Sanyo DP32671 Hdtv Lcd Owners Manual

							ENGLISH
J56Q0221A
ESPAÑOL
56Q0221A_eng.indd   1
56Q0221A_eng.indd   11/8/11   5:31:34 PM
1/8/11   5:31:34 PM 
						

							2
Your Sanyo HDTV is registered at the time of purchase, please keep sales receipt for
future reference.
For your protection in the event of theft or loss of this product, please fill in the informa-
tion requested below and KEEP IN A SAFE PLACE FOR YOUR OWN PERSONAL RECORDS.
Model No. _________________________              Date of Purchase ____________________
Serial No . _________________________               Purchase Price ______________________Where Purchased _____________ _______
ONE-YEAR LIMITED PARTS AND LABOR WARRANTY
THIS LIMITED PARTS AND LABOR WARRANTY IS VALID ONLY ON SANYO TELEVISIONS PUR-
CHASED AND USED IN THE UNITED STATES OF AMERICA, CANADA, AND PUERTO RICO,
EXCLUDING ALL OTHER U.S. TERRITORIES AND  PROTECTORATES. THIS LIMITED WARRANTY
APPLIES ONLY TO THE ORIGINAL RETAIL PURCHASER, AND DOES NOT APPLY TO PRODUCTS
USED FOR INDUSTRIAL OR COMMERCIAL PURPOSES.
WARRANTY APPLICATION
FOR ONE YEARfrom the date of original retail purchase Sanyo Manufacturing Corporation (SMC)
warrants this TV to be free from manufacturing defects in materials and workmanship under nor-
mal use and conditions for parts and labor.
For the FIRST 90 DAYS from the date of original retail purchase, Sanyo Manufacturing Corporation
will replace any defective TV via exchange at the retailer. To ensure proper warranty application,
keep the original-dated-sales receipt for evidence of purchase. Returnthe defective TV to the
retailer along with the receipt and the included accessories, such as the remote control. The
defective TV will be exchanged for the same model, or a replacement model of equal value, if nec-
essary. Replacement model will be contingent on availability and at the sole discretion of Sanyo
Manufacturing Corporation.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WAR RANTIES OF MER-
CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
OBLIGATIONSFor one yearfrom the date of purchase, Sanyo Manufacturing Corporation warrants this product
to be free from defects in material and workmanship under normal use and conditions. During the
first 90 days
under this warranty for any manufacturing defect or malfunction Sanyo
Manufacturing Corporation will provide a new TV via exchange at the retailer.
HOW TO MAKE A CLAIM UNDER THIS WARRANTYPlease call 1-800-877-5032. Please be prepared to give us the television’s model number and seri-
al number when you call. The model number and serial number are  printed on a label attachedto
the back of the unit. For customer assistance, call toll free 1-800-877-5032.
This warranty expresses specific contractual rights; retail purchasers may have additional statuto-
ry rights which vary from state to state.
(EFFECTIVE: March 1, 2007)
Sanyo Manufacturing Corp.
3333 Sanyo Road, Forrest City, AR 72335
ENGLISH
56Q0221A_eng.indd   2 56Q0221A_eng.indd   2 1/8/11   5:31:36 PM
1/8/11   5:31:36 PM 
						

							3
ENGLISH
TRADEMARKS
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered 
trademarks of HDMI Licensing LLC in the United States and other countries.
“As an Energy Star® Partner, Sanyo Manufacturing Corporation has determined that this 
product meets the EnergyStar® guidelines for energy efficiency.”
This symbol on the nameplate means the product is Listed by Underwriter’s Laboratories Inc.
It is designed and manufactured to meet rigid U.L. safety standards against risk of fire, 
casualty and electrical hazards.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby 
Laboratories.
This item incorporates copy protection technology that is protected by U.S. patents and other intellectual 
property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.
 is a trademark of DVD Format/Logo Licensing Corporation.
56Q0221B_eng.indd   3 56Q0221B_eng.indd   34/5/11   1:52:09 PM
4/5/11   1:52:09 PM 
						

							4
CAUTION:
THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM.
TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE 
READ THIS OWNERS MANUAL CAREFULLY AND RETAIN 
FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE 
MAINTENANCE, CONTACT AN AUTHORIZED SERVICE 
LOCATION-SEE SERVICE PROCEDURE.
USE OF CONTROLS, ADJUSTMENTS OR THE 
PERFORMANCE OF PROCEDURES OTHER THAN THOSE 
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS 
RADIATION EXPOSURE.
TO PREVENT DIRECT EXPOSURE TO THE LASER BEAM, 
DO NOT TRY TO OPEN THE ENCLOSURE. RADIATION MAY 
BE PRESENT WHEN THE ENCLOSURE IS OPENED.  DO 
NOT STARE INTO THE BEAM.
Location of the required Marking
The rating sheet and the safety caution are 
on the rear of the unit.
CERTIFICATION: COMPLIES WITH FDA 
RADIATION PERFORMANCE STANDARDS, 21 
CFR SUBCHAPTER J.
Complies with FDA performance standards 
for laser products except for deviations 
pursuant to Laser Notice No. 50, dated 
June 24, 2007.
The lightning flash with arrowhead 
symbol, within an equilateral triangle 
is intended to alert the user to the 
presence of uninsulated dangerous 
voltage within the products enclosure 
that may be of sufficient magnitude to 
constitute a risk of electric shock.
The exclamation point within an 
equilateral triangle is intended to 
alert the user to the presence of 
important operating and maintenance 
(servicing) instructions in the literature 
accompanying the appliance.
 CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER 
(OR BACK). NO USER-SERVICEABLE 
PARTS INSIDE. REFER SERVICING TO 
QUALIFIED SERVICE PERSONNEL. 
 WARNING:  TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN  OR MOISTURE. 
    TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OPEN FLAMES AWAY  FROM THIS PRODUCT AT TIMES.
 CAUTION:  TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN 
BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
The lamp(s) within this product contain mercury.
Disposal should be in compliance with local, state or federal laws.
WARNING:   This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant 
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates, uses and can radiate radio frequency 
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to 
radio communications.
  However, there is no guarantee that interference will not occur in a particular installation. If this equipment does  cause harmful interference to radio or television reception, which can be determined by turning the equipment 
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  -  Reorient or relocate the receiving antenna.
  -  Increase the separation between the equipment and receiver.
  -  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  -  Consult the dealer or an experienced radio/TV technician for help.
CAUTION:   Changes or modifications not expressly approved by the partly responsible for compliance with the FCC Rules  could void the user’s authority to operate this equipment.
ENGLISH
CLASS 1
LASER PRODUCT
CONTAINS MERCURY LAMPS, DISPOSE 
OF PROPERLYRECYCLING OF SANYO TELEVISIONS:
SANYO television customers should contact 
MRM Recycling at 888-769-0149 or visit their 
website at www.mrmrecycling.com regarding 
SANYO’s waste management plan.
56Q0221B_eng.indd   4 56Q0221B_eng.indd   4 4/5/11   1:52:10 PM
4/5/11   1:52:10 PM 
						

							5
ENGLISH
15)  Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such as vases, should not be placed on the apparatus.
16)  An outside antenna system should not be located in the vicinity of overhead power lines or  other electric light or power circuits, or where it can fall into such power lines or circuits. When 
installing an outside antenna system, extreme care should be taken to keep from touching such 
power lines or circuits, as contact with them might be fatal.
17)  Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric  shock.
18)  Do not push objects through any openings in this unit, as they may touch dangerous voltage  points or short out parts that could result in fire or electric shock. Never spill or spray any type of 
liquid into the unit.
19)  If an outside antenna or cable system is  connected to the unit, be sure the antenna or 
cable system is grounded to provide some 
protection against voltage surges and built-up 
static charges, Section 810 of the National 
Electrical Code, ANSI/NFPA 70, provides 
information with respect to proper grounding of 
the mast and supporting structure, grounding 
of the lead-in wire to an antenna discharge 
unit, size of grounding conductors, location 
of antenna discharge unit, connection to 
grounding electrodes, and requirements for the grounding electrode.
20)  When replacement parts are required, be sure the service technician uses replacement parts  specified by the manufacturer or those that have the same characteristics as the original part.
  Unauthorized substitutions may result in fire, electric shock or other hazards.
21)  Upon completion of any service or repairs to this unit, ask the service technician to perform  safety checks to determine that the unit is in proper operating condition.
22)  Keep your fingers clear of the disc slot as it is closing. It may cause injury.
ANTENNA
DISCHARGE UNIT 
(NEC SECTION 810-20)
ANTENNA 
LEAD IN WIRE
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS POWER SERVICE GROUNDING 
ELECTRODE SYSTEM
(NEC ART 250, PART H)
GROUND
CLAMP
ELECTRIC SERVICE  EQUIPMENT
NEC-NATIONAL 
ELECTRICAL CODE
S2898A
EXAMPLE OF ANTENNA GROUNDING AS PER THE
 NATIONAL ELECTRICAL CODE
56Q0221A_eng.indd   5 56Q0221A_eng.indd   5 1/8/11   5:31:38 PM
1/8/11   5:31:38 PM 
						

							6
IMPORTANT SAFETY INSTRUCTIONS (continued)
23)  When you connect the product to other equipment, turn off the power and unplug all of the equipment  from the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owners 
manual of the other equipment carefully and follow the instructions when making any connections.
24)  Reduce the volume to the minimum level before you turn on the product. Otherwise, sudden high volume  sound may cause hearing or speaker damage.
25)  Do not allow the product to output distorted sound for an extended period of time. It may cause speaker  overheating and fire.
26)  When you use the headphones, keep the volume at a moderate level. If you use the headphones  continuously with high volume sound, it may cause hearing damage.
27)  Do not look into the opening of the disc slot or ventilation opening of the product to see the source of the  laser beam. It may cause eye damage.
28)  Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious  personal injury and product malfunction.
29)  This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the NEC  that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be 
connected to the grounding system of the building, as close to the point of cable entry as practical.
30)  The socket-outlet must be installed near the unit and easily accessible.
CONDENSATION
Moisture will form in the operating section of the player if the player is brought from cool surroundings into a warm 
room or if the temperature of the room rises suddenly. When this happens, players performance will be impaired.
To prevent this, let the player stand in its new surroundings for about an hour before switching it on, or make sure 
that the room temperature rises gradually.
Condensation may also form during the summer if the player is exposed to the breeze from an air conditioner. In 
such cases, change the location of the player.
HOW TO HANDLE THE LCD PANEL Do not press hard or jolt the LCD panel. It may cause the LCD panel glass to break and injury may occur. 
If the LCD panel is broken, make absolutely sure that you do not touch the liquid in the panel. This may cause 
skin inflammation. 
If the liquid gets in your mouth, immediately gargle and consult with your doctor. Also, if the liquid gets in your 
eyes or touches your skin, consult with your doctor after rinsing for at least 15 minutes or longer in clean water. 
•
•
CHILD SAFETY:
It Makes A Difference How and Where You Use Your Flat Panel Display
Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind:
THE ISSUE
The home theater entertainment experience is a growing trend and larger flat panel displays are popular 
purchases. However, flat panel displays are not always supported on the proper stands or installed 
according to the manufacturer’s recommendations.
Flat panel displays that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, 
chests or carts may fall over and cause injury.
THIS MANUFACTURER CARES!
The consumer electronics industry is committed to making home entertainment enjoyable and safe.
TUNE INTO SAFETY
One size does NOT fit all. Follow the manufacturer’s recommendations for the safe installation and use of 
your flat panel display.
Carefully read and understand all enclosed instructions for proper use of this product.
Don’t allow children to climb on or play with furniture and television sets.
Don’t place flat panel displays on furniture that can easily be used as steps, such as a chest of drawers.
Remember that children can become excited while watching a program, especially on a “larger than life” flat 
panel display. Care should be taken to place or install the display where it cannot be pushed, pulled over, or 
knocked down.
Care should be taken to route all cords and cables connected to the flat panel display so that they cannot be 
pulled or grabbed by curious children.
WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS:
Use a mount that has been recommended by the display manufacturer and/or listed by an independent 
laboratory (such as UL, CSA, ETL).
Follow all instructions supplied by the display and wall mount manufacturers.
If you have any doubts about your ability to safely install your flat panel display, contact your retailer about 
professional installation.
Make sure that the wall where you are mounting the display is appropriate to support the weight of the unit/
product and wall mount. If you are unsure, contact a professional installer.
A minimum of two people are required for installation. Flat panel displays can be heavy.
56Q0221A_eng.indd   6 56Q0221A_eng.indd   6
1/8/11   5:31:39 PM
1/8/11   5:31:39 PM 
						

							7
ENGLISH
The unit emits heat when in operation.  Do not place any covers or blankets on the unit, this may cause 
overheating. Do not block ventilation holes, or set up near radiators. Do not place in direct sunshine.  When 
placing on a shelf leave 10 cm (4 inches) free space around the entire unit.
10cm
10cm
Notes when mounting the LCD TV/DVD on a wall
If the unit is to be mounted on the wall, contact the retailer where you purchased the LCD TV/DVD for advice, 
and have the equipment professionally installed. Incomplete or improper installation may cause injury to you, 
and/or damage to the LCD TV/DVD.
IMPORTANT NOTICE
Possible Adverse Effects on LCD Panel: If a fixed (non-moving) pattern remains on the LCD Panel for 
long periods of time, the image can become permanently engrained in the LCD Panel and cause subtle but 
permanent ghost images. This type of damage is NOT COVERED BY YOUR WARRANTY. Never leave your 
LCD Panel on for long periods of time while it is displaying the following formats or images:
Fixed Images, such as stock tickers, video game patterns, TV station logos, and websites.
Special Formats that do not use the entire screen. For example, viewing letterbox style (16:9) media on 
a normal (4:3) display (black bars at top and bottom of screen); or viewing normal style (4:3) media on a 
widescreen (16:9) display (black bars on left and right sides of screen).
The following symptoms are not signs of malfunction but technical limitation. Therefore we disclaim 
any responsibility for these symptoms. LCD Panels are manufactured using an extremely high level of precision technology, however sometimes 
parts of the screen may be missing picture elements or have luminous spots.
  This is not a sign of a malfunction. Do not install the LCD Panel near electronic equipment that produces electromagnetic waves.  Some 
equipment placed too near this unit may cause interference.
Effect on infrared devices – There may be interference while using infrared devices such as infrared cordless 
headphones.•
•
•
•
•
SAFETY PRECAUTIONS
56Q0221A_eng.indd   7 56Q0221A_eng.indd   7 1/8/11   5:31:39 PM
1/8/11   5:31:39 PM 
						

							8
How to attach the stand
NOTE:
•  Unplug the AC cord from the AC INPUT terminal.
•  Before beginning this process, assure that the TV is laid on a clean, safe, and cushioned surface to avoid any damage to the unit.
•  Do not touch or press the TV-screen, glass might break under pressure.
Place the TV on its front onto a table.
Align the stand’s bottom-plate (supplied) as seen here.
It will fi  t in only one direction.
Hold the unit and attach the stand frame (a) slowly and secure the stand frame (a) with the 2-black screws 
(supplied). (M4x35mm), as shown in Figure 1.
Finally secure the bottom-plate (b) with 3-silver screws (supplied) (M4x16mm) as indicated by the arrows in 
Figure 2. Be sure to follow the instructions. Insufficient tightening or incorrect installation of the stand will not support 
your unit correctly, and could result in damage or injury from tip-over.
•
How to remove the stand
When you transport this product, remove the stand and pack fl  at against the back of the unit in the carton. To 
remove the stand, perform these steps in reverse order.
For wall mounting, the base must be removed. To disconnect the base/stand remove the 2-black screws from 
the back.
LCD PANEL SIDE
Figure 1
Figure 2
(a)
(b) (b)
56Q0221A_eng.indd   8 56Q0221A_eng.indd   8
1/8/11   5:31:40 PM
1/8/11   5:31:40 PM 
						

							9
ENGLISH
Features
LCD color TV With DVD/CD playerUnique space saving design combines a 26”/32” LCD color TV and a DVD/CD player.
A DVD disc has much more capacity, but is the same size as an audio CD disc. The Picture/Audio quality of a 
DVD exceeds other software. The picture quality is higher than Super VHS video cassettes. The audio quality 
is higher than an audio CD. The DVD also has special options; audio language selection, subtitle language 
selection, or multi-angle, etc.
The DVD PLAYER can playback both audio CDs and MP3/WMA/JPEG CDs.
Compatible with a wide range of DVD audio outputsDigital Audio Jack (Coaxial)When a component with a built-in Dolby Digital decoder is connected, Dolby Digital sound can produce the 
effect of being in a movie theater or a concert hall.
Surround standard is different from Dolby Digital. This format is already in use in many theaters. By connecting 
this unit to a DTS decoder or an AV amplifier with a built-in DTS decoder, the DTS audio of DVD discs 
recorded in this format can be enjoyed. However, audio will not be output from the analog audio output jacks.
By connecting this unit to an AV amplifier with a built-in MPEG decoder, the MPEG audio of DVD discs 
recorded in this format can be enjoyed.
The Linear PCM sound of a 48 kHz/24 bit through 96 kHz/24 bit exceeds audio CD sound.
Convenience FeaturesDirect selection of your desired scenes using Title/Chapter/Time/Track -  You can playback from the 
desired scene.
Recalling Up to 12 Scenes -  
You can program up to 12 scenes in memory and recall the marked scenes.Frame Advance - The PAUSE  moves one frame at a time.
Slow Motion -  The SLOW moves you back and forth through the program by 4 steps of 1/16-1/2 times.
Repeat Playback -  You can repeat chapter, track, title, sides or material between two selected points.
Program Playback (Audio CD/MP3/WMA/CD) -  You can playback tracks in programmed sequences.
Zoom - You can zoom in the selected subject on the screen during playback.
Note:  Make sure that discs are suitable for the following functions.
Multi-Language - Maximum 32 language subtitles and maximum 8 language soundtracks can be played back 
for movies or programs.
Multi-Angle -  Pictures of Sports or a Live Concert are recorded with many cameras. When you play such a disc, 
you can change the angles during playback.
Parental Control -  You can limit the playback of scenes or sounds of DVD discs that have a rating level 
encoded on the disc.
Video Aspect Ratio -  You can change the aspect ratio of the screen for your monitor. 
TV FeaturesIntegrated Digital Tuner -  You can view digital broadcasts without using a Digital TV Set-Top Box.
Closed Caption Decoder With Full Text Mode -  Displays text captions or full screen text on the screen for 
hearing impaired viewers.
Picture Adjustments Using The Remote Control -  The On-Screen display allows precise remote control 
adjustment of BRIGHTNESS, CONTRAST, COLOR, TINT and SHARPNESS.
Programmable TV Sleep Timer -  Operable from the remote control, the TV can be programmed for up to 120 
minutes to turn off automatically.
On-Screen 3 Language Display - You can select one of 3 languages, English, French or Spanish for on-
screen programming.
V-Chip - The V-Chip function can read the rating of a TV program or movie content if the program is encoded
with this information. V-chip will allow you to set a restriction level. •
•
•
•
56Q0221A_eng.indd   9 56Q0221A_eng.indd   9 1/8/11   5:31:43 PM
1/8/11   5:31:43 PM 
						

							10
Contents
Before using your unit
WARRANTY ..................................................... 2
TRADEMARKS ................................................. 3
IMPORTANT SAFETY INSTRUCTIONS ........... 5 
SAFETY PRECAUTIONS ................................. 7
IMPORTANT NOTICE ....................................... 7
How to attach the stand .................................... 8
How to remove the stand .................................. 8
Features ............................................................ 9
Contents ......................................................... 10
Disc................................................................. 11
Parts and functions ......................................... 13
Remote control ............................................... 14
Power source .................................................. 15
Antenna connections ...................................... 16
Cable TV connections ..................................... 16
TV operation
Starting setup ................................................. 17
TV operation ................................................... 17
Quick guide for menu operation ...................... 18
Convenience functions ................................... 19
Memorizing channels ...................................... 20
Checking the digital signal strength ................ 21
Labeling channels ........................................... 21
Labeling video inputs ...................................... 21
Setting the V-Chip ........................................... 22
Closed Caption ............................................... 23
CC advanced .................................................. 23
Setting the picture size .................................... 24
DVD operation
Preparation ..................................................... 25
Status display of disc ...................................... 25
Playback procedure ........................................ 25
Special playback ............................................. 26
Zooming .......................................................... 26
Locating desired scene ................................... 26
A-B Repeat playback ...................................... 26
Marking desired scenes .................................. 27
Changing angles ............................................. 27
Changing soundtrack language ...................... 27
Subtitles .......................................................... 27
Using HOME MENU ....................................... 28
Play mode ....................................................... 28
Audio Settings menu ....................................... 29
Video Adjust menu .......................................... 30
Quick guide for DVD menu operation .............. 30
Function Setup ................................................ 31 
Parental Control .............................................. 32
Additional information
Language Code List ........................................ 33
Country/Area Code List .................................. 33
Connections to other equipment ..................... 34
Reception disturbances .................................. 38
Problems and troubleshooting ........................ 39
Specifications  ................................................ 41
“The American Academy of Pediatrics discourages 
television viewing for children younger than two 
years of age”
56Q0221A_eng.indd   10 56Q0221A_eng.indd   101/8/11   5:31:43 PM
1/8/11   5:31:43 PM