Sanyo DP32671 Hdtv Lcd Owners Manual

31
ENGLISH
Function Setup
SettingOption
Digital Audio Out settings
Digital Out On Digital audio is output when playing a disc.
Off Digital audio is not output when playing a disc.
Dolby Digital Out Dolby Digital Dolby Digital encoded digital audio is output when playing a  Dolby Digital DVD disc.
Dolby Digital > PCM Dolby Digital audio is converted to PCM audio before being  output.
DTS Out DTS DTS encoded digital audio is output when playing a DTS disc.  (Noise will be output if your amplifier/receiver...

32
Parental Control
Some discs are specified as not suitable for children. 
Such discs can be limited not to playback with the 
unit.
How to into the Parental Control menu
1Press SETUP in stop mode.
HOME MENU will appear.
2Press ▲/▼/◀/▶to select “Initial 
Settings”, then press 
ENTER .Audio Settings Video Adjust
Disc Navigator
Play Mode
Initial Settings
HOME MENUDVD
3Press ▲/▼ to select “Options”, then press ▶ or 
ENTER.
Then press ▶ or ENTER to enter the Parental 
Lock menu.
Set Password
1Press ▲ or ▼...

33
ENGLISH
Language Code List
Language (Language code letter), Language code 
Japanese (ja), 1001
English (en), 0514
French (fr),  0618
German (de), 0405
Italian (it),  0920
Spanish (es), 0519
Chinese (zh), 2608
Dutch (nl),  1412
Portuguese (pt), 1620
Swedish (sv), 1922
Russian (ru), 1821
Korean (ko), 1115
Greek (el),  0512
Afar (aa),  0101
Abkhazian (ab),  0102
Afrikaans (af), 0106
Amharic (am), 0113
Arabic (ar), 0118
Assamese (as),  0119
Aymara (ay),  0125
Azerbaijani (az),  0126
Bashkir (ba), 0201...

34
Y
P
bPr
The exact arrangement you use to interconnect various video and audio components to this unit is dependent 
on the model and features of each component. Check the Owner’s Manual provided with each component for 
the location of video and audio inputs and outputs.
To connect the LCD TV/DVD to a VCR
Connections to other equipment
To connect to a DVD player with Component Video InputYou can enjoy a high quality picture by connecting the unit’s COMPONENT VIDEO OUT jacks of your DVD 
player with...

35
ENGLISH
To connect a HDMI or a DVI device to the unitThe HDMI1/DVI input receives digital audio and uncompressed video from a HDMI device or uncompressed 
digital video from a DVI device.
When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate 
analog audio cords required.
Connections to other equipment (continued)
Side of the unit
HDMI - to - DVI adapter cable 
(HDMI type A connector)
(not supplied)
Audio cord (not supplied)
HDMI cable (type A...

36
Using an AV Amplifier with built-in digital surroundIf you are using an Amplifier with built-in digital surround sound, you can enjoy various audio systems including 
Dolby Digital Surround audio that sounds just like the movie.
Connect an AV amplifier with built-in Dolby Digital decoder, DTS decoder, or MPEG decoder etc. as 
shown below.
Coaxial digital cable (not supplied)
AV Amplifier with built-in digital surround 
decoder as listed above Center Speaker
Coaxial Digital 
Audio Output
To Coaxial...

37
ENGLISH
To connect the TV to a PC (Personal Computer)
NOTE: Before connecting any cables, disconnect 
the AC Power Cords of both the TV and Personal 
Computer from the AC outlets.
1Connect an RGB cable from the monitor output (a)
on your PC to the RGB connector on the TV and 
tighten the screws. (Monitor Cable not supplied.)
NOTE:
If Computer has only DVI Output (b), a DVI to RGB 
converter will be required (converter not included).
2Insert one end of a Stereo Mini-Audio cable into 
the PC Audio Out...

38
GHOSTSGhosts are caused by the television signal following two paths. One is the 
direct path and the other is reflected by tall buildings, hills or other large 
objects. Changing the direction or position of the antenna may improve 
the reception.
SNOWIf the TV is located far from the TV station, in a fringe reception area where 
the signal is weak, small dots may appear in the picture.
If the signal is extremely weak, the installation of a larger external antenna 
may be necessary.
RADIO FREQUENCY...

39
ENGLISH
Problems and troubleshooting
Use the following check list for troubleshooting when you have problems with your TV/DVD. Consult your local 
dealer or service outlet if problems persist.
Be sure all connections are properly made when using with other units.SYMPTOMS POSSIBLE SOLUTIONS PAGE
POWER
TV/DVD does not operate. Make sure the power cord is plugged in.
Power is off, check fuse or circuit breaker.
Unplug unit, then plug it back in.
•
•
•
15
TV BROADCAST RECEPTION
Poor sound or no sound....

40
SYMPTOMSPOSSIBLE SOLUTIONS PAGE
DVD
Playback doesn’t start. No disc is inserted.
The disc may be dirty. Clean up the disc.
The unit cannot play CD-ROMs, etc.
•
•
• 25
11
11
No picture. TV/DVD selector is not set correctly.
• 25
No sound. Check the input selector of the amplifier is set properly.
The unit is in the Special playback mode.
Select the correct Audio Output position on AV amplifier.
•
•
• –
26
35
Picture is distorted during 
CUE or REVIEW. The picture will be distorted occasionally.
• –...