Sanyo DP55441 Hdtv Lcd Owners Manual

							20
English
ADJUSTING THE AUDIO LEVELS 
TREBLE/ BASS/ BALANCE OPERATION
1 Press the MENU button on the remote control to 
display the Main menu.
2 Use the CURSOR ◄	and	►	buttons	to	highlight	AUDIO. Press the OK button.
3 Use the CURSOR  ▲	and	▼	but tons	to	sel ect	Tre ble, 
Bass  or Balance . Press the  OK button.
4 Use the CURSOR ◄	and	►	buttons	to	adjust	the	audio setting.
BASS BOOST OPERATION
1 Press the MENU button on the remote control to 
display the Main menu. 
2 Use the CURSOR ◄	and	►	buttons	to	highlight	AUDIO. Press the OK button.
3 Use the CURSOR ▲	and	▼	buttons	to	highlight	Bass Boost. Press the OK button.
4 Use the CURSOR ▲	and	▼	buttons	to	highlight	Off, Low or High . Press the OK button. 
SURROUND OPERATION
1 Press the MENU button on the remote control to 
display the Main menu. 
2 Use the CURSOR ◄	and	►	buttons	to	highlight	AUDIO. Press the OK button.
3 Use the CURSOR ▲	and	▼	buttons	to	highlight	Surround. Press the OK button.
4 Use the CURSOR ▲	and	▼	buttons	to	highlight	Off, Low or High . Press the OK button. 
HDMI AUDIO OPERATION 
HDMI AUDIO SETTINGS  
HDMI1 includes three categories, Auto, Digital and 
Analog. (Default setting is Auto)
For the other HDMI port, the HDMI Audio setting will be 
blocked out and fixed in Digital.
Auto- During this setting, the system will analyze 
HDMI1 signal type (by info frame) to detect if this input 
source is pure HDMI or DVI signal. Then it will select 
the audio input signal from HDMI port or PC AUDIO 
INPUT port automatically (refer to page 13).
Digital- During this setting, the audio input signal will be 
fixed to the HDMI1 port.
NOTE : If the HDMI is a DVI signal type, there will be no  sound output.
Analog- During this setting, the audio input signal will 
be fixed to PC AUDIO INPUT port.
NOTE : Even though the HDMI is pure HDMI type, the audio still is selected from the PC AUDIO INPUT port.
1 Press the MENU button on the remote control to 
display the Main menu.
2 Use the CURSOR ◄	and	►	buttons	to	highlight	AUDIO. Press the OK
 button.
3 Use the CURSOR ▲	and	▼	buttons	to	highlight	HDMI Audio. Press the  OK button. 
4 Use the CURSOR ▲	and	▼	buttons	to	select	Auto, Digital or Analog option. Press the OK 
button. (A red hook will appear in the white blank 
space).
RESET AUDIO OPERATION
Reset Audio-  It can reset previous adjusting settings during 
the AUDIO mode to the factory default value.
1 Use the CURSOR ◄	and	►	buttons	to	highlight	AUDIO. Press the OK  button.
2 Use the CURSOR ▲	and	▼	buttons	to	highlight	the Reset Audio. Press the OK button.
3 Use the CURSOR ▲	and	▼	buttons	to	select	Reset or Cancel. Press the OK button.
NOTE : Press the MENU button to return to the AUDIO menu.
ADVANCED
SPORTS OPERATION (See PAGE 14)
1 Press the MENU button on the remote control to 
display the Main menu.
2 Use the CURSOR ◄	and	►	buttons	to	highlight	ADVANCED. Press the 
OK button.
3 Use the CURSOR ▲	and	▼	buttons	to	select	Sports. Press the OK button.
4 Use the CURSOR ▲	and	▼	buttons	to	select	Off, Football, Winter Sports, Marine Sports or  
Indoor Sports. Press the OK button.
NOISE REDUCTION OPERATION
1 Press the MENU button on the remote control to 
display the Main menu.
2 Use the CURSOR ◄	and	►	buttons	to	highlight	ADVANCED. Press the  OK button.
3 Use the CURSOR ▲	and	▼	buttons	to	select	Noise Reduction. Press the OK  button.
4 Use the CURSOR ▲	and	▼	buttons	to	select	Off, 
W
eak, Medium or Strong. Press the OK button. 
DVD player, cable/satellite box and digital camera   
						

							21
English
signals usually will not need noise reduction.
MPEG NR OPERATION
1 Press the MENU button on the remote control to 
display the Main menu.
2 Use the CURSOR ◄	and	►	buttons	to	highlight	ADVANCED. Press the  OK button.
3 Use the CURSOR ▲	and	▼	buttons	to	select	MPEG NR. Press the OK  button.
4 Use the CURSOR ▲	and	▼	buttons	to	select	Off, 
Weak, Medium  or Strong. Press the OK button.
DYNAMIC AI OPERATION
1 Press the MENU button on the remote control to 
display the Main menu.
2 Use the CURSOR ◄	and	►	buttons	to	highlight	ADVANCED. Press the  OK button.
3 Use the CURSOR ▲	and	▼	buttons	to	select	the	Dynamic AI. Press the OK button.
4 Use the CURSOR ▲	and	▼	buttons	to	select	Off, 
W
eak, Medium or Strong. Press the OK button.
NOTE : Please set PICTURE MODE to User then can turn  on this function PAGE 19.
PICTURE (PIX) SHAPE OPERATION
Pix Shape- Divided into three categories. The options 
during the Pix Shape mode change by the detection of 
HD, SD or PC inputs.
HD: Full / WaterGlass / Zoom1 / Zoom2 
SD: Standard / WaterGlass / Zoom1 / Full / Zoom2
PC: Normal / Full / Dot by Dot
1 Press the MENU button on the remote control to 
display the Main menu.
2 Use the CURSOR ◄	and	►	buttons	to	highlight	ADVANCED. Press the 
OK button.
3 Use the CURSOR ▲	and	▼	buttons	to	select	Pix 
Shape. Press the OK button.
4 Use the CURSOR ▲	and	▼	buttons	to	select	Standard, W aterGlass, Zoom1, Full or Zoom2. 
Press the OK button.
NOTE :  The remote controls of HD cable and satellite  boxes also have similar zoom choices. Try having 
the TV setting on FULL first, and adjust via the 
cable/satellite box's remote control.
BACKLIGHT OPERATION
1 Press the MENU button on the remote control to 
display the Main menu.
2 Use the CURSOR ◄	and	►	buttons	to	highlight	ADVANCED. Press the OK button.
3 Use the CURSOR ▲	and	▼	buttons	to	select	Backlight. Press the OK button.
4 Use the CURSOR ◄	and	►	buttons	to	select	the	desired value between 0 to 50.
NOTE:
•	 This item will be grayed out if you turn on the Light 
sensor function. 
•	 Please set Light sensor operation to off then can turn on 
this function.
LIGHT SENSOR OPERATION
Picture brightness will automatically be boosted or reduced 
depending on the room brightness.
1 Press the MENU button on the remote control to 
display the Main menu.
2 Use the CURSOR ◄	and	►	buttons	to	highlight	ADVANCED. Press the 
OK button.
3 Use the CURSOR	▲	and	▼	buttons	to	select	Light 
Sensor. Press the OK  button.
4 Use the CURSOR	▲	and	▼	buttons	to	select	Off 
,Low ,Middle or High . Press the OK button.
NOTE:
•	 The initial setting of Light sensor in the Home mode is 
High.
•	 Change this setting to Middle, Low or Off if a picture is 
too dark in your home.
OSD DISPLAY TIME OPERATION
OSD Display Time
1 Press the MENU button on the remote control to 
display the Main menu.
2 Use the CURSOR ◄	and	►	buttons	to	highlight	ADVANCED. Press the OK button.
3 Use the CURSOR ▲	and	▼	buttons	to	select	the	OSD Display Time option. Press the OK button.
4 Use the CURSOR ◄	and	►	buttons	to	choose	from 20 Seconds, 
30 Seconds, 40 Seconds, 50 
Seconds or 60 Seconds. 
Press the OK button.
NEXT PAGE OPERATION
NEXT PAGE - Jump to next page menu.
1 Press the MENU button on the remote control to 
display the Main menu.
2 Use the CURSOR	◄	and	►	buttons	to	highlight	ADVANCED. Press the  OK button.
3 Use the CURSOR	▲	and	▼	buttons	to	select	the	Next Page.
4 Press the OK button to jump to the next page.
120Hz CONDITION OPERATION
1 Press the MENU button on the remote control to 
display the Main menu.
2 Use the CURSOR	◄	and	►	buttons	to	highlight	ADVANCED. Press the OK button.
3 Use the CURSOR	▲	and	▼	buttons	to	select	the	Next Page. Press the OK  button.
4 Use the CURSOR	▲	and	▼	buttons	to	select	the	120Hz Condition option. 
5 Use the CURSOR	◄	and	►	buttons	to	adjust	the	120Hz Condition setting to On  or Off.   
						

							22
English
NOTES : •	 When you select to PC source or USB mode, the120Hz 
CONDITION default setting is set to Off.
•	 When display happened double shadow or Outer Glow 
,please turn off the 120Hz CONDITION.
RESET ADVANCED OPERATION
Reset Advanced-
 Reset the previous adjustment settings 
under the ADVANCED mode to the factory default value. 
1 Use the CURSOR ◄ and ► buttons to highlight 
ADVANCED. Press the OK button.
2 Use the CURSOR ▲  and ▼ buttons to highlight 
Reset Advanced. Press the OK button.
3 Use the CURSOR ▲  and ▼ buttons to select 
Reset or Cancel. Press the OK button.
NOTE :  Press the MENU button to return to the previous  ADVANCED menu.
PREVIOUS PAGE OPERATION
PREVIOUS PAGE - Return to previous page.
1 Press the MENU button on the remote control to 
display the Main menu.
2 Use the CURSOR ◄ and ► buttons to highlight 
ADVANCED. Press the OK button.
3 Use the CURSOR ▲ and ▼ buttons to select the 
Previous Page.
4 Press the OK button can return to previous page.
SYSTEM
LANGUAGE OPERATION
Language-  Choose from English, Français, and Español for 
the on-screen display of menus and messages. 
1 Press the MENU button on the remote control to 
display the Main menu. 
2 Use the CURSOR ◄ and ► buttons to highlight 
SYSTEM. Press the OK button.
3 Use the CURSOR ▲  and ▼ buttons to highlight 
Language option. Press the OK button.
4 Use the CURSOR ▲  and ▼ buttons to select 
English, Français or Español. Press the OK 
button. A red hook will appear in the squared and 
blank region.
TIME OPERATION
Time Zone -  Choose from six categories in different 
location, U.S.A. of Eastern, Central, Mountain, Pacific, 
Alaska, and Hawaii, for your choice of setting all displayed 
time zone on all ON- Screen Menu. 
1 Press the MENU button on the remote control to 
display the Main menu. 
2 Use the CURSOR ◄ and ► buttons to highlight 
SYSTEM. Press the OK button.
3 Use the CURSOR ▲  and ▼ buttons to highlight 
Time. Press the OK button.
4 Use the CURSOR ▲  and ▼ buttons to select 
Eastern, Central, Mountain, Pacific, Alaska 
or Hawaii. Press the OK button. A red hook will 
appear in the squared and blank region. 
Current Year 
1 Press the MENU button on the remote control to 
display the Main menu. 
2 Use the CURSOR ◄ and ► buttons to highlight 
SYSTEM.
3 Use the CURSOR ▲  and ▼(Down buttons to 
highlight Time. Press the OK button.
4 Use the CURSOR ▲  and ▼ buttons to highlight 
Current Year. 
5 Use the  CURSOR ◄ and ► buttons to select year.
Current Date
1 Press the MENU button on the remote control to 
display the Main menu. 
2 Use the CURSOR ◄ and ► buttons to highlight 
SYSTEM.
3 Use the CURSOR ▲  and ▼ buttons to highlight 
Time. Press the OK button.
4 Use the CURSOR ▲  and ▼ buttons to highlight 
Current Date. 
5 Use the CURSOR ◄ and ► buttons to select 
month number. Press the OK button.
6 Use the CURSOR ◄ and ► buttons to select 
date number. Press the OK button.
Current Time
1 Press the MENU button on the remote control to 
display the Main menu. 
2 Use the CURSOR ◄ and ► buttons to highlight 
SYSTEM.
3 Use the CURSOR ▲  and ▼ buttons to highlight 
Time. Press the OK button.  
						

							23
English
4 Use the CURSOR ▲	and	▼	buttons to highlight 
Current Time. 
5 Use the CURSOR◄	and	►	buttons	to	select	hour.Press the OK  button.
6 Use the CURSOR◄	and	►	buttons	to	select	minutes.Press the OK button.
On T
ime Function- turn on Switch on Time function
1 Press the MENU button on the remote control to 
display the Main menu. 
2 Use the CURSOR ◄	and	►	buttons	to	highlight	SYSTEM.
3 Use the CURSOR ▲	and	▼	buttons to highlight 
Time. Press the OK button.
4 Use the CURSOR ▲	and	▼	buttons to highlight 
On Time Function.
5 Use the  CURSOR◄	and	►	buttons	to	select	On 
or  Off. Press the OK button.
Switch On Time - You can automatic turn on TV at 
your setting time.
1 Press the MENU button on the remote control to 
display the Main menu. 
2 Use the CURSOR ◄	and	►	buttons	to	highlight	SYSTEM.
3 Use the CURSOR ▲	and	▼	buttons to highlight 
Time.Press the OK button.
4 Use the CURSOR ▲	and	▼	buttons to highlight 
Switch On Time. 
5 Use the CURSOR◄	and	►	buttons	to	select	hour.Press the OK  button.
6 Use the CURSOR◄	and	►>	buttons	to	select	minutes. Press the OK button.
POWER SA
VING OPERATION
1 Press the MENU button on the remote control to 
display the Main menu. 
2 Use the CURSOR ◄	and	►	buttons	to	highlight	SYSTEM.
3 Use the CURSOR ▲	and	▼	buttons to highlight 
Power Saving. Press the OK button.
Sleep-  Choose from Off, 30 min, 60 min, 90 min,120 min, 
150 min, and 180 min for your choice of setting the counting 
down of time you desire the HDTV to be turned off by itself. 
The default setting is Off. 
1 Press the MENU button on the remote control to 
display the Main menu. 
2 Use the CURSOR◄	and	►	buttons	to	highlight	SYSTEM. Press the OK  button.
3 Use the CURSOR ▲	and	▼	buttons to highlight 
Power Saving. Press the OK button. 
4 Use the CURSOR ▲	and	▼	buttons to highlight 
Sleep. Press the OK button.
5 Use the CURSOR ▲	and	▼	buttons to select Off, 
30 min,  60 min, 90 min, 120 min,  150 min or  180 
min. Press the OK button. A red hook will appear 
in the squared and blank region.
No Signal Standby-  
Automatic power saving, when no TV 
signal input display on your panel. 
1 Press the MENU button on the remote control to 
display the Main menu. 
2 Use the CURSOR ◄	and	►	buttons	to	highlight	SYSTEM.
3 Use the CURSOR ▲	and	▼	buttons to highlight 
Power Saving. Press the OK button.
4 Use the CURSOR ▲	and	▼	buttons to highlight 
No Signal Standby. Press the OK button.
5 Use the CURSOR ▲	and	▼	buttons to select On 
or Off. Press the OK button.
ANALOG CLOSED-CAPTION OPERATION
Analog CC-  Choose from eight types of captions for Analog 
TV signal for your choice of setting the desired caption type to 
be displayed with Analog TV signal programs on your HDTV. 
1 Press the MENU button on the remote control to 
display the Main menu. 
2 Use the CURSOR ◄	and	►	buttons	to	highlight	SYSTEM. Press the OK  button.
3 Use the CURSOR ▲	and	▼	buttons to highlight 
Analog CC. Press the OK button.
4 Use the CURSOR ▲	and	▼	buttons to select CC1, 
CC2, CC3, CC4, TT1, TT2, TT3 or TT4. Press the 
OK button. A red hook will appear in the squared 
and blank region.
DIGITAL CLOSED-CAPTION OPERATION
Digital CC
-  Choose from six types of captions for Digital TV 
signal for your choice of setting the desired caption type to 
be displayed with Digital TV signal programs on your HDTV. 
1 Press the MENU button on the remote control to 
display the Main menu. 
2 Use the CURSOR ◄	and	►	buttons	to	highlight	SYSTEM. Press the OK  button.
3 Use the CURSOR ▲	and	▼	buttons to highlight 
Digital CC. Press the OK button.
4 Use the CURSOR ▲	and	▼	buttons to select 
CS1, CS2, CS3, CS4, CS5 or CS6. Press the OK 
button. A red hook will appear in the squared and 
blank region.  
						

							24
English
CC STYLE SETTING OPERATION
CC Style Setting- Caption is a textual information 
transmitted along with the picture and sound. 
Turning captioning ON causes the HDTV to open 
these captions (Digital or Analog) and superimpose 
them on the screen (Local broadcasters decide 
which caption signals to transmit). Digital Captions 
can be changed by your choice of the CC Style 
Setting as shown.
There are several Subcatalogs for each nine 
categories under the CC Style Setting for your choice 
of setting the desired caption style superimposed on 
your HDTV screen.
Category Title Subcatalog of the Category Title
CC SettingCC Display / Muted=On / Off
CC PriorityAutomatic / Analog CC / Digital CC
Digital CC PresetDefault / Custom
Font SizeStandard / Large / Small
Font ColorWhite / Red / Green / Blue / Yellow /  Magenta / Cyan / Black
Font StyleStyle1 / Style2 / Style3 / Style4 / Style5 / Style6 / Style7
Edge TypeNone / Raised / Depressed / Outline  / L.shadow / R.shadow
Edge ColorWhite / Red / Green / Blue / Yellow / Magenta / Cyan / Black
Background ColorWhite / Red / Green / Blue / Yellow / Magenta / Cyan / Black
1 Press the MENU button on the remote control to 
display the Main menu.
2 Use the CURSOR ◄	and	►	buttons	to	highlight	SYSTEM. Press the OK  button. 
3 Use the CURSOR ▲	and	▼	buttons to highlight 
CC Style Setting. Press the OK button.
4 Use the CURSOR ▲	and	▼	buttons to select CC 
Setting, CC Priority, Digital CC, Present, Font 
Size, Font Color, Font Style, Edge Type, Edge 
Color or Background Color. Press the OK 
button.
5 Use the CURSOR ◄	and	►	buttons	to	select	the	above
-mentioned Subcatalog of the Category Title 
you want to set. Press the OK button. RESET SYSTEM OPERATION
Reset System-
 Reset the previous adjustment settings 
under the  SYSTEM mode to the factory default value. 
1 Use the CURSOR  ◄	and	►	but tons	to	hig hlight	SYS
TEM . Press the OK button.
2 Use the CURSOR ▲	and	▼	buttons to highlight 
Reset System . Press the OK button.
3 Use the CURSOR ▲	and	▼	buttons to select  Reset 
or  Cancel . Press the OK button.
DEFAULT OPERATION
Default- A function linked to the RESET button on the 
remote control. 
Allows you to reset the previous adjustment settings 
of all ON-Screen Menu Operations to the default 
value.
NOTE:  Be sure you wish to execute this function. 
1 Use the  CURSOR  ◄	and	►	but tons	to	hig hlight	SYS
TEM . Press the OK button.
2 Use the CURSOR ▲	and	▼	buttons to highlight 
Default . Press the OK button.
3 Use the CURSOR ▲	and	▼	buttons to select  Reset 
or  Cancel . Press the OK button.
SYSTEM INFO OPERATION
System Info- Allows your checking the record of the 
Firmware Code version and release Date kept in your 
HDTV memory.
1 Use the  CURSOR  ◄	and	►	but tons	to	hig hlight	SYS
TEM . Press the OK button.
2 Use the CURSOR ▲	and	▼	buttons to highlight 
System Info . Press the OK button.
3 Use the MENU button to return to  SYSTEM menu 
or use the  EXIT button to close the ON-Screen 
menu.  
						

							25
English
USB PHOTO VIEWER
MEDIA BROWSER OPERATION 
1 Press the INPUT button on the remote control 
and use the CURSOR ▲ and ▼ buttons to highlight 
USB. Press the OK button.
2 Use the CURSOR ▲  and ▼ buttons to highlight 
Media Browser. Press the OK button.
3 Use the CURSOR ▲  and ▼ buttons to select JPEG 
file or JPEG folder. Press the OK button.
SINGLE VIEW (Open)
1 Use the CURSOR ▲  and ▼ buttons to select Open. Press the OK button.
2 Use the CURSOR ▲ and ▼ buttons to select JPEG 
file. Press the OK button.
3 Use CURSOR ▲ and ▼ buttons can rotate  he 
image.
NOTE:CURSOR ▲	button	can	rotate	view	clockwise.
CURSOR	▼	button	can	rotate	view	counterclockwise
4 Press OK button can zoom in x2 and press OK 
button again can zoom in x4. Press EXIT button 
can minify the image and press exit again can to 
original size.
Note: CURSOR	◄	►	▲	▼	but tons	can	scr oll	ove r	the	screen only in Zoom mode(x2,x4)
5 Use the EXIT button to exit this function.
MULTI VIEW (Thumbnail)
1 Use the CURSOR ▲  and ▼ buttons to select 
Thumbnail. Press the OK button.
2 Press the OK button then use the CURSOR ◄   
►▲  ▼ buttons to select a JPEG file. Press the OK 
button.
3 If the JPEG file more than 15 files. Use the  CURSOR 
◄ ►▲ ▼ buttons to select next page JPEG file. 
4 Use the EXIT button to exit this function.
SLIDESHOW
1 Use the CURSOR ▲  and ▼ buttons to select 
Slideshow. Press the OK button.  
						

							26
English
2 Use the EXIT button to exit this function.
SETTINGS (for Slideshow function) OPERATION
1 Use the CURSOR ▲	and	▼	buttons	to	highlight	Settings. Press the OK button.
2 Use the CURSOR ▲	and	▼	buttons	to	highlight	Slideshow Interval.
Use the CURSOR ◄	and	► buttons to select 3sec, 
5sec or 10sec.
3 Use the CURSOR ▲	and	▼	buttons	to	highlight	Slideshow Effect.
Use the CURSOR ◄	and	► buttons to select 
Off, Wipe Right, Wipe Down, Comb Side, Comb 
UpDown, Checker, Mosaic, Fade, Blind Left, Blind 
Down, Box In and Box Out.
4 Use the CURSOR ▲	and	▼	buttons	to	highlight	Slideshow Repeat.
Use the CURSOR ◄	and	► buttons to select On or 
Off.
NOTES:  
•	 The operation bar of JPEG viewer (OSD) will disappear 
within three seconds. 
Press the INFO button to display the operation bar again.
•	 Use the 
CURSOR ◄	and	► buttons to view Next or 
Previous picture . 
•	 Use the INFO button to close OSD information  
						

							27
English
PHOTO VIEWER SPECIFICATIONS
Playable mediaUSB memory (Should be a flash memory type with USB mass storage.)
No support for USB HUB.
Format FAT16, FAT32
Maximum number of files 10000
Maximum number of 
folders 1000
File path Up to 260 characters
Directory/File name 8 characters
Image file format JPEG Base Line format (Supported) with English file name.
Progressive/JPEG 2000/Uncompressed (Not supported)
Pixel size 8x8 to 16384x8640
Zoom-in-limit x16
Zoom-out limit 4069x2160 (Width x Height) or less: x 1/16
Larger than 4096x2160 (Width x Height) and 8192x4320 (Width x Height)\
 or less: x 1/32
Larger than 8192x4320 (Width x Height): x1/64
Character code supported 
in file system library
Symbol :  !   -   _   #   $   %   &   ’  @   ^   `
Number:  0 1 2 3 4 5 6 7 8 9
Alphabet: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
                a b c d e f g h i j k l m n o p q r s t u v w x y z
*No operation is guaranteed for use Symbol only as a directory name or f\
ile name.
NOTES:
•	 Connectivity is not guaranteed for all devices.
•	 Gently insert the USB device into the port and do no remove while viewin\
g Media Player.
•	 USB device: USB Mass Storage Class device ( MSC)
•	 Connect the USB device to the TV directly.
•	 Do not use a USB Hub.
•	 You must obtain any required permission from copyright owners to use copy\
right content. SANYO cannot and does 
not grant such permission.Imusam earume doluptaspid quiat que eos et hil\
lignam abo. Ut quiassition reni beaqui ducit, 
similicideri del et la sus siti cum utes que preptatem et doluptatibus d\
em reiumque endit evelent aut volupta turemol uptate 
quossim illaccusdae vendandiorum rero dolorun tectat qui utatem nos rehentur aditiat\
quide sandissit estotas re volles et 
min explita tatestenis ipsam que nobitas ut explic tem nuscipid min nis \
dest as molendebitae volum aperit, quo tores rae 
volorectore eum ditatiore sunt il mil ipiderunt aut aliquaest, ulparchil\
 ipiditi omnissi minvenis sum labore doloribus.
•	 Tas alibeature et volut iliqui ab ipsunt utem que suntur?
•	 Ta vel eos aut vent. Osti consequi ut as qui ut velliquae qui te et elitium exceaquas aut accusapelent qui ventio. Udi 
idendebit omnistia volum consequam qui acid maio inis erem as eicid maio\
re volesequo conest, ne et dellupt atiassim 
exped etustotat mod qui optatur?
•	 Pa doluptibus. Ed que volestio dit et eiuribus alignis et exceris cuptas\
 prerro exerum solorum qui num qui volupid eliquibus 
minis earum voluptae. Liqui volor aut doluptat lis restotat.
•	 Obis dis estem fugia iur arum este dolum volupti quuntorem voluptatia in\
 expeles ecuscipsum harci duciuriorem fugita 
voluptasi sitati doloreh enturib ustiustius si consequi vit, corenim por\
est, sitas reria se doles que enis assequaectem 
sin porro in est pos suntium ut aut aut dis utat ped etus aut aut vent a\
lit verenih itateni dolor molorest pro vel illupta 
adicitiuntem laut lautemo luptati onsequi sciist aut modit alit doluptas\
pici ommodit min cumquam quis unt.
•	 Est que odis diciduciis autas voluptiberum quam volendantis sin consequ \
oditae venihic atempos estrum facesto con 
rempos quisquas eos errovidi beat explici maximoles noneculliant omnis volupta quiaspe rsperro ium rernatibus eum 
dolupta turiaes est aliberu ptatur? Debis maximo is et od ulparcient qua\
sin perrum fugia de vollecepe veror simin consequi 
quo corendiorum, il in cone es autate volupti ratiorerum et maximillorro mollor restota ecust, ipsus elibus aut enim sa 
doluptam que nihilique pariam dolene alis aciis sit, velestis eatquia comnit pres modipsam q\
uistibus quiatempos aut 
pliquisi bero volupta sequi ut este pa sent.
•	 Ota dunt voluptibus modipsandam, ut untiorat odiam doloratas quamusdae n\
imi, seque niae sam estiassum et volum 
que di qui dolorectotat ad qui blab idebisit laboreped modipsam est occu\
m ex eum natqui quat faces evel modit minienis 
simustrunto te omnimin vellaceaque qui odi ipid magni doluptas as quia d\
oluptae. Et quiati consed et ditianimus 
endendamus asi que pe lam il everovitio esciis as sectate enis eaquo ili\
asperum esectatur aut autem at fugitaqui corehent  
						

							28
English
HELPFUL HINTS - Problems / Solutions 
If you are having problems with your HDTV, check this 
trouble shooting chart to find one or more possible 
solutions. Before returning your HDTV, please visit our website 
at http://www.sanyoctv.com or call us toll free at 1-800-
877-5032 We can Help!
Problem:
Check these Conditions: Try these Solutions: Page No.
No picture, sound  
(Digital Picture)
•	Check the antenna / external 
connections.
•	There may be a station trouble, no 
signal broadcast.
•	MUTE function may be turned ON.
•	Adjust antenna.
•	Try a different channel.
•	Execute Channel Scan in the 
CHANNEL menu. (Set Signal Type 
to All)
•	Adjust Volume.
7, 11, 
15 - 16
No Caption•	Check if station is broadcasting a 
Closed - Caption signal.
•	Select another channel.
•	Press the CAPTION button to 
select captioning mode.
9, 23
Cannot display picture 
on a full screen•	Press the  PIX SHAPE  button on the 
remote control to change settings.9, 21
Poor Picture/ Sound  
(watching Analog)
•	Check if the program is in color.
•	Check the antenna / external 
connections.
•	Color or Tint may be misadjusted.
•	There may be a station trouble.
•	MUTE function may be turned ON.
•	Try a different channel.
•	Adjust the antenna.
•	Execute Reset Picture in the 
PICTURE menu.
•	Adjust the Volume and/or Image.
7,9 
19 - 20
“No Signal” message 
appears on screen
•	Check the Audio / Video 
connections.
•	Check the external equipment 
connections.
•	Check the external equipment 
settings.
•	Check the antenna connection.
•	Press the INPUT button on the 
remote control.
7 - 13
Pixilation of Digital 
image•	Press the INFO button and check 
signal strength.•	Turn antenna, install signal booster.
•	Install outdoor Digital antenna.7, 11
Cannot select or scan 
some channels
•	Channel may be removed from 
memory.
•	Check antenna connections.
•	No digital signal being 
broadcasted.
•	Weak Signal.
•	Selec Channel List to add 
channels or start channel scan in 
CHANNEL mode.
•	Turn antenna, install signal booster.7, 11, 
15 - 18
No Cable channels 
above number 13•	Check CHANNEL menu, Signal 
Source item should set to Cable.•	Set Signal Source to Cable, Set 
Signal Type to All and execute 
Channel Scan to search for Cable 
channels in CHANNEL menu.
11, 15
Remote Control will 
not operate TV•	Check batteries.
•	Check if the TV is Plugged in.•	Replace batteries.
•	Aim remote control at front of TV.7, 9
Cabinet makes 
popping sound•	This is a normal condition during 
warm - up and cool down of the 
plastic cabinet parts.
No USB Media 
message appears on 
screen•	Check the external equipment 
connections.
•	Check the external equipment 
settings.
•	Press the INPUT button on the 
remote control.  
						

							29
EnglishMaximum Visible Range
(H)1209.6 x (V)680.4 mm (54.6" class /138.8 diagonal)
Refresh Rate
120 Hz
Picture Resolution
Full HD  1920X1080
Viewing Angle
Horizontal 178° & Vertical: 178° (Panel tentative)
Brightness
450(Typical) cd/m2 (Panel tentative)
Contrast Ratio
5000:1 (Typical) (Panel tentative)
Voltage
120V AC 60Hz
AC Power Consumption (average)
342 Watts
Color System
NTSC3.58
Sound System
M
Channel Coverage
Low band:  54.00 to 144.00MHz   Mid band:   145.00 to 424.00MHz   High b\
and:  425.00 to 861.25MHz
Sound Output
10W+10W
Dimensions
(Including Stand)(W)1328 x (H)926 x (D)378 mm
Net Weight
(Including Stand)
31.3 kg
Operating Environment
Operating Temperature: 5°C to 35°C
Operating Humidity: 0 % to 90 %
Storage Temperature: 0°C to 40°C
Storage Humidity: 0% to 90% (non-condensing)
 ■Specifications are subject to change without notice.
 ■The On-Screen Menu and figures in this manual may differ slightly from the product.
Input terminals
PC HDMI/DVI ANTVideo 1 Video 2/3USB
VGA AUDIO JACK  AV AV Audio YPbPr YPbPr Audio
1 13 1 1 1 2 21
SPECIFICATIONS