Sanyo Ce42fd90b User Manual

English   - 30 -
• First Time Installation 
(*) For Denmark, Sweden, Norway or Finland.
 
Automatic Channel Scan 
  Automatic channel scan is started by pressing 
OK button while Automatic channel scan item 
is highlighted. 
  The following message appears on the 
screen: 
 
 
  Highlight Yes or No by using “
” or “” buttons 
and press  OK 
 button to confi rm.
If Yes is selected, automatic search starts.
Selecting No cancels automatic search.
After search is completed for digital channels, a 
message...

English   - 31 -
the settings. Selecting “Yes” by pressing  OK 
 
button while the “Yes” is highlighted will delete 
the existing channel table.
Then you will be asked to confi rm for deleting 
all channels and settings: 
 
 
  By selecting Yes and pressing the  OK 
 button, 
the existing channel table will be deleted.
After factory settings are loaded, “First Time 
Installation” menu will be displayed.
The menu which is displayed for language 
selection appears on the screen at fi  rst. By using  
“
” or...

English   - 32 -
  
  • You can play 
music, picture and video fi les 
from a USB memory stick. 
  Note 
: If you plug USB stick while in analogue mode, 
the TV will automatically switch to digital TV mode.
   
Note 
: Some USB compliant devices may not be 
supported.
  Note 
: If the USB stick is not recognized after power 
off/on or First Time Installation, fi rst, plug the USB  
device out and power off/on the TV set. Plug the USB  
device in again. 
  Playing MP3 Files 
  
  Play This 
(OK button) :...

English   - 33 -
Video Playback
Play (Red button) : Starts the video 
playback.
Stop (Blue button) : Stops the video 
playback.
Pause (OK button) : Pause the video 
playback.
Rewind (Cursor Left) : Goes backward.
Forward (Cursor Right) : Goes forward.
Menu (Menu button) : Sets subtitle/Audio.
• You can set subtitles by using OK button before 
starting the playback or by using MENU button 
during the playback.
Note: 
-Selected subtitles may not be displayed correctly in 
some cases. 
-In order to display...

English   - 34 -
contents having low amount of noise. The 
optimization of PIXELLENCE will be much more 
evident while viewing such contents.
Pixellence option will not be available in PIP/
PAP window.  
 
Brightness/Contrast/Colour/Sharpness/
Hue 
  Press “
” or “” button to select the desired 
option. Press “
” or “” button to set the level. 
   
Note 
:  Hue 
 option can only be visible when the TV 
receives an NTSC signal. 
  Colour Temp 
  Press “
” or “” button to select  Colour Temp 
. 
Press “
”...

English   - 35 -
  
  Press “
” or “” button to change the preset. 
In equalizer menu, the preset can be changed 
to  Music 
,  Movie 
,  Speech 
,  Flat 
,  Classic 
 and 
  User 
. 
  Select the desired frequency by pressing “
” or “” button and increase or decrease the 
frequency gain by pressing “
” or “” button. 
  Press the “ M 
” button to return to the previous 
menu. 
   
Note 
: Equalizer menu settings can be changed only 
when the  Equalizer 
  Mode 
 is in  User 
. 
 
Balance 
  This setting...

English   - 36 -
 
 
 
Feature Menu 
  
  Pip-Pap 
  In the  Feature 
 menu, highlight  PIP 
 item by 
pressing “
” or “” buttons. Press “” button 
to enter  PIP 
 submenu: 
 
 
  Using “
” or “” button, you can switch to PIP, 
PAP mode or turn off the feature.
If the TV is switched to PIP or PAP mode, 
Pip-Pap submenu will change accordingly and 
the following settings will appear on the same 
menu screen.   
 
Note that if you switch to PAP mode by using Pip-Pap 
setting, only Source and Swap options...

English   - 37 -
 
Language 
  Press “
” or “” button to select  Language 
. 
Use “
” or “” button to select the  Language 
.  
  Default Zoom 
  While zoom mode is set as  AUTO , the TV will 
set the zoom mode in accordance with the  
signal of the broadcast. If there is no WSS or 
aspect ratio information, the TV will then use this 
setting to adopt. Press “
” or “” button to select 
  Default Zoom 
. You can set  Default Zoom 
 to 
 
Panoramic  ,  16:9 
,  4:3 
 or  14:9 
 by pressing “
” or “”...

English   - 38 -
 
Sound System 
  Press “
” or “” button to select  Sound System.  
Press “
” or “” button to change the sound 
system to BG,DK, I, L or L’. 
  Fine Tune 
  Press “
” or “” button to select Fine Tune. 
Press “
” or “” button to adjust the tuning. 
  Search 
  Press “
” or “” button to select Search. Use  “
” or “” button to start programme searching. 
You can also enter the desired frequency 
using the numeric buttons while Search item 
is highlighted. 
  Store 
  Press “
” or “” button...

English   - 39 -
  
  Country 
  Press “
” or “” button to select your country. 
If you want to exit from A.P.S. function, press 
the  BLUE 
 button.
When you press   OK 
 or  RED 
 button for starting 
automatic tuning, all stored programmes will 
be erased and the TV will search for available 
channels. During the search, the following OSD 
will be displayed: 
 
 
  Whenever you press the  BLUE 
 button, APS  
function stops and  Program Table  appears on 
the screen.
If you wait until the end of  APS,...