Sanyo DP55441 Hdtv Lcd Owners Manual

							10
English
GETTING STARTED-CONNECTIONS
3 Analog Signal Connections - VIDEO1 or VIDEO2 (Shared with Component-Y).
Connect an analog device such as an Analog 
Cable Box, Satellite Receiver or VCR.
Composite connectors are included on your HDTV 
to provide continued compatibility with older analog 
devices such as a VCR. (Cables are not supplied)
1 Connect an AV cable to the VIDEO1 or VIDEO2 
jack on the HDTV and to your analog  AV 
equipment as shown. Match the connector 
colors to jack colors.
2 Press the INPUT button to step through the 
signal inputs to select Video1 or Video2.
   
ANALOG DEVICE
4 Component Signal Connections - VIDEO2 or 
VIDEO3 (YPbPr)
Connect Digital devices such as a HD Cable 
Box, HD Satellite Receiver, DVD Player, and 
Game System.
The Component jacks on this HDTV  will 
accept HDTV, EDTV, and SDTV video signals 
and make a great choice for Component when 
connecting your compatible external devices. 
1 Connect a COMPONENT cable to set Green, 
Blue, and Red video jacks asVIDEO2 or    
VIDEO3(YPbPr) on the HDTV andto your digital  
device as shown. (Cable is not supplied)
2
 Connect an AUDIO cable to the matching 
White and Red audio jacks as shown. (Cable 
is not supplied))
3 Press the INPUT button to select the input 
signal as VIDEO2 or VIDEO3(YPbPr).
NOTES:
•	 The VIDEO2 with Green video jack, White and Red 
audio jacks can be used as Composite connectors 
like VIDEO1 (Shared with Component-Y).
•	 You may follow the VIDEO2 OPERATION to choose 
suitable function (Video or YPbPr) for external 
devices.
 
  
 
 
 
 
 
 
  
 
 
 
 
 
DVD PLAYERSATELLITE  RECEIVER  
						

							11
English
GETTING STARTED-POWER CONNECTION/CHANNEL SEARCH
 
POWER CONNECTION
5 Plug in AC power cord  
(120V AC, 60Hz)
6 Press the POWER 
button, (Follow the  
on-screen instructions).
INITIAL SETUP
7 Use the CURSOR ▲	and	▼	buttons	to highlight 
Store or Home . Press the OK button. TVs will enter 
INITIAL CHANNEL SCAN automatically.
Store : This mode is for the retail display setup.
Home : This mode qualifies for ENERGY STAR.
MoveEnterOK
 
INITIAL CHANNEL SCAN
NOTE : Skip the following process if there is no cable or  antenna being plugged-in to tuner connector.
8 Use the CURSOR ▲	and	▼	buttons	to highlight the 
Channel Scan. Press the OK  button. Choose the 
Scan to start the channel scanning. The scanned 
channels are stored in Channel List and can be 
scanned using the CURSOR ▲ and ▼ buttons.
To 120V AC outlet.  
						

							12
English
ADVANCED DIGITAL SIGNAL 
CONNECTIONS-HDMI TO HDMI
Connect compatible Digital devices such as a HD 
Cable Box, HD Satellite Receiver, DVD Player, and 
Game System.
HDMI-High-Definition Multimedia Interface.
This is a digital AV interface that accepts uncompressed 
video signals  for the best picture quality possible. It 
supports HDCP copy protection and allows transmission 
of copy-protected digital content. The signal can also 
include Dolby® Digital or PCM audio when available.
1
 Connect the HDMI input and your external 
device with HDMI cable. 
NOTE : Press the INPUT button to select the input signal 
as HDMI1,HDMI2 or HDMI3.
DVI TO HDMI
(ONLY HDMI1 IS COM PATIBLE WIT H THI S FUN CTION)
1 Use an adapter (not supplied) to connect a DVI 
device to a HDMI1 input jack.
NOTE  :  HDMI  Audio  setting  is  necessary.  (refer  to  page 
20)
2 Connect the audio out of the device to the PC 
AUDIO INPUT.
 
 
 
 
 
 
 
BACK-SIDE VIEW OF HDTV
SATELLITE   RECEIVER PC
DIGITAL AUDIO
1 Connect the Digital Audio output to a 
multichannel receiver as shown.
NOTE:  NOTE:  Dolby  Digital  audio  signal  is  available 
from  the  Digital   Audio  output  terminal  only  when 
receiving a part of a Digital input on the screen.
 
 
 
 
 
 
 
(Coaxial)
DIGITAL 
AUDIO CABLE 
(Not supplied)
MULTICHANNEL  RECEIVER
BACK-SIDE VIEW OF HDTV
AUDIO OUT JACKS
1 Connect the Audio output to a multichannel 
receiver as shown.
STEREO
AMPLIFIER Cable not 
supplied
BACK-SIDE VIEW OF HDTV
ADVANCED AV CONNECTIONS  
						

							13
EnglishNOTE: Before connecting any cables, disconnect the AC Power Cords of both the HDTV and 
Personal Computer from the AC outlets.
1 Connect a RGB cable from the monitor output on 
your PC to the RGB connector on the HDTV and 
tighten the screws. (Monitor Cable not supplied).
2 Insert one end of a Stereo Mini-Audio cable into the 
PC Audio Out jack and the other end into the HDTV 
PC AUDIO INPUT jack. (Stereo Mini-Audio Cable not 
supplied).
HINT:  Volume  can  be  adjusted  both  from  the  PC  and  the 
HDTV VOLUME + / - buttons.
3 Select Auto Adjustment from the PC Setup Menu.
NOTE: Power on the HDTV and any other 
peripheral equipment before powering on the 
computer.
PC MENU NAVIGATION MAP
PC MONITOR OPERATION
PC PREPARATIONTo avoid a “No Support“ condition, preset your PC’s 
output resolution to a XGA value such as 1024 x 768 
before you disconnect it from your regular monitor.
PC MENU- AUTO ADJUSTMENTS 
OPERATION
1 Use the CURSOR ▲  and ▼ buttons on the 
remote control to highlight the Auto Adjust 
in the PC menu. Press the OK button to start  
automatically adjust function.
PC MENU- MANUAL ADJUSTMENT 
OPERATION
The Clock, Phase, Horizontal Position, and Vertical 
Position are set automatically when Auto Adjustment is 
completely done.
Clock- Adjust the Dot frequency to match the dot 
frequency of your computer.
Phase- Adjust the phase when the picture appears 
flicker or blur.
H-Position- Move the image horizontally.
V-Position- Move the image vertically.
1 Use the  CURSOR  ▲ and  ▼ buttons on the remote 
control to highlight  H-Position, V-Position , Clock  
or  Phase . Press the  OK button.
2 Use the CURSOR ◄	and	►	buttons	to	adjust	the	value of setting. Press the MENU button to return.
3 Press the EXIT button on the remote control to 
exit the current menu.
PC MENU OPERATING TIPSThe Picture settings in the PC input will not affect other 
input settings. 
PC CONNECTIONS  
						

							14
English
SPORTS MODE
By simply pressing the “ SPORTS“ button on the 
remote control, the TV will automatically optimize 
both picture and sound settings for the programs 
shown.
 ■Off
 ■Football − For golf, football programs etc. −Fresh greenness of the lawn −Enfolding cheering voices, ball hitting sounds
 ■Winter Sports −For skiing, ice skating programs etc. −Details kept white, vivid color of costume −Enhanced skiing/skating sounds
 ■Marine Sports −For swimming, diving programs etc. −Sparkling blue of sea, azure sky −Delightful splashing and surf sounds
 ■Indoor Sports −For basketball, boxing programs etc. −Alive reddish flesh −Clear announcements, powerful banging sounds
NOTE : When the "SPORTS" button is pushed, an OSD 
showing the current sports mode will appear on 
the lower left of the screen. Once the channel or 
the input source is changed, the sports mode will 
automatically be set to "Off", and the "Sports Off" 
OSD will appear on the upper right of the screen.
If the channel or input source is changed under the 
"Sports Off" status, the "Sports Off" OSD will not 
appear on the upper right of the screen.
   
						

							15
EnglishMENU NAVIGATION MAP
MAIN MENU SUB-MENU OPTIONS
CHANNEL ADJUSTMENT
SIGNAL SOURCE OPERATION There are two categories: 
●	Air ●	CableAIR(Antenna) Search: It will search for analog and digital 
channels that are broadcasted over-the-air.
Cable  Search
:   It  looks  for  analog  cable  channels  and 
unscrambled (Clear QAM) digital cable channels.
1 Press the MENU button on the remote control to 
display the Main menu. Use the CURSOR ◄	and	►	buttons to highlight 

CHANNEL. Press the OK button.
2 Highlight Air or Cable. Press the OK button.
3 Use the CURSOR ▲  and ▼ buttons to highlight 
All. Press the OK button. (A red hook will appear 
beside the selected item).
4 Use the CURSOR ▲  and ▼ buttons to highlight 
Channel Scan. Press the OK button. Choose the 
Scan to start the channel scanning.
Move EnterReturn ExitOKMENUEXIT
ON-SCREEN MENU OPERATION   
						

							16
English
CHANNEL LIST OPERATION
The Channel List  is a database of active channels you can 
scan through using the  CURSOR ▲  and  ▼ buttons.
Customize it by deleting or adding channels.
1 Press the MENU button on the remote control to 
display the Main menu.
2 Use the CURSOR ◄	and	►	buttons	to	highlight	CHANNEL mode. Press the OK button.
3 Use the CURSOR ▲  and ▼ buttons to highlight 
Channel Scan. Press the OK button. Make the 
channel scan process completely, then press OK 
or Menu to exit.
ADDING CHANNELS TO CHANNEL LIST
1 Use the CURSOR ▲  and ▼ buttons to highlight 
the Channel List. Press the OK button.
2 Use the CURSOR ◄	and	►	buttons	to	change	pages.
3 Use the CURSOR ▲	and	▼buttons	to	select	and	highlight the channel you want to add.
4 Press the VOL+ to add the channel to the 
Channel List. (A white Y will appear in the squared 
region. This means the channel is added to the 
Channel List.)
DELETING CHANNELS FROM THE CHANNEL LIST
1 Use the CURSOR ▲	and	▼	buttons	to	highlight	the Channel List. Press the OK button.
2 Use the CURSOR ◄	and	►	buttons	to	change	pages.
3 Use the CURSOR ▲	and	▼	buttons	to	select	and	highlight the channel you want to delete.
4 Press the VOL+ button to delete the channel from 
the Channel List. (A white Y will disappear in the 
squared region. This means the channel has been 
deleted from the Channel List.)
RENAMING CHANNELS FROM THE CHANNEL LIST
You can rename each channel of the Channel List with 
following operation:
1 Use the CURSOR ▲	and	▼	buttons	to	highlight	the Channel List. Press the OK button.
2 Use the CURSOR ◄	and	►	buttons	to	show	more unshowed channels.
3 Use the CURSOR ▲	and	▼	buttons	to	select	and	highlight the channel you want to rename.
4 Press the INFO button.
5 Use 0 ~ 9 buttons to type the channel renaming with 
each appointed English word, numbers, and symbols 
by continuously pressing. (HINT: Use CURSOR 
◄  
and	► buttons to move forward or backward. Use  1-- 
button to delete.)
6 Press the INFO button to confirm.
Number ButtonCharactersNumber ButtonCharacters
0 0.,?!`-()@/+=
5JKLjkl5
1 1
6MNOmno6
2 ABCabc2
7PQRSpqrs7
3 DEFdef3
8TUVtuv8
4 GHIghi4
9WXYZwxyz9
ON-SCREEN MENU OPERATION (CONTINUED)   
						

							17
EnglishPARENT ADJUSTMENT
This SANYO television is equipped with an electronic V-Chip 
to interpret MPAA (Motion Picture Association of America) 
and TV Parental Guidelines rating codes. When these codes 
are detected, the HDTV will automatically display or block 
the program, depending upon choices you make when 
setting up the PARENT menu.
Use this feature to automatically block programs with content 
you deem as inappropriate for your children to view.
MORE INFORMATION
Additional information about MPAA and V-Chip rating 
can be found at:  
www.mpaa.org and www.v-chip.org, respectively.
PASSWORD SETTING
You will need to set a passowrd when using this TV 
and entering the PARENT menu for the first time. 
Enter this password to access the PARENT menu 
from the second time.
1 Press the MENU button and then use the CURSOR 
◄	and	►	buttons	to	highlight	PARENT menu. Press 
the OK button.
2 Use the  0 - 9 buttons to enter  “NEW PIN “ (the new 
password you want to assign).  Press the  OK button.
3 Use the 0 - 9 buttons to enter “ Confirm“ numbers. 
Press the OK button.
NOTE : Please carefully remember new password. If you  forget the former password, press 1-- button 4 times 
to reset password. 
Change password OPERATION
1 Press the  MENU button and then use the  CURSOR	◄	and	►	but
tons	to	hig hlight	PAR ENT menu. Press the 
OK  button.
2 Enter password. If the password is correct, it will 
automatically return to PARENT menu. If the 
password is wrong, you can enter password again 
or press  MENU button to return to  PARENT menu.
3 Use the CURSOR ▲	and	▼	buttons	to	highlight	Change Password. Press the OK
 button.
4 Use the 0 - 9 buttons to enter the "OLD PIN" (the 
former password), "NEW PIN" (the new password 
you want to assign), and enter "Confirm" numbers 
in turn. Press the OK button.
ON-SCREEN MENU OPERATION (CONTINUED) 
V-Chip OPERATION
This TV follows the restricted channels broad casting 
setting within MPAA and TV Rating option in PARENT 
menu.
1 Press the MENU button and then use the  CURSOR 
◄	and	►  bu
ttons to highlight  PARENT. Press the  OK 
button.
2 Enter your password. If the password is correct, it 
will automatically return to the  PARENT menu. If the 
password is wrong, you can enter the password again 
or press  MENU button to return to the  PARENT menu.
3 Use the CURSOR ▲	and	▼	buttons to highlight 
V-Chip . Press the  OK button.
4 Use the CURSOR ▲	and	▼	buttons to select  On,Off 
or  Reset . Press the  OK button.
Lock- Block the broadcast of the current displayed 
channel directly or current source input.
1 Press the  MENU button and then use the  CURSOR 
◄	and	►  bu
ttons to highlight  PARENT. Press the  OK 
button.
2 Enter your password. If the password is correct, it 
will automatically return to the PARENT menu. If 
the password is wrong, you can enter the password 
again or press MENU button to return to the 
PARENT menu.
3 Use the CURSOR ▲	and	▼	buttons	to	highlight	Lock. Press the OK  button.
4 Select On or Off . Press the OK button.
Note:Turn on V-Chip function,you can operate V-Chip 
Adjust.
V-Chip Adjust OPERATION
STANDARD-  Decides which kind of classified channel in the 
Channel List can be viewed.
You can block portions of the TV rating by choosing one or 
more of the content ratings (D, L, S, V and FV).
By blocking just the L and S content ratings of TV-14, for 
example, TV-14 rated programs with a D and V content 
rating could still be viewed.
1 Press the  MENU button and then use the  CURSOR 
◄	and	►	but tons	to	hig hlight	PAR ENT. Press the  OK 
button.
2 Enter your password. If the password is correct, 
it will automatically return to the PARENT menu. 
If the password is wrong, you can enter the 
password again or press the MENU button to 
return to the PARENT menu.
3 Use the  CURSOR  ▲	and	▼	but tons	to	hig hlight	V-C hip 
Adjust  for TV Rating. Press the  OK button.
4 Use the CURSOR	▲	and	▼buttons	to	sel ect	the	opt
ions you want to adjust and press the  OK button.
(MPAA,Block All,TV-Y,TV-Y7,TV-G,TV-PG,TV-14,and 
TV-MA.) 
5 Use the CURSOR	▲	and	▼buttons	to	sel ect	the	opt
ions you want to adjust and press the  OK button. 
Then the option you selected will be locked.
(A yellow lock will appear in the squared region).  
						

							18
English
MPAA OPERATION
MPAA- Decides which kind of classified movie rating signal 
can be viewed.
1 Press the  MENU button and then use the 
CURSOR	◄	and	►	but tons	to	hig hlight	PAR ENT. 
Press the  OK button.
2 Enter your password. If the password is correct, it 
will automatically return to the PARENT menu. If 
the password is wrong, you can enter the password 
again or press MENU button to return to the 
PARENT menu.
3 Use the  CURSOR  ▲	and	▼	but tons	to	hig hlight	V-C hip 
Adjust . Press the  OK button.
4 Use the  CURSOR  ▲	and	▼	but tons	to	hig hlight	MPA A 
for movie Rating. Press the  OK button.
5 Use the  CURSOR  ▲	and	▼	but tons	to	sel ect	the	set
ting you want to adjust and press the OK button. 
(A yellow lock will appear in the squared region).
CAN ENGLISH OPERATION
1 Press the MENU button and then use the CURSOR ◄	and	► buttons to highlight PARENT. Press the OK button.
2 Enter your password. If the password is correct, it 
will automatically return to PARENT menu. If the 
password is wrong, you can enter password again or 
press the MENU button to return to PARENT menu.
3 Use the CURSOR ▲	and	▼	buttons	to	highlight	Can English. Press the OK button.
4 Use the CURSOR ▲	and	▼	buttons	to	select	the setting you want to adjust and press the OK 
button. (A yellow lock will appear in the squared 
region).
CAN FRENCH OPERATION
1 Press the MENU button and then use the CURSOR 
◄	and	►	buttons	to	highlight	PARENT . Press the 
OK button.
2 Enter your password. If the password is correct, it 
will automatically return to PARENT menu. If the 
password is wrong, you can enter password again 
or press the 
MENU button to return to PARENT 
menu.
3 Use the CURSOR ▲	and	▼	buttons	to	highlight	Can French. Press the OK button.
4 Use the CURSOR ▲	and	▼	buttons	to	select	the	setting you want to adjust and press the OK button. 
(A white mark will appear in the squared region.)
NOTE :  Press the  OK button to make or cancel the selected 
settings. A lock symbol will appear beside the 
selected rating option indicating that it is blocked.
V-Chip Adjust OPERATION
ADVANCED-  For V-chip Regional Rating5(RRT5). An 
advanced V-Chip ratings system for digital channels that are 
received with an antenna.
When the HDTV detects compatible RRT5 data, it is 
downloaded and stored in memory and the menu is modified 
to include advanced adjustment option.
1 Press the  MENU button and then use the  CURSOR 
◄	and	► buttons to highlight PARENT. Press the 
OK button.
2 Enter your password. If the password is correct, it 
will automatically return to PARENT menu. If the 
password is wrong, you can enter password again 
or press the 
MENU button to return to the PARENT 
menu.
3 Use the CURSOR ▲	and	▼	buttons	to	highlight	V-Chip Adjust
. Press the OK button.
4 Use the CURSOR	►	buttonto	highlight	ADVANCED.
5 Use the CURSOR	▲	and	▼	buttons	to	select	the	option you want to adjust. Press the OK button.
(Dim0,Dim1,Dim2 or Dim3) 
6 Use the CURSOR	▲	and	▼	buttons	to	select	the	option you want to adjust. Press the OK button. 
Then the option you selected will be locked. (A
 
yellow lock will appear in the squared region). 
NOTE :  If current program stream is without RRT5 data,  this function will be grayed out. This function is only 
effective for digital channels including RRT5 data.
ON-SCREEN MENU OPERATION (CONTINUED)   
						

							19
English
PICTURE/ AUDIO/ ADVANCED 
ADJUSTMENT
PICTURE
ADJUSTING THE PICTURE LEVELS 
PICTURE MODE OPERATION
1 Press the MENU button on the remote control to 
display the Main menu. 
2 Use the CURSOR ◄	and	►	buttons	to	highlight	PICTURE. Press the OK button.
3 Use the CURSOR ▲	and	▼	buttons	to	select	the	Picture Mode. Press the OK button.
4 Use the CURSOR  ▲	and	▼	but tons	to	sel ect	the	Cin
ema , Standard , Vivid  or User . Press the  OK 
button to add a red hook in the blank space.
BRIGHTNESS/ CONTRAST/ SATURATION/ HUE/ 
SHARPNESS OPERATION
1 Press the MENU button on the remote control to 
display the Main menu. 
2 Use the CURSOR ◄	and	►	buttons	to	highlight	PICTURE. Press the OK  button.
3 Use the CURSOR ▲	and	▼	buttons	to	select	the Brightness, Contrast, Saturation, Hue or 
Sharpness. Press the OK button.
4 Use the CURSOR ◄	and	►	buttons	to	adjust	the	picture setting.
NOTE:
•	 These items will be grayed out if you are not select the 
User mode. 
•	 User mode (Picture Mode) will allow to adjust brightness,
contrast,saturation,hue and sharpness function by user.
COLOR TEMPERATURE OPERATION
1 Press the MENU button to display the Main menu. Press the OK button. 
2 Use the CURSOR ◄	and	►	buttons	to	highlight	PICTURE. Press the OK button.
3 Use the 
CURSOR  ▲	and	▼	but tons	to	hig hlight	Col
or Temperature . Press the OK button.
4 Use the CURSOR  ▲	and	▼	but tons	to	sel ect	War
m , Normal  or Cool . Press the  OK button.
VIDEO2 OPERATION
1 Press the MENU button to display the Main menu. Press the OK button. 
2 Use the CURSOR ◄	and	►	buttons	to	highlight	PICTURE. Press the OK button.
3 Use the CURSOR  ▲  or  ▼  buttons to highlight 
Video2 . Press the  OK button.
4 Use the CURSOR  ▲	and	▼	but tons	to	sel ect	YPb
Pr  or Video . Press the  OK button.
RESET PICTURE OPERATION
Reset Picture-  Make the previous adjustment settings 
under the PICTURE mode recovered from the factory 
default value. 
1 Use the CURSOR ◄	and	►	buttons	to	highlight	PICTURE. Press the OK button.
2 Use the CURSOR ▲	and	▼	buttons	to	highlight	Reset Picture . Press the OK button.
3 Use the CURSOR ▲	and	▼	buttons	to	select	Reset or Cancel . Press the OK button.
NOTE : Press the MENU button to return to the PICTURE mode menu.
AUDIO
SOUND MODE OPERATION
1 Press the MENU button on the remote control to 
display the Main menu.
2 Use the CURSOR ◄	and	►	buttons	to	highlight	AUDIO. Press the OK button.
3 Use the CURSOR  ▲	and	▼	but tons	to	sel ect	Sou nd 
Mode . Press the  OK button.
4 Use the CURSOR ◄	and	►	buttons	to	adjust	the	audio setting.(Off/Rock/Pop/Jazz/Vocal/User).
NOTES:
•	 User mode (Sound Equalizer) will allow to adjust 
frequency response from 100Hz to 10kHz by user.
•	 Use the 
CURSOR
 ▲	and	▼	buttons to select frequency.
•	 Use the to 
CURSOR ◄	and	►	buttons	to	adjust the 
frequency setting.