Sangean Dt 110 Am Fm Pocket Reciever Owners Manual

FM STEREO/AM
PLL SYNTHESIZED 
RECEIVERTUNINGMO./ST.BANDDT 110DBB
Vol.
DBBOnOffLock2 3 4 
7 81095 1112
13 
141 2
6  

3LOCATION OF CONTROLS
To insure proper operation, please familiarize your-
self with these instructions before using your new
receiver.
    .  On/Off button
    .  LCD display
    .  Tuning Control Down
    .  Tuning Control Up
    .  Battery Compartment
    .  Memory Button
    .  Memeory Recall button
    .  Priority Station Recall
    .  FM Stereo/Mono button
    .  Band selection button
    .  Earphone Jack
    .  DBB (Deep Bass Booster) On/Off
    .  Volume Control
    .  Lock Switch 1 2 3 4 5 6 7 8...

4FM Stereo indicator
System lock
Low battery indicator
Memory Presets
Band Selected
90 minutes auto shut off
FrequencyAuto Scan /Memory Scan status
Frequency unitST
AUTO  MEMO  SCAN AUTO  MEMO  SCAN
MhzMhz
KhzKhzAMAM
FMFM
M
P M
P
1 2 3 4 
5 6 7 8 9
8 
7 
5 
4 
1 
2 
3 
6 
9DISPLAY ICONS 

5BATTERY INSTALLATION
The battery cover is located on the back of the unit.
Slide the cover in the direction of the arrow to gain
access to the battery compartment      . Insert 2
AAA (UM-4) batteries into the compartment. Make
sure that the batteries are positioned in accordance
with the diagram indicated. Replace cover.
Note:
(1) During radio listening , radio will turn itself off
       when the battery power becomes too low. A low
       battery indicator will appear on the display for
       1.5...

6ANTENNA/EARPHONE USE
VOLUME CONTROL
TUNING THE RADIO Inserting the earphone into the earphone jack      .
The cord connecting the earphone to the receiver
acts as an antenna during FM reception and shou-
ld be extended as much as possible to increase
FM sensitivity.
A built-in Ferrite Bar Antenna is provided for AM
reception and it is only necessary to rotate the radio
for maximum signal strength during AM listening.
Adjust volume control       to adjust the required
listening volume.
Band...

7                                            Phone is inserted into earph-
                                            one jack.
A. APS (auto scan and auto preset)
   This radio equips with APS device to have auto
   scan and auto preset function. Among the many
   conveniences offered by this feature it is especia-
   lly useful for the traveler who can automatically
   find all the local stations in any strange city he
   may travel to with just the push of two buttons.
   Turn on the radio by pressing...

8    on AM band. When APS completes , it will appear
    the first radio station it finds. To recall the stations ,
    please refer to Memory Tuning (station recall )
    described later.
B. 90 minutes auto shut off device
    For saving battery power , this radio is designed
    to auto shut off after 90 minutes operation, LCD
    display shows  
   For continuious listening if necessary, pressing
   ON/Off button     for more than 2 seconds until LCD 
   display        disappears
C. Scan tuning...

91 10 3 4 2 6 1 10 D. Manual Tuning
   Turn on the radio by pressing On/Off button       ,
   select AM or FM band by pressing Band Selec-
   ted button       . Desired station may be selected
   by pressing the Tuning Control       or       interm-
   ittently until the desired station is reached. Or
   pressing and holding the Tuning Control until the
   desired station is reached.
E. Memory Tuning (station preset)
   Turn on the radio by pressing On/Off button 
   Select AM or FM band by pressing Band...

10desired memory position by pressing Tuning Con-
trol       or       to the desired memory position,
then press Memory button      again. M will stop
flashing indicating station memory being done.
Note : No matter you press Memory Button  
              or Memory Recall button       , if the numb-
              er digit is flashing which indicates the fla-
              shing number station has been memoried.
              It will replace previous memory station, if
              you press Memory Button...