Sanyo Lcd 32k20a Owners Manual

							11
BEFORE OPERATION
OPERATION OF REMOTE CONTROL
1
23
8 5
OK
INPUT
46
7
9
0
MENU
INFO
PP
MUTE POWER
SPORTS ECOTXT/TV
VOLCH SUBTITLE
WIDE
BACK
TXT HOLDTXT CNL TXT SUB
POWER OFF POWER ON EPG
TXT REVEAL
TXT 
INDEX
TXT SIZE
CS-90283U
FAV/LIST
STILL
Note: In different mode, some buttons have different functions.
POWER ON/OFF
INFO/TXT REVEAL
NUMBER KEY
MUTE
INPUT
TXT/TV
A/B
SPORTS
ECO
VOLUME +/-
POWER OFF
CHANNEL +/-
FAV/LIST
POWER ON
OK
GUIDE
PROGRAM KEY
BACK
TXT HOLD
TXT CNL
TXT BLUE
TXT YELLOW
MENU/TXT INDEX
TXT SIZE
TXT SUB
TXT RED
TST GREEN
 
						

							12
BEFORE OPERATION
OPERATION RANGE
Point Remote Control toward LCD TV (Infrared 
Remote Receiver) whenever pressing the buttons. 
Maxim um  operating range for  Remote Control is 
about 16.4’(5m ) in front, about 30°to the left or the 
right, about 15°for up or down.
30o
5 m
1
5o1
5o
30o
REMOTE CONTROL BATTERIES INSTALLATION
1 Remove the battery compartment cover .2 Insert   two  size AAA  batteries (1.5V ) according 
to “+”  and “-” polarity markings inside the battery 
compartment.
3 Close the battery compartment cover.
To insure safe operation, please observe the following precautions: 
Use (2) AAA, alkaline batteries.
Replace two batteries at the same time.
Do not use a new battery with a used battery.
Avoid contacting with water or liquid.
Do not expose the Remote Control or Batteries to moisture, or heat such as sunshine,fire or the like.
Do not drop the Remote Control.
If a battery has leaked on the Remote Control, carefully wipe case clean and install new batteries.
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.•
•
•
•
•
•
•
•
•
 
						

							13
BEFORE OPERATION
ON-SCREEN MENU
TV/AV MODE MENU LIST
MAIN MENU (CHANNEL MENU)
DTV Menu...
ˆTIMER
‰
Confirm        Return        Navigate          CancelMENUOK
Time Setting
Power Control
Banner DurationCurrent Time
WakeUp Timer         After      00    Hours       00   Minutes
Sleep Timer         After      00    Hours 00   Minutes
BACK
2008  -   01  -   06        19  :   57  :   29
DTV Menu...
ˆFUNCTION
‰
Confirm        Return        Navigate          CancelMENUOK
Reset to default
AV Connection
Password
Parental Rating
Channel Lock
EPG
BACK
DTV Menu...
ˆSETUP
‰Menu LanguageEnglish
Confirm        Return        Navigate          Cancel
MENUOK
Language
Country/Region
Full Search
Quick Search
Manual Search
Channel List
Fav Group: 1
BACK
DTV Menu...
ˆAUDIO
‰
Confirm        Return        Navigate          CancelMENUOKBACK
MTS
Dual
Selectable Sound
Bass Boost
Virtal SurroundAuto
DTV Menu...
ˆPICTURE
‰Picture Mode
Color Temp
Aspect Ratio
Backlight
DNRAuto Conrrast Enhancement
Picture ModeOn
Dynamic
Contrast
Brightness
Color
Sharpness
Tint
Confirm        Return        Navigate          CancelMENUOKBACK
50
50
50
0
0
DTV Menu...
ˆPICTURE
‰Picture Mode
Color Temp
Aspect Ratio
Backlight
DNRAuto Conrrast Enhancement
Picture ModeOn
Dynamic
Contrast
Brightness
Color
Sharpness
Tint
Confirm        Return        Navigate          CancelMENUOKBACK
50
50
50
0
0
Note : “SET UP” menu is only active in TV mode.
PICTURE MENU
AUDIO MENU
SETUP MENU
TIMER MENU
FUNCTION MENU
 
						

							14
ON-SCREEN MENU
PC/HDMI MODE MENU LIST
MAIN MENU (PICTURE MENU)
DTV Menu...
ˆTIMER
‰
Confirm        Return        Navigate          CancelMENUOK
Time Setting
Power Control
Banner DurationCurrent Time
W akeUp Timer         After      00
    Hours       00
   Minutes
Sleep Timer         After      00
    Hours 00
   Minutes
BACK
2
0
0
8 -   01
 -   06
        19
 :   57
 :   29
DTV Menu...
ˆAUDIO
‰
Confirm        Return        Navigate          CancelMENUOKBACK
MTS
Dual
Selectable Soun d
Bass Boost
Virtal SurroundAuto
DTV Menu...
ˆFUNCTION
‰
Confirm        Return        Navigate          CancelMENUOK
Reset to default
AV Connection
BACK
DTV Menu...
ˆPICTURE
‰Picture Mode
Color Temp
Aspect Ratio
Backlight
VGA SetContrast
Brightness
Color
Confirm        Return        Navigate          Cancel
MENUOKBACK
50
50
50
DTV Menu...
ˆSETUP
‰Menu LanguageEnglish
Confirm        Return        Navigate          Cancel
MENUOK
Language
BACK
DTV Menu...
ˆPICTURE
‰Picture Mode
Color Temp
Aspect Ratio
Backlight
VGA SetContrast
Brightness
Color
Confirm        Return        Navigate          Cancel
MENUOKBACK
50
50
50
Note : 1. “PC ADJUST” is only active in PC mode.
2. SOUND/TIMER/OSD menu in PC/HDMI mode is the same as TV/AV mode, please refer to page 13~14.
PICTURE MENU
AUDIO MENU
SETUP MENU
TIMER MENU
FUNCTION MENU
BEFORE OPERATION
 
						

							15
BASIC OPERATION
TURNING ON/OFF LCD TV
1!Complete the peripheral connections before turning on LCD TV. (Please refer to “CONNECTING LCD 
TV”.)
2!Connect LCD TV ‘s AC Power Cord into an AC outlet.
3!Press POWER ON/OFF button on Side Controls of LCD TV or on Remote Control to turn it ON. The 
POWER indicator will light up (green). Press POWER ON/OFF button again to shift it to stand-by status, 
the POWER indicator will become red. 
NO SIGNAL SHUT OFF 
This TV set incorporates the NO SIGNAL SHUT OFF function. If no signal is input in TV mode, “OFF 00:15” 
will display for about 15 minutes and TV will be turned off automatically. 
SELECTING INPUT SOURCE
Select mode “DTV”, “VIDEO 1”, “VIDEO 2”, “VIDEO 3”, “HDMI 1”,“HDMI 2”,
“HDMI 3”,“PC”,“ATV”,  by pressing INPUT button on Remote Control or on Side 
Controls.
CHANNEL SELECTION
There are 256 channels can be selected on the LCD TV. 
DIRECT SELECTION
For direct access to program using the (0-9) numeric button. 
1) For selection of channel position 0-9. Example: For channel position 8, press the “8”button. 
2) For selection of channel position 10 - 99. For channel position 25, press the DIGIT button to display “- -”, 
then press “2” and “5” buttons. 
3) For selection of channel position 100 - 199. For channel position 125, press the DIGIT button twice to 
display “1 “, then press “2” and “5” buttons. 
4) For selection of channel position 200 - 255. For channel position 235, press the DIGIT button three times 
to display “2 “, then press “3” and “5” buttons. 
CHANNEL UP/DOWN
3UHVV32,17RVHOHFWSURJUDPV


						

							16
BASIC OPERATION
SELECTING CHANNEL SOURCE
Press button to switch between the previous channel and the current channel. 
For example, now you are watching channel “4”, but you watched channel “2” previously. If you press     
button, channel “2” will appear immediately. 
SOUND SYSTEM
Press SOUND SYSTEM button repeatedly to select “D/K”, “I”, “B/G “ or “Auto” until the best sound effect is 
reached.
COLOUR SYSTEM
Press COLOUR SYSTEM  button then you can see display.
DISPLAY
Press DISPLAY button on Remote Control to display the status of LCD TV. Press again to remove the 
display. 
AT V
DTV
 
						

							17
VOLUME CONTROL
To adjust  the volume value desired by pressing POINT buttons on Remote Control or  on Side Controls. 
The volume dialogue box will appear on the screen for a short while.POINT button to increase volume, and 
POINT  button to decrease volume. 
ECO
This function is used to automatically adjust panel’s brightness by ambient brightness. Press ECO button on 
Remote Control to set “ECO 1“, “ECO 2 “, “ECO 3 “ or “ECO OFF”. 
VIRTUAL SURROUND
Wonderful Virtual Surround has set in the TV, you can enjoy splendid Virtual Surround effect in your family. 
Press Menu button on Remote Control to set “Virtual Surround On “ or “Virtual Surround OFF”. 
Select this mode for user to call out the preset sound adjustment in SOUND menu.
STILL
Press TXT HOLD button to switch the still function On or Off.
When in PIP mode, still function can still main picture.
To cancel “Still” function:
Press  TXT HOLD button or  PIP button to cancel the function, or you can switch the input source to cancel 
it also.
Note:When the still function is On, the picture will still, but thesound will be remain.
The function doesn’t work when the input signal is 1080p.
STEREO/MONO
Simply press STEREO/MONO button to select the following audio signals: “STEREO “, “MONO “, “NICAM “, 
“A “ and “B “. 
BASIC OPERATION
 
						

							18
ASPECT RATIO
Select screen size among “Wide”, “Super Live 2 “, “Cinema2”,
“4:3”,“Super Live 1”,“Cinema 1”, “Subtitle”,“14:9” and “Auto” by 
pressingWIDE button on Remote Controls.
  
*Only “Wide”and“4:3” mode can be selected when the input 
mode is “VGA”, “HDMI” and the input signal is 1080i, 720p or 
1080p.
WIDE
Use this setting when watching a widescreen DVD,widescreen
video tape or a 16:9 broadcast (when available).
Due to the range of widescreen formats (16:9,14:9,20:9 etc.)
black bars may be visible on the top and bottom of the screen.
SUPER LIVE 2
If a‘side panel format’signal is being received this setting will.
enlarge the image to fit the screen by stretching the image 
horizontally and vertically, holding better proportions at the 
centre of the image. Some distortion may occur.
CINEMA 2
When watching ‘all sides panel format’ films/video tapes, this 
setting will eliminate or reduce the black bars at all sides of 
the screen by zooming in and selecting the image without 
distortion.
4:3
Use this setting to view a true 4:3 broadcast.
SUPER LIVE 1
This setting will enlarge a 4:3 image to fit the screen by 
stretching the image horizontally and vertically, holding better 
proportions at the centre of the image. Some distortion may 
occur.
CINEMA 1
When watching ‘letterbox format’ films/video tapes, this setting 
will eliminate or reduce the black bars at the top and bottom 
of the screen by zooming in and selecting the image without 
distortion.
SUBTITLE
When subtitles are included on a letterbox format broadcast, this.
setting will raise the picture to ensure.
that all the text is displayed.
14:9
Use this setting when watching a 14:9 broadcast.
AutoWIDE button
S U
P
E
R
 
L
I
V
E
 1
S
U
P
E
R
 
L
I
V
E
 2
C
I
N
E
M
A1
C
I
N
E
M
A2
SUBTITLESUBTITLE
W
IDE
4
:
3
1
4
:
9
A u
t
o
BASIC OPERATION
 
						

							19
TIMMER SETTING
To set TIMER SETTING by pressing TIMER Menu on remote control. The timer dialogue box will appear on the 
screen for a short while.
To select “WakeUP Timer” or ” Sleep Timer” with TIMER buttons. 
SPORTS
Select sports mode “Field Game”, “Winter Sport”, “Marine Sport”, 
and “Indoor Sport” by pressing SPORTS button repeatly on 
Remote Controls
/
Field Game
(Picture)
Emphasize vivid greenof the glass. High contrast, deep black for 
the bright scene.
(Sound)
Emphasize surrounded cheers and sound of hitting the ball.
WINTER SPORT
(Picture)
Reduce white saturation of snow. Emphasize primary colors of the 
skiing suit by slightly reducing contrast and brightness and slightly 
increase the color gain.
(Sound)
Emphasize mid and high range of sound (sliding sound of skiing 
and skating)
MARINE SPORT
(Picture)
Emphaszie blue sky and blue ocean with high contraast with deep 
black.
(Sound)
Emphasize the sound of waves.
INDOOR SPORT
(Picture)
Emphasize red and skin color and clarify the figures in the dark 
stadium.
(Sound)
Emphasize surrounded cherrs and sound of bumping bodies. 
Clear voice of an announcer.SPORT button
TEXT / TV
Press TXT/TV button to select teletext. Press again will display: 
79PRGH79
:7(;7PRGH
:0,;PRGH
:79
$9PRGH$9
:7(;7PRGH
:0,;PRGH
:$9
Note:
TEXT mode: TEXT screen is displayed. 
MIX mode: TV /AV (broadcast image) screen and the contents of TE XT(it superim posed) are displayed 
simultaneously. 
CANCEL mode: TEXT/MIX MODE is canceled temporarily and broadcast image is displayed. Ho
wever, the 
available key are the same as TEXT mode. 
In the following state, the TXT/TV button is invalid.
RF non-signal  (Auto shut off) 
AV non-signal  (Blue back) 
The TXT/TV button is pressed during the CANCEL mode. The CANCEL mode will be canceled, and it 
will 
become a TEXT screen. 

v

v

v

v

v

v

v

v

v
BASIC OPERATION
 
						

							20
TEXT CANCEL
When press the TEXT CANCEL button in TEXT or MIX mode, the TV picture appears on the screen. CANCEL 
mode will be canceled if the button pressed once again. 
CANCEL mode is also canceled by the TXT/TV button. 
In CANCEL mode, “CAN “ is always displayed on the screen upper left. 
TEXT INDEX
Press the INDEX button to select the teletext index page in TEXT, MIX , CANCEL mode. 
TEXT SUBCODE
1. Press TEXT SUB CODE button, 110/. . . .will be displayed (e.g. the current page is 10).
2. Press the NUMER IC buttons(0-9) to enter the sub page. For example, to select sub page 4, press NUMERIC 
buttons 0-0-0-4, and “110/0004” will be displayed. 
TEXT SIZE
Press TEXT SIZE button to enlarge the top half of the text page. 
Press TEXT SIZE button again to enlarge the bottom half of the text page. Press TEXT SIZE button again to 
return to the norm al size page. 
O
Note:
During the top half enlargement or the bottom half enlargement mode, if a page request is performed by [0] - [9] 
button and the TEXT INDEX button, it will become the normal mode and a page will be requested. 
If HOLD ON / OFF is performed during the top half enlargement m ode, it will still at the top half enlargement 
mode. (AHOLD symbol display ) 
If HOLD ON / OFF is performed during the bottom half enlargement mode, it will still at the bottom half 
enlargement m ode. (AHOLD symbol not display ) 
TEXT HOLD
Press TEXT HOLD button to stop page request and updating. 
HOLD ON: The symbo 
 will appear instead of the page number. 
Update of TELETEXT is forbidden. It stops on the TEXT screen display now. HOLD OFF: A status display will be 
page number display.
TELETEXT page data is updated. 
A screen is updated by reception of the UPDATE signal.
A screen is eliminated by reception of an ERASE signal. 
TEXT HOLD button does not work except a text function. 
TEXT RED
The page of a red prompt is required. (also cancel mode) 
TEXT GREEN
The page of a green prompt is required. (also cancel mode) 
This button does’s work except for TEXT mode . 
TEXT YELLOW
The page of a yellow prompt is required. (also cancel mode) 
This button does’s work except for TEXT mode . 
TEXT BLUE
The page of a blue prom pt is required. (also cancel mode) 

v

v

v

v

v

v

v

v

v

v

v

v
BASIC OPERATION