Sanyo DP32671 Hdtv Lcd Owners Manual

							21
ENGLISH
Clear AllAll channels are deleted from the channel memory.
1Select “Channel”, then press ▶ or ENTER.
2Press ▲ or ▼ to select “Add/Delete”, then press ▶ 
or ENTER .
3Press ▲ or ▼ to select “Clear All”, then press  ▶ or 
ENTER .
Add/DeleteAdding Channel >>
Clear All >> Add/Delete >>
ENTER :Set
:Select
CH
Checking the digital 
signal strength
This TV will allow you to view the digital signal 
meter for digital channels. 
1Select “Channel”, then press ▶ or ENTER .
2Press ▲ or ▼ to select “DTV Signal”.
3Press ▶ or ENTER to check the digital signal 
strength.
The digital signal strength screen will appear.
If necessary, adjust the direction of the antenna to 
obtain the maximum signal strength.
Signal Level0 50 100
DTV SignalCH
NOTE: Signal meter feature is not available for analog 
channels.
After 240 seconds, DTV Signal screen will return to 
normal TV-operation automatically.
•
•
Labeling channels
Channel label appear with the channel number 
display each time you turn on the TV, select a 
channel, or press DISPLAY.
You can choose any four characters to identify a 
channel.
To create channel labels
1Select “Channel”, then press ▶ or ENTER
.
2Press ▲ or ▼ to select “Ch Label”, then press  ▶ 
or ENTER .
The Ch Label menu will appear.
3Press ◀ or ▶ to select a channel you want to 
label, then press  ▼.
Ch Label
Label Clear>>
Ch LabelChannel Number15-1
CH-1
:Adjust
:Select
CH
4Press  ◀ or ▶ repeatedly until the character you 
want appears in the first space.
Label Clear >>
Ch LabelChannel Number 15-1
Ch LabelCH-1
:Adjust:SelectENTER :Set
CH
The characters rotation as follows:
SPACE
-      , () @ / + = -
If the character which you desire appears, press 
ENTER.
Repeat this step to enter the rest of the characters.If you would like a blank space in the label name, 
you must choose the empty space from the list of 
characters.
5Repeat steps 3-4 for other channel. You can 
assign a label to each channel.
6When you finish inputting the label name, press 
EXIT to return to the normal screen. 
To clear a Ch LabelAfter step 3 above, press  ▲ or ▼ to select “Label 
Clear”, then press ▶ or ENTER .
NOTE: The channel labels will be reset after “Automatic 
Search” on page 20.
Labeling video inputs
The Video Label feature allows you to label each 
input source for your TV.
1Select “Setup”, then press ▶ or ENTER .
2Press ▲ or ▼ to select “Video Label”, then press 
▶ or ENTER.
3Press ▲ or ▼ to select an input which you want to 
label.
4Press ◀ or ▶ to select the desired label for that 
input source.
Video LabelVideo1 -
-
:Adjust
:Select
Component -
HDMI1 -
HDMI2 -
PC -
Video2
– / VCR / DVD / STB / Cable / Satellite / Receiver / 
Game / Camcorder / PC / DVI PC / Blu-ray
•
56Q0221A_eng.indd   21 56Q0221A_eng.indd   21
1/8/11   5:31:57 PM
1/8/11   5:31:57 PM 
						

							22
Setting the V-Chip
An age limitation can be set to restrict children from 
viewing or hearing violent scenes or pictures that you 
may choose to exclude. The restriction applies to “TV 
Rating” and “Movie Rating” if this data is transmitted. 
You may set this restriction separately. To use the
V-Chip function, you must register a password.
To register a password
1Select “Lock”, then press ▶ or ENTER.
2Select and enter your password (4 digits) using 
Number buttons (0-9), then press ENTER .
LockNew  Password
* * *_
:Enter Code
[0-9]ENTER :Set
“” appears instead of the number.
3Enter the same password again to confirm, then 
press ENTER
.
The password is now registered. 
NOTE: If you forget the password, contact Customer 
Service at 1-800-877-5032 for assistance. 
Your original remote control will be required.
To avoid forgetting the password, write it down and 
keep in a safe place.
To set the V-Chip
1Select “Lock” menu, then press ▶ or ENTER .
2Use Number buttons (0-9) to enter your 
password, then press ENTER. The Lock menu 
will appear.
3Press ◀ or ▶ to set “V-Chip” to “On”.
4Press ▲ or ▼ to select “V-Chip Set”, then press ▶ 
or ENTER .
The V-Chip Set menu appears.
5Press ▲ or ▼ to select which rating will be used, 
then press ▶ or ENTER . Each rating below will 
appear.
TV Rating
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MATV Rating
ENTER :Set:Select
You can set the rating using age level and genre.
Age:
TV-Y    : All children
TV-Y7    : 7 years old and above
TV-G   : General audience
TV-PG   : Parental guidance
TV-14    : 14 years old and above
TV-MA  : 17 years old and above
When you select TV-Y7, TV-PG, TV-14 or TV-MA,
press DISPLAY to explain the rating.
•
•
Genre:
D   : Dialogue
L   : Language
S   : Sex
V   : Violence
FV   : Fantasy Violence
Movie Rating
G
PG
PG-13
R
NC-17
XMovie Rating
ENTER :Set
:SelectG      : All ages
PG     : Parental guidance
PG-13  : Parental guidance 
less than 13 years oldR      : Under 17 years old parental guidance  
  suggested
NC-17   : 17 years old and above
X      : Adult only
6Press ▲/▼/◀/▶ to select the desired rating, then 
press ENTER .
7Press EXIT to return to the normal screen.V-Chip function is activated now.
To use the TV after the TV is protected.
When a program is received that is blocked by the
V-Chip, press MUTE, then enter your password. 
The protection will be temporarily overridden. If the 
TV is turned off or the channel is changed, the V-Chip 
restriction will be reactivated.
NOTE: The V-Chip function is activated only on programs 
and input sources that include a rating signal.
To change the password
1Select “Lock”, then press ▶ or ENTER .
2Use Number buttons (0-9) to enter your password, 
then press ENTER . The Lock menu will appear.
3Press ▲ or ▼ to select “Change Password”, then 
press ▶ or ENTER .
The Change Password screen will appear.
4Enter a new password using Number buttons 
(0-9), then press ENTER .
5Enter the same password again to confirm, then 
press ENTER.
The password is now registered. 
Downloading the additional V-Chip rating systemAs a supplement to the standard V-Chip rating 
system, your television will be able to download an 
additional rating system, if such a system becomes 
available in the future.
To download the additional V-Chip rating system 
(when available)
1Select “Lock”, then press ▶ or ENTER . 
2Use Number buttons (0-9) to enter your password, 
then press ENTER. The Lock menu will appear.
•
56Q0221A_eng.indd   22 56Q0221A_eng.indd   22 1/8/11   5:31:58 PM
1/8/11   5:31:58 PM 
						

							23
ENGLISH
3Press ◀ or ▶ to set “V-Chip” to “On”.
4Press ▲ or ▼ to select “V-Chip Set (DTV)”, then 
press ▶ or ENTER . 
5If the TV is not storing the additional rating 
system, the TV will begin downloading it, which 
may take some time to be completed.
6Set your preferred content rating limits for the 
additional rating system.
7You also need “Update” procedure to update 
rating information.
NOTE: You can only download the additional V-Chip rating 
system when your TV is receiving a digital signal.
When you download the additional rating system, it 
may take some time for the download to occur.
The V-Chip rating information and system are not 
determined or controlled by the TV.
The standard V-Chip rating system is available 
whether your TV is receiving a digital signal or not, 
and will block both analog and digital programs. To 
set the restriction level using the standard V-Chip 
rating system, select V-Chip Set in step 4.
The downloadable V-Chip rating system is an 
evolving technology, and availability, content, and 
format may vary.
You cannot select this feature if the TV is not 
receiving a digital signal for the current station.
To clear the all V-Chip settings
1Select “Lock”, then press ▶ or ENTER .
2Use Number buttons (0-9) to enter your password, 
then press ENTER . The Lock menu will appear.
3Press ▲ or ▼ to select “V-Chip Clear”, then press 
▶ or ENTER .
The V-Chip Clear screen will appear.
4Use Number buttons (0-9) to enter your 
password, then press ENTER . All of your settings 
return to the factory settings.
Closed Caption
WHAT IS CLOSED CAPTIONING?This television has the capability to decode and 
display Closed Captioned television programs. 
Closed Captioning will display text on the screen 
for hearing impaired viewers or it will translate and 
display text in another language.
Captions: This Closed Caption Mode will display 
text on the screen in English or another language. 
Generally, Closed Captions in English are transmitted 
on C1 and Closed Captions in other languages are 
transmitted on C2.
Text: The Text Closed Caption Mode will usually fill 
1/2 of the screen with a programming schedule or 
other information.
1Select “Setup”, then press ▶ or ENTER .
2Press ▲ or ▼ to select “Closed Caption”, then 
press ▶ or ENTER .
The Closed Caption menu will appear.
•
•
•
•
•
•
3Press 
◀ or ▶ to set “CC Setting” to “On”.
On: Captions will be displayed on the screen.
Off: Captions will not be displayed on the screen.
4Press  ▲ or ▼ to select “Analog Caption” or “Digital 
Caption”.
When you select “Analog Caption”, you can 
choose from C1, C2, C3, C4, T1, T2, T3 and T4.
When you select “Digital Caption”, you can 
choose from CS1, CS2, CS3, CS4, CS5 and CS6. 
5Press  ◀ or ▶ to select the desired Closed Caption mode for both Digital and Analog Caption.
6Press ▲ or ▼ to select “CC Priority”, then press 
◀ or ▶ to select “Digital CC” or “Analog CC”.
NOTE: Depending on the broadcast signal, some 
Analog Captions will function with a Digital 
broadcast signal. This step prevent that two 
kind of captions are overlapping.
•
NOTE: If the program or video you selected is not closed-
captioned, no captions will display on-screen.
If text is not available in your viewing area, a black 
rectangle may appear on-screen. If this happens, 
set the CC Setting to “Off ”.
When selecting Closed Captions, the captioning will 
be delayed approx. 10 seconds.
If no caption signal is received, no captions will appear, 
but the television will remain in the Caption Mode.
Misspellings or unusual characters may 
occasionally appear during Closed Captioning. 
This is normal with Closed Captioning, especially 
with live programs. This is because during live 
programs, captions are also entered live. These 
transmissions do not allow time for editing.
When Captions are being displayed, on-screen 
displays, such as volume and mute may be seen 
but may interfere with Closed Captions.
Some cable systems and copy protection systems 
may interfere with the Closed Captioned signal.
If using an indoor antenna or if TV reception is 
very poor, the Closed Caption Decoder may not 
appear or may appear with strange characters or 
misspelled words. In this case, adjust the antenna 
for better reception or use an outdoor antenna.
Closed Caption menu also can be displayed by 
pressing CCD on the remote control.
CC advanced
When you have selected Custom as the display 
method, you can adjust the various setting listed 
below as follows:
This feature is designed to customize Digital Captions 
only.
1Select “Setup”, then press  ▶ or ENTER.
2Press ▲ or ▼ to select “Closed Caption”, then 
press ▶ or ENTER .
The Closed Caption menu will appear.
3Press  ◀ or ▶ to set “CC Setting” to “On”.
4Press ▲ or ▼ to select “Digital CC Preset”, then 
press ◀ or ▶ to select “Custom”.
•
•
•
•
•
•
•
•
•
56Q0221A_eng.indd   23 56Q0221A_eng.indd   23
1/8/11   5:31:58 PM
1/8/11   5:31:58 PM 
						

							24
5Press ▲ or ▼ to select “CC Advanced”, then 
press ▶ or ENTER .
The CC Advanced menu will appear.
6Press  ▲ or ▼ to select the desired item, then 
press ◀ or ▶ to change the setting.
CC AdvancedTe x t  S i z e A u t o
Text Type Auto
Text Edge Auto
Text Color Auto
Text Opacity Auto
Background Color Auto
Background Opacity Auto
:Adjust
:Select
You can select from among the following items 
and parameters. 
Text Size:  Auto, Small, Standard, Large
Text Type:  Auto, Style1, Style2, Style3, Style4, 
Style5, Style6, Style7
Text Edge:   Auto, None, Raised, Depressed, 
Uniform, Left Shadow, Right 
Shadow
Text Color:  Auto, Black, White, Red, Green, 
Blue, Yellow, Magenta, Cyan
Text Opacity:  Auto, Solid, Transparent, 
Translucent, Flashing
Background 
Color:  Auto, Black, White, Red, Green, 
Blue, Yellow, Magenta, Cyan
Background 
Opacity:  Auto, Solid, Transparent, 
Translucent, Flashing
NOTE: You cannot set both “Text Color” and “Background 
Color” as a same color.
You cannot set both “Text Opacity” and “Background 
Opacity” to “Transparent”.
Setting the picture size
You can change to a variety of picture sizes— 
Natural, Cinema Wide1, Cinema Wide2, Cinema 
Wide3, Full and Native.
Selecting the picture size
1Select “Picture”, then press  ▶ or ENTER.
2Press ▲ or ▼ to select “Picture Size”, then press ▶ or ENTER to display Picture Size menu. Press ▲/▼ or corresponding  Number buttons (0-4) to 
select the desired picture size, as described below.
Picture Size
1.Cinema Wide1
2.Cinema Wide2
[0-4] :Select
0.Natural
4.Full
3.Cinema Wide3
NOTE: Selectable picture sizes may vary depending on the 
input source or broadcast signal.
Picture Size menu also can be displayed by 
pressing PICTURE SIZE  on the remote control.
•
•
NaturalIn some cases, this image will display the size of 
standard 4:3 with a black side bar. •
•
Cinema Wide1 (for 4:3 format programs)To fill the screen, the right and left edges are 
extended, however; the center of the picture remains 
near its former ratio.
The top and bottom edges of the picture may be hidden.
Cinema Wide2 (for letter box programs)The entire picture is uniformly enlarged—it is 
stretched the same amount both wider and taller 
(retains its original proportion).
The top and bottom edges of the picture may be hidden.
Cinema Wide3 (for letter box programs with 
subtitles)
To fill the width of the screen, it is extended 
horizontally. However; it is only slightly extended at the
top and the bottom.
The top and bottom edges of the picture may be hidden.
A B C D E F G - - - - - - - - - - - - - - - - A B C D E F G - - - - - - - - - - - - - - - - - - - - - - - - - - 
Full (for 16:9 source programs)Full will display the picture at the maximum size.
Native (for PC mode only)Detects the resolution of the signal of the image and it 
will be shown on the screen with same amount of pixels.
NOTE:
Some High Definition and/or Digital broadcasts may 
not allow you to change the picture size.
In HDMI or COMPONENT mode with a scanning 
rate of 720p, 1080i or 1080p (HDMI only) only the 
Cinema Wide2 and Full picture size feature are 
available.
In PC mode, only the Natural, Full and Native 
picture size features are available. In PC mode 
(WXGA), only the Full and Native picture size 
features are available.
•
•
•
56Q0221B_eng.indd   24 56Q0221B_eng.indd   24
4/5/11   1:52:12 PM
4/5/11   1:52:12 PM 
						

							25
ENGLISH
3On the screen, “” changes to “Loading” and then 
playback will commence. A menu screen may appear on the TV screen, 
if the disc has a menu feature. In this case, 
press ▲, ▼, ◀, ▶ or ENTER  to operate a menu 
feature.
•
4Press 
STOP  ()
 to end playback.The unit can record where you stop a video, but it 
depends on a disc you are using. Press  PLAY 
() to resume a playback point. The unit can 
store a memory of stopped point of last five discs 
that you have played. When one of these discs 
is next loaded, you can resume playback from 
where you stopped playing last time.
If you press STOP
  () again (“Resume off ” 
appears on the screen) the unit will clear the 
stopped point.
You cannot save a stopped point for some discs. 
If a number of discs played and stored in the unit 
exceeds five, a new memory will overwrite the old 
stored memory.
•
•
•
5Press   (EJECT) .
Remove the disc and then press POWER.
The unit turns off. When you eject the disc, you may hear 
mechanism noise, but it is not malfunction.
•
NOTE: If a non-compatible disc is loaded, “Can’t play disc” 
or “Incompatible disc region number Can’t play 
disc” will appear on the TV screen according to the 
type of loaded disc. In this case, check your disc 
again (see page 11).
Some discs may take a minute or so to start 
playback.
A prohibition message “Depending on the disc, this 
operation may be prohibited” or “This operation 
can’t be performed” may appear at the screen. This 
message means either the feature you tried is not 
available on the disc, or the unit cannot access 
the feature at this time. This does not indicate a 
problem with the unit.
When you set a single-faced disc label downwards 
(i.e. the wrong way up) “Loading” will appear on the 
display and then “Can’t play disc” will be displayed.
Some playback operations of DVDs may be 
intentionally fixed by software producers. Since 
this unit plays DVDs according to the disc content 
recorded, some playback features may not be 
available. Also refer to the instructions supplied with 
the DVDs.
•
•
•
•
•
Preparation
The following pages describe the setup/
operation in DVD mode.
PreparationBefore DVD/CD operation, please make the following 
preparations.
1Insert the AC cord plug into a standard 120V 
60Hz polarized AC outlet. 
If the AC cord plug is plugged in for the first 
time, wait for about 5 seconds before pressing 
POWER.
NOTE: When connecting to other equipment, unplug 
the unit from the AC outlet.
•
•
2Press
 POWER on the unit or on the remote 
control to turn on the unit. The POWER indicator 
will change to green.
Each time you turn the unit ON, the TV/DVD 
starts from the TV mode.
When using an amplifier, switch on the amplifier. •
•
3Press  TV/DVD  to select DVD mode.
The DVD startup screen will appear on the screen.
NOTE: If the unit does not operate properly: 
Static electricity, etc., may affect the player’s 
operation. Disconnect the AC power cord once, 
then connect it again.
About inserting disc: 
If the unit is slanted or moved while inserting disc, 
the disc may get damage.
Status display of disc
Press DISPLAY. The status display of the disc will 
appear on the screen
Display messages may change at every time when 
you press DISPLAY for some discs or files.
To make the status display screen disappear, press 
DISPLAY again.
Playback procedure
1
Press  TV/DVD  to select DVD mode.
2Place the disc in the 
disc slot with the label 
side facing forward. (If 
the disc has a label.) 
Hold the disc without 
touching either of its 
surfaces, align it with 
the guides, and place it 
in position.
•
•
•
56Q0221A_eng.indd   25 56Q0221A_eng.indd   25
1/11/11   3:24:29 PM
1/11/11   3:24:29 PM 
						

							26
Special playback
Fast Forward Playback
Press SEARCH (uu) during normal playback.
Each press of SEARCH ( uu) will increase the speed of 
the search.
•  To resume normal playback, press  PLAY (
)
.
Review Playback
Press SEARCH ( tt) during normal playback.
Each press of SEARCH ( tt) will increase the speed of 
the search.
•  To resume normal playback, press  PLAY (
)
.
Still Playback
Press PAUSE  (
)
 during normal playback to pause 
playback.
•  To resume normal playback, press  PLAY ()
 or 
PAUSE  (
)
.
Frame Advance
Press PAUSE  (
)
 during normal playback.
One frame is advanced each time you press  SEARCH 
( tt ) or SEARCH (
uu).
•  To resume normal playback, press  PLAY ()
.
Slow-motion Playback
Press SLOW (
) or SLOW () during normal 
playback or still playback.
Each press of SLOW will change the speed of the 
slow.
•  To resume normal playback, press  PLAY (
)
.
•  To resume the still playback, press  PAUSE ()
.
Locating a chapter or track
Press SKIP () Forward or  SKIP() Reverse 
during playback to locate a chapter/track that you want to 
watch.
Each time you press the button, a chapter or track is 
skipped.
NOTE:
The TV/DVD is capable of holding a still video image 
or On screen display image on your television screen 
indefinitely. If you leave the still video image or On 
screen display image displayed on your TV for an 
extended period of time, you risk permanent damage 
to your television screen.
Zooming
This TV/DVD will allow you to zoom in on the frame 
image. You can then make selections by switching the 
position of the frame.
1Press ZOOM during playback.
The center part of the image will be zoomed in.
Each press of ZOOM will change the ZOOM 
magnification Zoom 2× and Zoom 4×.
2Press ▲/▼/◀/▶ to view a different part of the 
frame.
You may move the frame from the center position 
UP, DOWN, LEFT or RIGHT.
•
3In the zoom mode press ZOOM repeatedly to 
return to a 1:1 view.
NOTE: You can select the Still Playback or Fast Forward 
(Review) Playback in the zoom mode.
Some discs may not respond to the zoom feature.
Locating desired scene
Use the title, chapter and time recorded on the disc to 
locate the desired point to playback.
1Press JUMP  during playback or stop mode.
2Press ▲ or ▼ to select the “Title Search”, “Chapter 
Search”, “Time Search” or “Track Search”. Then 
press ▶ or ENTER .
3Press Number buttons (0–9) to input the number.
If you input a wrong number, press CANCEL .
Refer to the package supplied with the disc to 
check the numbers.
•
•
4Press ENTER
.
Playback starts.
When you change the title, playback starts from 
Chapter 1 of the selected title.
Some discs may not work in the above 
operation.
•
•
•
A-B Repeat playback
A-B repeat playback allows you to repeat material 
between two selected points.
1Press REPEAT A-B
 during playback.
The start point is selected.
2Press REPEAT A-B  again.
The end point is selected.
Playback starts at the point that you selected. 
Playback stops at the end point, returns to Point A 
automatically, then starts again.
To resume normal playback press  REPEAT A-B 
again.
•
NOTE: In A-B Repeat mode, subtitles near the A or B 
locations may not be displayed.
You may not be able to set A-B Repeat during 
certain scenes of the DVD.
A-B Repeat does not work with an interactive DVD, 
MP3/WMA/JPEG-CD.
•
•
•
•
•
56Q0221A_eng.indd   26 56Q0221A_eng.indd   26
1/11/11   3:24:31 PM
1/11/11   3:24:31 PM 
						

							27
ENGLISH
Marking desired scenes
The TV/DVD stores the points that you want to watch 
again up to 12 points.
You can resume playback from each scene.
Marking the scenes
1Press MARKER during playback.
2Select the blank Marker using  ▲/▼/◀/▶, then 
press ENTER  at the desired scene.
•  Up to 12 scenes can be selected.
•  Repeat this procedure to set the other 11  scenes.
3Press MARKER  to return to the normal screen.
Returning to the scenes
1Press MARKER  during playback or stop mode.
2Press ▲/▼/◀/▶ to select the Marker 1-12.
3Press ENTER.
Playback starts from the marked scene.
To cancel the Marker
Follow the above steps 1~2, then press  CANCEL.
NOTE: Some discs may not work with the marking 
operation.
The marking is cancelled when you eject the disc or 
turn the power off.
Some subtitles recorded around the marker may fail 
to appear.
Changing angles
When playing back a disc recorded with multi-angle 
facility, you can change the view angle.
1Press ANGLE during playback.
The current angle will appear.
Current/Total
Angle 1/2
2Press ANGLE repeatedly until the desired angle is 
selected.
NOTE: In case of JPEG-playback, the JPEG-image is 
rotated 90 degrees to the right.
Depending on the DVD, you may not be able 
to change the angles even if multi-angles are 
recorded on the DVD.
•
•
•
•
•
Changing soundtrack 
language
You can select the language when you play a 
multilingual disc.
1Press AUDIO during playback.
The current soundtrack language will appear.
Current/Total
Audio 1/2 English Dolby Digital 2/0CH
2Press AUDIO repeatedly until the desired 
language is selected.
The on-screen display will disappear after a few 
seconds.
Current/Total
Audio 2/2 French Dolby Digital 2/0CH
NOTE: If the desired language is not heard after pressing 
AUDIO several times, the language is not recorded 
on the disc.
Changing soundtrack language is cancelled after 
“Resume off ” has been selected.
The initial default language or available language 
will be heard if the disc is played back again.
Subtitles
Changing the subtitle language
You can select the language when playing back a disc 
recorded with multilingual subtitles.
1Press SUBTITLE  repeatedly during playback until 
your desired language appears.
The on-screen display will disappear after a few 
seconds.
Current/Total
Subtitle 1/2 English
Turning the subtitles off
Press  SUBTITLE  during playback until “Off” appears.
NOTE:
•  Changing subtitle language is cancelled after  “Resume off ” has been selected.
•  Some functions may not work on some DVDs. You  may not be able to turn subtitles on or off or change 
subtitles.
  While playing the DVD, the subtitle may change  when:
  - you eject or insert the disc.
  - you change the title.
•  In some cases, the subtitle language is not changed  to the selected one immediately.
•
•
•
56Q0221A_eng.indd   27 56Q0221A_eng.indd   27
1/8/11   5:32:01 PM
1/8/11   5:32:01 PM 
						

							28
Using HOME MENU
Playing a disc
1Press SETUP during stop mode. 
HOME MENU will appear.
2Press  ▲/▼/◀/▶
to select “Disc 
Navigator”, then 
press ENTER
.
Audio Settings Video Adjust
Disc Navigator
Play Mode
Initial Settings
HOME MENUDVD
3Press ▲/▼ to select 
desired option, then 
press ENTER.Disc Navigator
Title
Chapter
Some discs may not work Disc Navigator.
Depending on a disc, you can select Title, 
Chapter, or both.
•
•
4Press ▲/▼/◀/▶ or Number Buttons (0–9) to 
select Title, Chapter, Track or Time, then press 
ENTER .
Press  SKIP (
) or SKIP  () to move next/
previous page.
Press  RETURN  to return to previous screen.
•
•
Playing a file
1Press 
SETUP during stop mode.
HOME MENU will appear.
2Press ▲/▼/◀/▶ to select “Disc Navigator”, then 
press ENTER .
3Press ▲/▼ to select 
folder, then press 
ENTER .
Folder1
Folder2
Folder3
Folder4
00:00/ 00:00             0kbps
4Press ▲/▼ to select file, then press 
ENTER.
If you select JPEG file, unit shows the pictures 
one after another automatically.
Press  RETURN  to go to previous step.
NOTE: When music files and JPEG files are recorded 
in one disc, you can play simultaneously. Please 
select the music file then select the JPEG file.•
•
•
Play mode
A-B repeat playback
A-B repeat playback allows you to repeat selection 
between two selected points.
1Press PLAY MODE  
during playback.
Play Mode screen
will appear.A(Start Point)
B(End Point)
Off
A-B Repeat
Repeat
Random
Program
Search ModePlay Mode
2Press 
▲/▼ to select “A-B Repeat”, then press  ▶ or 
ENTER .
3Press ▲/▼ to select “A(Start Point)”, then press 
ENTER . The start point is selected.
4Press ▲/▼ to select “B(End Point)”, then press 
ENTER .
The end point is selected. Playback starts at the 
point that you selected. Playback stops at the end 
point and returns to Point A automatically, then 
starts again.
To resume normal playback
Select “Off” in step 3.
NOTE: Some discs may not work Play mode function.
A-B Repeat playback does not work with MP3/WMA 
CD.
•
•
Repeat playback
1Press PLAY MODE
 during playback.
Play Mode screen will appear.
2Press ▲/▼ to select “Repeat”, then press ▶ or 
ENTER.
3Press ▲/▼ to select desired repeat option, then 
press ENTER .
The unit automatically starts repeat playback after 
finishing the current title or chapter.
To resume normal playback
Select “Repeat Off” in step 3.
Random playback
1Press PLAY MODE  during playback or stop mode.
Play Mode screen will appear.
2Press ▲/▼ to select “Random”, then press ▶ or 
ENTER.
3Press ▲/▼ to select desired random playback 
option, then press ENTER .
The unit automatically starts random playback.
To resume normal playback
Select “Random Off” in step 3.
NOTE:
You cannot play Random for programmed contents 
(Random play is not permitted during Program 
playback).
During Random playback, it may repeat the same 
title, chapter or track.
Random playback does not work with MP3/WMA CD.•
•
•
56Q0221A_eng.indd   28 56Q0221A_eng.indd   28 1/11/11   4:36:30 PM
1/11/11   4:36:30 PM 
						

							29
ENGLISH
Program playback
1Press PLAY MODE during playback or stop mode.
Play Mode screen will appear.
2Press ▲/▼ to select “Program”, then press  or 
ENTER .
3Press ▲/▼ to select 
“Create/Edit”, then 
press ENTER . 
“Create/Edit” display 
differs, depending on 
discs or files.Program Step
01. 01
02.
03.
04.
05.
06.
07.
08. Title 1-38
Title 01
Title 02
Title 03
Title 04
Title 05
Title 06
Title 07
Title 08 Chapter 1-004 
  Chapter 001
  Chapter 002
  Chapter 003
  Chapter 004Program
Current Title:02 Chapter:001
4Press ▲/▼/◀/▶ to select Title, Chapter, Track or 
File, then press ENTER .
When you add a program, find where you 
want to add it (Program Step) and select Title, 
Chapter or Track then press  ENTER. (It will be 
added to the left if File is added.) 
To go to previous step, press  RETURN.
If RETURN  is pressed while programming, the 
content will be deleted.
To delete a program, select Program Step that 
you want to delete and press  CANCEL.
•
•
•
•
5Press 
PLAY ( ) .
To play existing programmed contents, select 
“Playback Start” from Play Mode screen and 
press ENTER .
To resume normal playback, select “Playback 
Stop” in Play Mode screen and press  ENTER. 
Your programmed contents are saved.
To delete all programmed contents, select 
“Program Delete” in Play Mode screen and 
press ENTER .
NOTE:
You can repeat the programmed contents. Select 
“Program Repeat” from “Repeat” in the Play Mode 
screen during Program playback. 
You cannot play Random for programmed 
contents (Random play is not permitted during 
Program playback).
In stop mode, you can also enter Play Mode 
screen by selecting “Play Mode” in HOME MENU.
•
•
•
•
•
•
Locating desired scene
1Press  PLAY MODE  during playback or stop mode.
Play Mode screen will appear.
2Press  ▲/▼ to select “Search Mode”, then press ▶ 
or ENTER .
3Press ▲/▼ to select desired search mode option, 
then press ▶ or ENTER .
Search Mode options differs, depending on 
discs or files.
•
4Input Title, Chapter, Track or Folder number or Time by using 
Number buttons 
(0–9) and press 
ENTER
.0   0   1Title Search
Chapter Search
Time Search Input Chapter
A-B Repeat
Repeat
Random
Program
Search ModePlay Mode
For instance, if you want to enter 1hr 4min 
(64:00), input 6, 4, 0, 0.
• NOTE:
You can locate desired scene in menu screen 
for some DVD video.
In stop mode, you can also enter Play Mode 
screen by selecting “Play Mode” in HOME 
MENU.
•
•
Audio Settings menu
The Audio Settings menu offers features for adjusting 
the way discs sound.
1Press  SETUP during stop mode.
HOME MENU will appear.
2Press ▲/▼/◀/▶ 
to select “Audio 
Settings”, then press 
ENTER .Audio Settings Video Adjust
Disc Navigator
Play Mode
Initial Settings
HOME MENUDVD
3Press ▲/▼/◀/▶ to 
setting the option, 
then press ENTER .Audio SettingsEqualizer
Audio DRC
Dialog Off
Rock
Pop
Live
Dance
Techno
Classic
Soft
4Press 
SETUP to save the setting.
Equalizer
Select the most suitable setting to match a 
category of music that you are listening to.
Audio DRC Adjusts loud sound levels down and quiet 
sound levels up while playing. This is useful, 
for instance, when you watch a film in the late 
night.
Audio DRC only works with Dolby Digital 
Sound.
The effect depends on your AV amplifier and 
speaker volume. Adjust the sound as you wish 
and find the most effective setting.
Dialog
Adjust setting when you cannot hear dialogs very 
well.
NOTE: It may not be very effective for some discs or 
files.
•
•
•
•
56Q0221A_eng.indd   29 56Q0221A_eng.indd   29 1/11/11   4:20:26 PM
1/11/11   4:20:26 PM 
						

							30
Video Adjust menu
From the Video Adjust menu you can adjust various 
settings that affect how the picture is presented.
1Press SETUP during stop mode.
HOME MENU will appear.
2Press ▲/▼/◀/▶ to 
select “Video Adjust”,
then press ENTER .Audio Settings Video Adjust
Disc Navigator
Play Mode
Initial Settings
HOME MENUDVD
3Press ▲/▼/◀/▶ to 
setting the option, 
then press ENTER .Sharpness
Brightness
Contrast
Gamma
Hue
Chroma Level Fine
Standard
Soft
Video Adjust
4Press SETUP to save the setting.
Sharpness
Adjust sharpness of images.
Brightness
Adjust brightness of images.
Contrast
Adjust a ratio of brightness between the brightest part 
and the darkest part.
Gamma
Emphasize dark part of images.
Hue
Adjust a balance between green and red.
Chroma Level
Adjust color density. It is effective with animation or 
something with high color density.
NOTE:
It may not be very effective for some discs or files.
•
Quick guide for DVD menu 
operation
You can change the default settings to customize 
performance to your preference.
Setting procedure
1Press SETUP in stop mode.
HOME MENU will appear.
2Press ▲/▼/◀/▶ to select “Initial Settings”,then press ENTER .
Audio Settings Video Adjust
Disc Navigator
Play Mode
Initial Settings
HOME MENUDVD
3Press ▲/▼/◀/▶ to select the desired option, then 
press ENTER .
4Change the selection using ▲/▼/◀/▶ or ENTER, 
by referring to the corresponding page 31. Repeat steps 3 and 4 to change other option.
•
5To clear HOME MENU screen, press SETUP.
56Q0221A_eng.indd   30 56Q0221A_eng.indd   30 1/8/11   5:32:04 PM
1/8/11   5:32:04 PM