Sangean Dt 110 Am Fm Pocket Reciever Owners Manual

							   on FM band and M6 on AM band.
F. Priority
   To store your favorite stations so that you may
   recall the stations in a more easy way.
   When the desired stations are found by the tu-
   ning methods described above. Press the memo-
   ry button       , then Priority station button      . AP
   will flash in the LCD display and also a suggest-
   ed number of memory position. During P is fla-
   shing, select the desired memory position by pre-
   ssing Tuning Control       or       to the desired me-
   mory position, then press Memory button  
   again. P will stop flashing indicating priority station
   memory being done.
   The radio can allow maximum 3 favorite stations.
G. Memory Tuning (station recall)
   Turn on the radio by pressing On/Off button 
   Select AM or FM band by pressing band select-116 8 3 4 6 1  
						

							12   ed button       then Memory Recall button  
   Select the required memory station by pressing
   Tuning Control      or      , LCD display Mand
   memory digit will flash . When the required sta-
   tion is found, press Memory Recall button      ag-
   ain, LCD M and memory digit will stop flashing.
   For priority stations recall, simply turn on the ra-
   dio by pressing On/Off button        then pressing
   Priority station button        . Select the required
   Priority station by pressing priority station button
   again.
   If there is no memory station or priority station,
   while you press Memory Recall button or Priori-
   ty button , LCD display will show ME (memory
   empty) or PE (priority station empty).
H. MEMORY Delete
   If the memory is full or you like to delete the me-10 7 3 4 7 1 8  
						

							   mory stations .Recall the memory stations by pre-
   ssing Memory Recall buttons        . Press Memo-
   ry button      for more than 2 seconds untill LCD
   display DEL flashing, press Memory button 
   again, the recall memory station is then deleted.
I. Memory Scan
   To scan the memory stations, press Memory re-
   call button for more than 2 seconds until LCD dis-
   play MEMO SCAN appears, the radio will scan
   the memory stations up and stops for a few se-
   conds for you to pick up the required memory sta-
   tions. When the required memory station is found.
   Press Memory Recall button       twice to stop
   Memory Scan.
J. Memory Exchange
   For editing your memory stations, you may ex-
   change the memory stations.136 7 6 7  
						

							   Example : To exchange Memory station 2 with
                         Memory station 4.
   Recall Memory station 2 by pressing Memory
   Recall button        , press Memory button       then
   Tuning Control UP      button to the required Me-
   mory station 4, then press Memory button  
   again Memory station 2 and Memory station 4
   now is exchanged.
K. Mono button
   The radio is designed to receive FM stereo broad-
   casts with earphone connected to the earphone
   jack      For weak FM station , press Mono bu-
   tton to get better reception.
L. Change AM band tuning step
   For Northern American countries (Canada and
   USA) and some South American countries, AM
147 3 6 6 
11  
						

							tuning step is 10 kHz. On other countries is 9
kHz.
To change AM band tuning step, please follow
below steps.
1. change AM band tuning step from 9 kHz to
    10kHz.
    Turn off the power by pressing On/Off button
          , press Tuning Control button Up       conti-
    nuously then turn on the power by pressing
    On/Off button again. Release the buttons the
    AM tuning step will now change to 10 kHz.
2. change AM band tuning step from 10 kHz to
    9 kHz
    Turn off the power by pressing On/Off button
          , press Tuning Control button Down  
    continuously and then turn on the power by
    pressing On/Off button again. Release the bu-
    ttons, the AM tuning step will change to 9 kHz.151 4 1 3  
						

							M. Lock Switch
   To prevent accidential changing of any of the ra-
   dio settings, move the Lock Switch      to up po-
   sition, LCD display       icon will appear. To relea-
   se, simply move the switch to its down position.
   It is important to make sure Lock Switch is in its
   down position when radio is to be operated , as
   radio is completely inoperative until Lock Switch
   is released.
   If the radio is not to be used for any extended pe-
   riod of time battery power savings may be realiz-
   ed by setting Lock Switch to On position
   during storage.
Type : FM stereo (via stereo earphones)
              AM standard (mono) SPECIFICATIONS1614  
						

							Earphone Jack : 3.5 mm mini-plug
                                     32 ohm impedance (stereo)
Output Power : 5 mW(10% THD) via earphone.
External Power : Earphone
                                         AM  30 mA
                                         FM  40 mA
Batteries : 3 Volts , AAA size (UM-4)X 2
Dimension ( WXHXD ) in mm : 95 x 60 x 20
Weight : 90g without batteries.
1. Keep the radio dry. If it does get wet , wipe it im-
    mediately. Liquids may contain chemicals that
    can corrode electronic circuitry. MAINTENANCE17 
						

							2.Use and store your radio only in normal temper-
   ature environments. High temperature can shor-
   ten the life of electronic devices, damage batte-
   ries and melt plastic parts.
3. Handle the radio gently and carefully. Dropping
    it can damage circuit boards and cases and ren-
   der it defective.
4. Keep the radio away from dust and dirty.
5. Wipe the radio with a damp cloth to keep it look-
    ing new. Do not use harsh chemicals, solvents
    or strong detergents.
6. Use only fresh batteries of the recommended si-
    ze and type. Always remove old or weak batteri-
    es as they can leak and destroy electronic com-
    ponents and circuitry.
7. Modifying or tampering with the radio intemal
    components can cause a malfunction and will
    void the products warranty.18