ON, the Side Control buttons will be 
locked except for POWER ON/OFF button .
1
2
3

vPress BACK button to return to the previous menu. 

vPress MENU button or wait for 5~60 seconds (refer to    
DURATION on page 29) to exit menu operation.`RYNQWONPXReVaONPX
ZR[b
ECO
CHILD LOCK
PC ADJUST
$
`RYNQWONPXReVaONPX
ZR[b
ECO
CHILD LOCK
PC ADJUSTOFF
LCD-CA9S-A NEW.indd   302/06/2008   2:08:35 PM