Sangean Ats606ap Shortwave Radio Owners Manual

							1.Recall a preset station, push  M  button. On 
   display  M  and preset digit will flash, push C 
   button to cancel the preset.1.Press any of the NUMBERED buttons for a 
  desired station and the radio will instantly tune 
  to it. Display will show frequency and Memory 
  position .If you want to change to another preset 
  station just press any other numbered button for 
  access .For SW/FM preset 01-09,push   P1/P2  
  button first then any of 1-9.CANCELLING PRESET40120m90m75m60m49m41m31m25m21m19m16m13m1 2 3 
4 5 6 
7 8 
0
9
FWM123456789
MC
MWM123456789MWM123456789 
						

							If you want to exchange preset 2 to preset 7 for editing the memory.
  1.Recall preset 2.
  
2.Push  M  and display  M  and preset 2 will 
     flash.EXCHANGE THE PRESET 41FWM123456789
FWM123456789
2 
M  
						

							3.Push 7 then preset 2 and preset 7 have been exchanged.42FWM123456789
7  
						

							1.Push any of FM/LW/MW band buttons for more 
   than 2 seconds. The radio will start with a beep 
   tone and display ATS will flash indicating the 
   radio is in ATS mode.
2.The radio will then scan from the lowest fre-
   quency of the Selected band and automatically 
   preset the stations based on station signal 
   strength in order from Memory 1-9.    ATS (AUTO TUNING SYSTEM )This radio provides an excellent and easy to use feature called ATS (Auto Tuning System) which is available 
on FM, LW and MW bands.43FWM1
FWMATSPress more than 2 second 
						

							3.After the whole scanning is completed, a beep 
   tone will be heard. Display will show M [1] and 
   the frequency which is the strongest signal in 
   your area will be heard.
4.If no stations are found, display will show ---- 
   for   2    seconds    and   return   to   last  tuning 
   frequency.  44FWM123456789
FW9 
						

							1.Maximum presets on MW and LW are 9 and 18 
   on FM, and if the auto preset stations are more 
   than 9 for MW/LW bands,18 for FM band,the 
   microporcessor will pick up only 9 stations for 
   MW/LW bands and 18 stations for FM band into 
   2 memory pages (P1/P2) based on signal 
   strength.2.If the auto presets are less than 9, display will    show actual auto presets stations found. For
   example, if only 5 stations are preset , display will
   show [1] 2 3 4 5, when the scanning is 
   completed.3.SW band has no ATS function.
4.When ATS starts to function, it will clear all the 
   original presets.
5.When ATS starts to function, if can be terminated 
   by pushing  POWER/SLEEP  button. During 
   ATS function, all the other functional buttons will 
   not work except light,  POWER/SLEEP  and 
   lock button.Note:45LWM12345 
						

							To have best reception, while is necesary, press fine 
tuning button FINE, LCD will appear FINE indicating 
now is under Fine tuning status. The tuning step 
now will become 1 kHz/step on AM(MW/LW/SW) 
band and 50 kHz/step on FM band while pressing 
tuning []or[V] button.FINE TUNING46SWM123456FINE 
						

							With this radio you can fall asleep to your favorite station by pressing the  POWER/SLEEP  for more 
than 2 seconds or wake you up to the morning news or an alarm buzzer. This radio provides two alarm times that you can set for two different wake up times at the same time.
SETTING THE ALARM (STANDBY)
The alarm can be set
1.While radio power is off.CLOCK RADIO OPERATION47POWER/
   SLEEPAuto tuning systemATSLWMWSWATSATSMETER
-STANDBY-TIMER 
						

							ATSLWMWSWATSATSMETER120m90m75m60m49m41m1 2 3 
4 5 6 ENTER1.When the display is in the time mode, press   
          -SEANDBY  button, display        -STANDBY  
    will flash and show last alarm time (0:00 for the 
    first time).2.If power is on, push  DISPLAY  button to time 
   mode.SETTING ALARM (STANDBY) BY RADIO48ATSLWMWSWATSATSMETER
-STANDBY-TIMER
-STANDBY- 
						

							1.Press the numbered buttons to activate alarm-
   on time. Using 24 hour time, an example will be, 
   if you set the alarm on time at 1:30PM, press the
   button [1] [3] [3] [0] and  ENTER  button. 
   Display will show 13:30 and  STANDBY  will 
   stop flashing indicating alarmed by radio has
   been set at 1:30 PM.
If the wrong number was keyed-in, to delete by
 pressing  C  button. each number for every push 
on the  C  button.
If the time you key in does not exist like 25:30, 
display will show  E  for about 2 seconds and back 
to original time.49-STANDBY-120m90m75m60m49m41m31m25m21m19m16m13m
1 2 3 
4 5 6 
7 8 
0C
911mM
FREQ
ENTER
TIME  SET
-STANDBY-