Sanyo Ce42fd90b User Manual

English   - 20 -
 
 
 
 
Initial Settings 
 
When the TV set is operated for the fi rst  time, 
the IDTV turns on fi rst.
Because this is the fi rst time the TV is used, 
there are no channels stored in the memory.
When the TV is turned on for the fi rst time, the 
menu for the language selection appears on the 
screen. The message “Welcome please select 
your language!” is displayed in all language 
options sequentially in the 
OSD.
By pressing the “” or “” buttons highlight the 
language you want to set...

English   - 21 -
 
General Operation
 
 
Pressing the “TV/DTV” button at any time 
while watching television programmes will 
switch the TV set between the digital terrestrial 
television broadcasting and its normal analogue 
broadcasting. 
  Information Banner 
 
• Whenever you change channel, using the 
P- / P+ button or the numeric buttons, the TV 
displays the broadcast picture along with an 
information banner at the bottom of the screen 
(available only in DTV mode). This will remain 
on the screen...

English   - 22 -
 
 
• Press  
“0” 
 button to view Guide Search 
menu. Using this feature, you can search the 
programme guide database in accordance 
with the genre 
selected or with name match. 
Info available in the programme guide will be 
searched and results matching your criteria 
will be listed.  
You can select programmes or 
set timers by highlighting a channel and then 
pressing OK button.
 
Note: Searching process can be performed by the 
desired date rate or by the channel basis....

English   - 23 -
  
 
Channel List
 
 
Using the “” or “” button on the remote 
control, make sure that the fi rst item, Channel 
List, is highlighted and press the OK button to 
display the Channel List.
The following operations can be performed in 
this menu:
   
• Navigating the entire list of channels
• Deleting channels
• Renaming channels
• Adding locks to channels
• Setting favourites
• Moving channels 
  Channel List is the place where the channels 
are managed. 
 
 
  Navigating the Entire...

English   - 24 -
  
  Press the  OK 
 button to delete the highlighted 
channel in the channel list. Then the message 
below appears on the screen: 
 
 
  Press “
” or “” button to highlight the desired 
option. If  OK 
 button is pressed while “ Ye s 
” is 
highlighted, the highlighted channel is deleted. 
Selecting “ No 
” cancels the deletion.
   
Renaming Channels 
  To rename a specifi c channel, the channel must 
be highlighted by pressing “
” or “” button. 
Then highlight the  Edit Name 
 item by...

English   - 25 -
  
  How to Add a Channel to a Favourites List
  • By pressing “
” or “” buttons, highlight the 
channel  that you want to add to the favourite 
list.
• By
 pressing  OK  button, the highlighted channel 
is added to 
the Favourite List. 
• 
F icon indicates that a channel is added  to 
Favourite List.
   
Removing a Channel from Favourite List
   
• Highlight the channel that you want to remove 
from the favourite list 
and press OK button to 
remove.You can press OK button again to re-...

English   - 26 -
 
Some Digital Terrestrial channels operate 
on a Pay Per View basis. These require a 
subscription and a hardware decoder.
Obtain the Conditional Access Module (CAM) 
and the viewing card by subscribing to a pay 
channel company, then insert those to the TV 
using the following procedure. 
  • Switch off the TV and unplug from the 
mains.
• Insert the CAM and then the viewing card to the 
slot that is located in the terminal cover at the 
left-hand side of the TV (from front view).
•...

English   - 27 -
If the broadcaster enables any special signal 
concerning the audio, you can set this setting 
as On to receive such signals. 
  Favourite Mode
 
Use this function to enable or disable favourite 
mode. Press 
“” / “” button to set this function 
as on or off.
 
   
Channel List 
  Use “
” or “” buttons to go to Channel List 
option. Use “
” or “”  buttons to toggle Channel 
List Mode. If you select “TV Only”, with the “
” or “”  buttons, you navigate through only TV 
channels. If you...

English   - 28 -
  
  Maturity Lock 
(**) 
  (**)
 If you set Country option as UK in the fi rst 
time installation, Maturity Lock option will not 
be visible.
When set, this option gets the maturity information 
from the broadcast and if this maturity level is 
disabled, does not show video-audio. 
  Menu Lock 
  In menu lock you can set locking for all menus, 
or the Installation Menu to restrict access to 
these menus. If the menu lock is disabled, there 
will be free access to the menu system. Use  “...

English   - 29 -
Standby Search (*)
(*) This setting is visible only when the Country 
option is set to Denmark, Sweden, Norway or 
Finland.
Use “
” or “” button to select Standby Search 
and then press “
” or “” button to set this 
setting as On or Off. If you change Standby 
Search to Off, this function will be unavailable.
To use Standby search please make sure that
you select Standby Search as On.
  Language 
  In this menu the user can adjust the preferred 
language. Language is changed by pressing...