Samsung X105 User Guide

							Phonebook
37
4. Select the required number if the entry has more than one 
number, by pressing the   or   key and press the 
Select 
soft key.
5. Once you have assigned a number to the selected key, four 
options are available:
 ●Change: allows you to assign a different number to the 
key.
 ●Delete: allows you to clear the setting so that no number 
is assigned to the key.
 ●Delete All: allows you to clear the settings for all keys so 
that no numbers are assigned to any of the keys.
 ●Number: allows you to view the number assigned to the 
key.
6. When you have finished, press the
  or  key.
Speed-Dialing from the Phonebook
To speed-dial the numbers assigned to keys 2 to 9, press and 
hold down the appropriate key.
Note:  Memory location 1 is reserved for your Voice Mail server number 
and cannot be changed. 
Deleting All Phonebook Entries
You can delete all of the entries in the selected memory or both 
memories.
1. When the idle screen displays, press the 
Ph.Book soft key.
2. Scroll to 
Delete All by pressing the Up or Down key and 
press the 
Select soft key. 
						

							Phonebook                                                                                      
 38
3. To place a check mark on the memory you want to empty, 
ALL, SIM or Phone, press the Mark soft key.
You can remove the check mark by pressing the 
Unmark 
soft key.
4. When you are finished marking, press the 
Delete soft key to 
delete the entries in the selected memory.
5. Enter the phone password and press the 
OK soft key.
Note: The password is preset to “00000000’ at the factory.
6. When the confirming message appears, press the Yes soft 
key.
7. When you finish deleting, press the
  or the   key.
Checking Memory Status
You can check how many names and numbers are stored in the 
phonebook (card and phone memories) or how many free 
locations remain. 
1. When the idle screen is displayed, select the 
Ph.Book soft 
key to scroll to Memory Status option pressing the 7 or  
key and press the 
Select soft key.
2. When the idle screen is displayed, select the 
3. Press the   or   keys to view the number of existing and 
remaining entries in the card and phone memories. 
						

							Entering Text
39
Entering Text
When using your phone, you will often need to enter text. For 
example, when storing a name in the phonebook, creating your 
personal greeting or scheduling events in your calendar. You 
can enter alphanumeric characters by using your phone’s 
keypad.
You are provided with the following text input modes.
 ●T9 mode: This mode allows you to enter words with only 
one keystroke per letter. Each key on the keypad has more 
than one letter – when you press the 
5 key once, J, K or L 
may be displayed. The T9 mode automatically compares 
your keystrokes with an internal linguistic dictionary to 
determine the correct word, thus requiring far fewer 
keystrokes than the traditional upper/lower-case character 
modes.
 ●Upper/lower-case character modes: These modes 
allow you to enter letters by pressing the key 
labeledlabeled with the required letter once, twice, three or 
four times until the letter is displayed.
 ●Number mode: This mode allows you to enter numbers.
 ●Symbol mode:  This mode allows you to enter symbols, 
such as punction marks.
Changing the Text Input Mode
When you are in a field that allows characters to be entered, 
you will notice the text input mode indicator in the display.
To select the...
Then press the  soft key until...
T9 mode  displays. See page 40.
Alphabet mode
abc displays. See page 41.
Symbol mode The symbol list displays. See page 42.
Number mode
1 is displayed. See page 42. 
						

							Entering Text                                                                                      
 40
Using the T9 Mode
The T9 predictive text input mode allows you to key in any 
character using single keystrokes. This text input mode is based 
on a built-in dictionary.
1. When you are in the T9 predictive text input mode, start 
entering a word by pressing keys 
2 to 9. Press each key only 
once for one letter. 
Example:to enter HELLO in the T9 mode, 
press 
4, 3, 5, 5 and 6.
The word that you are typing appears in the display. It may 
change with each key that you press.
2. Enter the whole word before editing or deleting the 
keystrokes.
3. If the word is correct, start entering the next word. 
4. Otherwise, press the 
0,   or   key repeatedly to display 
alternate word choices for the keys that you have pressed. 
Example:both OF and ME have the sequence 
6 and 3. The 
phone displays the most commonly used choice first.
5. Complete each word with a space by pressing the 
# key.
 ●To type words not found in the T9 mode, change the text 
input mode to the upper/lower-case character input mode. 
 ●To enter full stops, hyphens or apostrophes, press the 1 
key. The T9 mode applies grammar rules to ensure that the 
correct punctuation is used. 
 ●To change the case in the T9 mode, use the * key.  ●You can move the cursor by using the   and   keys. To 
delete letters, press the
  key. Press and hold down 
the
  key to clear the display. 
						

							Entering Text
41
Using the Upper/Lower-Case Character Mode
Use the 1 to 0 keys to enter your text. 
1. Press the key labeled with the required letter:
 ●Once for the first letter ●Twice for the second letter, and so on
2. Select the other letters in the same way.
Note: The cursor moves to the right when you press a different key. 
When entering the same letter twice or a different letter on the same 
key, just wait for a few seconds for the cursor to move right 
automatically, and then select the next letter.
Refer to the table below for more information about the 
characters available.
 ●To insert a space, press the # key.  ●You can move the cursor by using the   and   keys. To 
delete letters, press the
  key. Press and hold down 
the
  key to clear the display. 
Characters in the Order Displayed
Key
Space
Upper Case Upper Case
Lower Case 
						

							Entering Text                                                                                      
 42
Using the Symbol Mode
The symbol mode enables you to insert symbols in a text 
message. 
Use the navigation keys to scroll to the desired symbol and then 
press 
OK soft key to insert the highlighted symbol into your 
message. 
Using the Number Mode
The Number mode enables you to enter numbers in a text 
message (a telephone number for example). Press the keys 
corresponding to the required digits before manually switching 
back to the appropriate text input mode. 
						

							In-Call Options
43
In-Call Options
Your phone provides a number of control functions that you can 
use during a call.
Putting a Call on Hold
You can place the current call on hold whenever you want. You 
can make another call while you have a call in progress if this 
service is supported by the network. Of these two calls, one is 
active and the other is on hold and you can switch between the 
calls.
To place a call on hold, simply press the 
Hold soft key. You can 
reactivate the call whenever you want, by pressing the Unhold 
soft key.
To make a call while you have a call in progress, proceed as 
follows.
1. Key in the phone number that you wish to dial or look it up 
in the phonebook.
2. Press the   key to dial the second call.
3. The first call is automatically put on hold.
Or alternatively, proceed as follows.
1. Put the current call on hold by pressing the 
Hold soft key.
2. Make the second call in the normal way.
To swap between the two calls, simply press the 
Swap soft key.
The current call is placed on hold and the call on hold is 
reactivated so that you can continue conversing with the other 
party.
When you have finished, end each call normally by pressing the 
 key. 
						

							In-Call Options                
44
Switching the Microphone Off (Mute)
You can temporarily switch your phone’s microphone off, so that 
the other party cannot hear you.
Example: You wish to say something to another person in the 
room but do not want the other party to hear you.
To switch the microphone off temporarily, proceed as follows.
1. Press the 
Options soft key.
2. If necessary, press the   key to highlight the 
Mute option.
3. Press the 
OK soft key. 
The other party can no longer hear you.
To switch the microphone back on, proceed as follows.
1. Press the 
Options soft key.
2. If necessary, press the   key to highlight the 
Unmute 
option.
3. Press the 
OK soft key. 
The other party can hear you again.
Muting/Sending DTMF
These options allow you to turn the key tones off or on. If the Mute keys option is selected, your phone does not transmit the 
key tones. It allows you to press keys without hearing annoying 
key tones during a call.
Note: To communicate with answering machines or computerized 
telephony systems, the Send keys option must be selected. 
						

							In-Call Options
45
Searching for a Number in the Phonebook
You can search for a number in the phonebook during a call.
1. Press the 
Options soft key.
2. Press the   key to highlight the 
Phonebook option.
3. Press the 
OK soft key.
The phonebook entries are listed.
4. Enter the name that you wish to find.
If you enter the start of the name, the phonebook entries 
are listed, starting with the first entry matching your input. 
The entry is also highlighted.
5. To view the highlighted entry, press the 
Options soft key.
For a more detailed description of the Phonebook feature, refer 
to page 30.
Answering a Second Call
You can answer an incoming call while you have a call in 
progress, if this service is supported by the network and you 
have set the 
Call Waiting menu option (Menu 7.2) to 
Activate (see page 99). You will be notified of an incoming call 
by a call waiting tone.
To answer a call while you have a call in progress, proceed as 
follows.
1. Press the   key to answer the incoming call. The first call 
is automatically put on hold.
2. To switch between the two calls, press the 
Swap soft key.
To end a held call, press the 
Options soft key and select the End Held Call option.
3. To end the current call, press the   key. 
						

							In-Call Options                
46
Making a Multiparty Call
A multiparty call is a network service that allows up to six 
people to take part simultaneously in a multiparty or conference 
call. For more information, contact your service provider.
Setting up the Multiparty Call
1. Call the first participant in the normal way.
2. Call the second participant in the normal way. The first call is 
automatically put on hold.
3. To join the first participant to the multiparty call, press the 
Options soft key and select the Join option.
4. To add a new person to the multiparty call, call the person in 
the normal way, then press the 
Options soft key and select 
the Join option.
You can add incoming callers by answering the call and pressing 
Options, followed by Join. Repeat as required.
Having a Private Conversation With One 
Participant
1. Press the Options soft key and choose the Select one 
option. 
The list of call participants appears.
2. Highlight the required person, by pressing the  or   key, 
followed by the 
Select soft key or the   key.
3. Select the 
Private option.
Now you can talk privately with that person. The other 
participants can continue to converse with each other.
4. To return to the multiparty call, press the 
Options soft key 
and select 
Join.
All the multiparty call participants can now hear each other.