Sanyo Lcd 32k20a Owners Manual

							Owner’s Manual
LCD TV
MODEL LCD-19E30A
LCD-26E30A
LCD-32E30A
LCD-42E30FA
 
						

							2
Before operating this LCD TV, read this manual thoroughly and operate the LCD TV properly. 
This LCD TV provides many convenient features and functions. Operating the LCD TV properly enables you to 
manage those features and maintains it in better condition for a considerable time.
Improper operation m ay result in not only shortening the product-life, but also malfunctions, fire hazard, or other 
accidents.
If your LCD TV seem s to operate improperly, read this manual again,  check operations and cable connections 
and try the solutions in the “Troubleshooting” section on page 40 of this booklet. If the problem still persists, 
contact the dealer w here you purchased the LCD TV or the service center. 
    Safety Precaution 
WARNING :TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE 
TO RAIN OR MOISTURE. 
Install the LCD TV in a proper position. If not, it 
may result in a fire hazard. 
Provide appropriate space on the top, sides 
and rear of the LCD TV cabinet for allowing air 
circulation and cooling the LCD TV.
Minimum clearance must be maintained.  If the 
LCD TV is to be built into a compartment or 
similarly enclosed, the minimum distances must be 
maintained. Do not cover the ventilation slot on the 
LCD TV. Heat build-up can reduce the service life 
of your LCD TV, and can also be dangerous.
If the LCD TV is not to be used for an extended 
time, unplug the LCD TV from the power outlet. •
•
•
•
!
READ AND KEEP THIS OW NER’S MANUAL FOR LATER USE.
Caution In Installing
Handle the LC D TV carefully w hen installing it and do not drop.
Locate set aw ay from heat, excessive dust, and direct sunlight.
For correct installation and mounting it is strongly recommended to use a trained, authorized dealer. 
Failure to follow correct mounting procedures could result in dam age to the equipment or injury to the 
installer. 
NOTE : 
When LCD TV is not used for a long period of time, unlighted dots m ay be observed. This is caused by 
characteristic of the LCD TV. If this occurs, turn the LCD TV on and leave it on about 1 hour. These dots will 
gradually disappear. 
CAUTION
RISK OF ELECTRIC SHOCK 
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). 
NO USER-SERVICEABLE PARTS INSIDE.  REFER SERVICING TO QUALIFIED SERVICE 
PERSONNEL.
THIS   SYMBOL   INDICATES   THAT 
DANGEROUS VOLTAGE CONSTITUTING 
A RISK OF ELECTRIC SHOCK IS RESENT 
WITH THIS UNIT.THIS SYMBOL INDICATES THAT THERE 
ARE IMPORTANT OPERATING AND 
MAINTENANCE INSTRUCTIONS IN THE  
OWNER’S MANUAL WITH THIS UNIT.
•
•
•
TO THE OWNER
 
						

							3
All the safety and operating instructions should be
read before the product is operated.
Read all of the instructions given here and retain them 
for later use. Unplug this LC D TV from AC power 
supply before cleaning. Do not use liquid or aerosol 
cleaners. Use a damp cloth for cleaning.
Follow all warnings and instructions marked on the 
LCD TV.
For added protection to the LCD TV during a lightning 
storm, or when it is left unattended and unused for 
long periods of time, unplug it from the wall outlet. This 
will prevent dam age due to lightning and power line 
surges.
Do not expose this unit to rain or use near water...for  
example, in a wet basement, near a swimming pool, 
etc...
Do not use attachments not recommended by the 
manufacturer as they may cause hazards.
Do not place this LCD TV on an unstable cart,stand, 
or table.  The LCD TV may fall, causing serious injury 
to a child or adult,  and serious damage to the LCD 
TV. Use only with a cart or stand recommended by 
the manufacturer, or sold with the LCD TV. Wall or 
shelf mounting should follow the manufacturer’s 
instructions, and should use a mounting kit approved 
by the manufacturers.
An appliance and cart combination should be 
moved with care. Quick stops, excessive force, and 
uneven surfaces m ay cause the appliance and cart 
combination to overturn.
Slots  and  openings  in  the  back  and 
bottom of the cabinet are provided  for 
ventilation, to insure reliable operation 
of the equipment and to protect it from 
overheating.
The openings should never be covered with cloth or  
other  materials, and the bottom opening should not 
be blocked by placing the LCD TV on a rug, or other 
similar surface. This LCD TV should never be placed 
near or over a radiator or heat register.
This LCD TV should not be placed in a built-
in installation such as a book case unless proper 
ventilation is provided.
Never push objects of any kind into this LCD TV 
through cabinet slots as they may touch dangerous 
voltage points or short out parts that could result in a 
fire or electric shock. Never spill liquid of any kind on 
the LCD TV.
Do not place item s such as vases containing liquid on 
top of the LCD TV.Do not install the LCD TV near the ventilation duct of 
air-conditioning equipment.
This LCD TV should be operated only from the type 
of power source indicated on the marking label. If you 
are not sure of the type of power supplied,onsult your 
authorized dealer or local power company.
Do not overload wall outlets and extension cords as 
this can result in fire or electric shock. Do not allow 
anything to rest on the power cord. Do not locate this 
LCD TV where the cord may be damaged by persons 
walking on it.
Do not attempt to service this LCD TV yourself 
as opening or removing covers may expose you 
to dangerous voltage or other hazards. Refer all 
servicing to qualified service personnel.
Unplug this LCD TV from wall outlet and refer 
servicing to qualified service personnel under the 
following condition:
When the power cord or plug is damaged or rayed.
If liquid has been spilled into the LCD TV.
If the LCD TV has been exposed to rain or water. 
If the LCD TV does not operate normally byfollowing 
the operating instructions. Adjust only those controls 
that are covered by the operating instructions as 
improper adjustment  of other controls may result in 
damage and will often require extensive work by a 
qualified technician to restore the LCD TV to normal 
operation.
If the LCD TV has been dropped or the cabinet has 
been damaged.
When the LCD TV exhibits a distinct change in 
performance-this indicates a need for service.
When replacement parts are required, be sure 
theservice technician has used replacement parts 
specified by the manufacturer that have the same 
characteristics as the original part.  Unauthorized 
substitutions may result in fire, electric shock, or injury 
to persons.
Upon completion of any service or repairs to this 
LCD TV, ask the service technician to perform routine 
safety checks to determine that the LCD TV is in safe 
operating condition. 
a.
b.
c.
d.
e.
f.
            SAFETY  INSTRUCTIONS
 
						

							4
TABLE
SAFETY  INSTRUCTIONS ........................3
FEATURE AND DESIGN ...........................5
PREPARATION ..........................................6
PARTNAMES AND  FUNCTIONS.............6
PREPARATION ..........................................7
CONNECTING LCD TV .............................8
CONNECTING THE AC POWER CORD.8
CONNECTING OUTDOOR AERIAL ........8
CONNECTING A  COMPUTER ................9
CONNECTING VIDEO EQUIPMENT ....10
BEFORE OPERATION ............................ 11
OPERATION OF REMOTE CONTROL . 11
TURNING ON/OFF LCD TV ..................15
SELECTING INPUT SOURCE ..............15
CHANNEL SELECTION.........................15
SELECTING CHANNEL SOURCE ........16
SOUND SYSTEM ..................................16
COLOUR SYSTEM ................................16
DISPLAY ................................................16
VOLUME CONTROL .............................17
ECO .......................................................17
VIRTUAL SURROUND ..........................17
STILL......................................................17
STEREO/MONO ....................................17
ASPECT RATIO .....................................18
TIMMER SETTING ................................19
SPORTS ................................................19
TEXT / TV ..............................................19
TEXT CANCEL ......................................20
TEXT INDEX ..........................................20
TEXT SUBCODE ...................................20
TEXT SIZE .............................................20
TEXT HOLD ...........................................20
TEXT RED .............................................20
TEXT GREEN ........................................20
TEXT YELLOW ......................................20
TEXT BLUE ...........................................20
MENU OPERATION (TV/AV mode) ........21
TUNING THE TV FOR THE FIRST TIME 21
PICTURE ...............................................22
AUDIO....................................................25SETUP ...................................................27
TIMER ........................................................
FUNCTION ................................................
MENU OPERATION (PC/HDMI mode)....35
PICTURE ...............................................35
AUDIO....................................................35
SETUP ...................................................36
TIMER ....................................................36
FUNCTION ............................................36
APPENDIX ...............................................37
CLEANING LCD TV ...............................37
FUNCTION OF PRODUCT SAFETY 
FEATURE ..............................................37
TROUBLESHEETING............................38
specifications .........................................39
 
						

							5
FEATURE AND DESIGN
Picture
LCD Panel
1920 x 1080 pixel Full HD LCD Panel makes perfect 
reproduction of 1080p/1080i HD contents in pixel-to-
pixel. ( for 42” HD panel)
1366 x 768 pixel LCD Panel markes perfect 
Reproduction of 1080p/1080i HD contents in pixel-
transfer to -pixel.
Video Enhance Engine
Video Enhance Engine, SANYO Hight Quality image 
Processing Technology rocessing clear. dynamic, 
natural and realistic Picture along with HD/SD LCD 
Panel Technology.
Dynamic AC
The AC (Automatic image Control) circuit  
compensates picture contrast and brightness level 
dynamically and reproduces bright and hight-contrast 
picture. (see page 22,23)
Sound
NICAM/A2 Stereo
It’s the Stereo Sound PAL Color TV Broadcasting 
System upgrading Mono-sound TV serice to stereo or 
dual-language sound.(see page 25)
Bass Boost
Bass Boost providing powerful sound markes viewing 
experience bass Boost sound. (see page 24)
Virtural Surround
Virtural Surround providing powerful sound markes 
viewing experience Virtural Surround.
Feature
Super ModeJust by pressing the button, sport mode optimizes 
picture and audio settings suitable for each sport 
program.
(see page 19)
Colorful World
Dynamic picture and sound performance setting 
(Default setting).
Green Field
Suitable setting for Football, Golf program etc.
Snow World
Suitable setting for Skiing, Ice Skating program etc.
Water World
Suitable le setting for Swimming, Diving program 
etc.
Indoor Sport
Suitable setting for Basketball, Boxing program etc.

‡
•
•
•

‡
•
•
•

‡
•

v

v

v

v

v
Feature
Auto ECO
Automatically adjust by ECO 1/ECO 2/ECO 3.
Light Senson formation
Ambient light  sensor  automatically adjusts
picture brightness to provide more relaxing view for 
your eyes. (see page 16)
Compatibilty
Full Multy System
PAL, SECAM, NTSC, NTSC 4.43 system can be 
connected. (see page 16)
HD-Ready
1080p, 1080i, 720,  High Definition signals are 
receivable.
HDMI
HDMI provides complete transmission of digital image 
and sound signals without any quality deterioration.
DVI can be connected to HDMI.
PC Input
Personal Computer/Laptop can be connected 
with automatic resolution adjustment.
Terminals
HDMI for BluRay Player etc.
D -SUB 15-pin for PC input etc.
Component Video for DVD
S-Video/Video for VCR /DVD
Others
Wall Mounting
It’s designed for VESA Standard wall hanging bracket.
Light Commertial Mode
By entering Dealer m ode, Volume Lock, Sart Mode, 
OSD, RC, Reset, AC Power Mode can be selected.
Convenient  for placing in Hotel,  Hospital, School, S 
tore, Bank etc. 

‡
•
•

‡
•
•
•
•
•

‡
•
•
 
						

							6
PREPARATION
PARTNAMES AND  FUNCTIONS
FRONT
INDICATORS
CARE FOR USING LCD TV
Do not bump or scratch the panel surface as this causes flaws on the surface of the screen.
There may be some tiny black points and/or blight points on the SCREEN. These points are normal. •
•
Panel
Indicator
Side Controls
IRLight Sensor
LED
For exsample : 26” For exsample : 26”
For exsample : 26”
 
						

							7
PREPARATION
SIDE CONTROLS(Each button on the control panel has the same function with its counterpart on the remote control.)
POWER
CHANNEL
VOLUME
MENU
INPUT
OK
>PC<
BACK TERMINALS
INPUT1DVI
VIDEO3
INPUTVIDEO1 INPUT
PC INPUT RS232 INPUT
PC AUDIO
INPUT
L
RL
R Pr PbY
R
VIDEODIGITALAUDIOOUTPUT
ANT LVIDEOOUTPUT
S-VIDEOVIDEO
VIDEO3
INPUTVIDEO1 INPUT
PC INPUT RS232 INPUT
ANT S-VIDEO
L
R Pr PbY INPUT1
DVIINPUT2
VIDEOL
RPC AUDIO
INPUTD
IGITALAUDIOOUTPUT
VIDEOOUTPUT
VIDEO3
INPUTVIDEO1 INPUT VIDEOOUTPUT
PC INPUT RS232 INPUT
ANT S-VIDEO
RL
R Pr PbY INPUT1
DVIINPUT2INPUT3
VIDEOLVIDEOL
RPC AUDIO
INPUT
DIGITALAUDIOOUTPUT
VIDEOL
R
POWER ON/OFF button
CHANNEL UP/DOWN buttons
VOLUME UP/DOWN buttons
MENU button
INPUT MODE button Used to turn the LCD TV ON or OFF.
Used to Change channels.
Used to select items.
Used to adjust the volume.
Used to adjust the value of the 
selected item on On-Screen Menu.
Used to execute the seleted menu on 
On-Screen menu.
Open or Close the On-Screen Menu.
Used to select input source:DTV, AV1, 
AV2, AV3, HDMI 1, HDMI 2, HDMI 3, 
PC, ATV.
HDMI Input Terminal
Connect all kinds of HDMI output equioment 
to this terminal.
• HDMI Cable
PC Audio  Input Terminal
RS-232 Input TerminalDIGITAL AUDIO  OUTPUT Terminal
Aerial Jack
VIDEO Input Terminal
HDMI Input Terminal
VIDEO Output Terminal
Video Input Terminal
PC Input Terminal
Connect all kinds of HDMI output 
equioment to this terminal.
• HDMI CableConnect computer outputs to these terminals
• RGB (D-SUB)
HDMI Input Terminal
Connect all kinds of HDMI output equioment 
to this terminal.
• HDMI Cable Connect video and audio output from video 
equipment.
• Video (RCA type)
• Audio L and R (RCA type)
• S-Video (mini Din 4 type) Connect computer outputs to these terminals
• Audio  (L/R)
Connect the cable with a plug from aerial jack 
to the aerial socket on the cabinetback.
Connect video and audio output from 
video equipment.
• DVD component (RCA type)
• Audio L and R (RCA type) Connect a television, video recorder 
or external audio amplifier to these 
jacks.
• Video (RCA type)
• Audio L and R (RCA type)19”
26”
32”/42”For exsample : 26”
 
						

							8
CONNECTING LCD TV
CONNECTING THE AC POWER CORD
CONNECTING OUTDOOR AERIAL
ANT
This LCD TV uses nominal input voltages of 100-240V 
AC. This LCD TV automatically selects the correct input 
voltage. It is designed to work with single-phase power 
systems. To reduce risk of electrical shock, do not plug 
into any other type of power system . Consult your 
authorized dealer or service station if you are notsure of 
the type of power being supplied. 
Connect the LCD TV with all peripheral equipment 
before turning the LCD TV on.
CAUTION
For  safety, unplug AC power cord when the LCD 
TV is not in use. 
Cable used for connection (This Outdoor 
Aerial cable is not supplied with this LCD TV.) 
Aerial Cable 
NOTE:
For all aerial circuit problems please consult 
your local dealer. 
•
To the AC Outlet (100-240V AC) Pulls the 
AC power cord out from the LCD TV. The 
AC outlet must be near this equipment 
and must be easily accessible.
AC POWER CORD
For exsample : 26”
For exsample : 26”
 
						

							9
CONNECTING LCD TV
CONNECTING A  COMPUTER
Cable used for connection (This cable is not supplied 
with this LCD TV.)
PC/VGA Cable (D-SUB 15pin)
HDMI Cable
MAC Adapter (in the case of connecting Macintosh 
computer)
Audio Cable [Mini Plug (L/R)]
•
•
•
•
NOTE:
When connecting the cable, AC Power 
Cords of both LCD TV and external 
equipment should be disconnected from  
AC outlet. Turn LCD TV and peripheral 
equipment on before your computer is 
switched on.
NOTE : You can connect the DVI source to HDMI input terminal by using the DVI to HDM I converter, and you just 
can watch image, but without sound. 
VIDEO3
INPUTVIDEO1 INPUT
PC INPUT RS232 INPUT
ANT S-VIDEO
L
RL
R Pr PbY INPUT1
DVIINPUT2
VIDEO
VIDEO
L
RPC AUDIO
INPUTD
IGITALAUDIOOUTPUT
VIDEOOUTPUT
IBM-
compatible
computers
or Macintosh 
computers
(VGA/SVGA/
XGA)Desktop Type Laptop Type
Audio Output
(stereo)
Audio Input
(stereo) HDMI Input
PC Input MAC
Adapter Monitor
OutputHDMI Output
For exsample : 26”
 
						

							10
CONNECTING VIDEO EQUIPMENT
Cables used for connection  (These cables are not supplied with this LCD TV.) 
Video Cable (RCA X 1), S-Video Cable, Audio Cable (RCA X2) : Video 1 or Video 2
Video Cable (RCA X3), Audio Cable (RCA X 2) : DVD (Component Video) 
Video Cable (RCA X 1), Audio Cable (RCA X2) : Monitor Outputs 
HDMI Cable: HDMI Input 
VIDEO3
INPUTVIDEO1 INPUT
PC INPUT RS232 INPUT
ANT S-VIDEO
L
RL
R Pr PbY INPUT1
DVIINPUT2
VIDEO
VIDEO
L
RPC AUDIO
INPUTD
IGITALAUDIOOUTPUT
VIDEOOUTPUT
•
•
•
•
CONNECTING LCD TV
NOTE : When connecting the cable, AC Power Cords 
of both LCD TV and external equipment should be 
disconnected from AC outlet.
HDMI cable
HDMI Output
HDMI Input
Video cable
(RCA x1)
Audio cable
(RCA x2)
External Audio
Equipment Audio Amplifier
Audio
Speaker
(stereo) External
Monitor Composite
Video and 
Audio Output
AV OUT
Note:
Video (RCA) output is for TV, AV or S-VIDEO only.DVD
(RCA x3)
Audio cable
(RCA x2)
Component Video Source 
(example)
DVD video equipment 
(such as DVD player 
or high-definition TV 
source)
R  L       Pr, Pb, Y
Video and Audio 
cable (RCA x3)S-Video cable
R,  L, V    S-Video
Video Source (example)S-Video output
Video Cassette
RecorderVideo Disc 
Player
For exsample : 26”