Samsung X105 User Guide

Phonebook
37
4. Select the required number if the entry has more than one 
number, by pressing the   or   key and press the 
Select 
soft key.
5. Once you have assigned a number to the selected key, four 
options are available:
 ●Change: allows you to assign a different number to the 
key.
 ●Delete: allows you to clear the setting so that no number 
is assigned to the key.
 ●Delete All: allows you to clear the settings for all keys so 
that no numbers are assigned to any of the keys.
 ●Number: allows you...

Phonebook                                                                                      
 38
3. To place a check mark on the memory you want to empty, 
ALL, SIM or Phone, press the Mark soft key.
You can remove the check mark by pressing the 
Unmark 
soft key.
4. When you are finished marking, press the 
Delete soft key to 
delete the entries in the selected memory.
5. Enter the phone password and press the 
OK soft key.
Note: The password is preset to “00000000’ at the factory.
6. When the...

Entering Text
39
Entering Text
When using your phone, you will often need to enter text. For 
example, when storing a name in the phonebook, creating your 
personal greeting or scheduling events in your calendar. You 
can enter alphanumeric characters by using your phone’s 
keypad.
You are provided with the following text input modes.
 ●T9 mode: This mode allows you to enter words with only 
one keystroke per letter. Each key on the keypad has more 
than one letter – when you press the 
5 key once, J, K...

Entering Text                                                                                      
 40
Using the T9 Mode
The T9 predictive text input mode allows you to key in any 
character using single keystrokes. This text input mode is based 
on a built-in dictionary.
1. When you are in the T9 predictive text input mode, start 
entering a word by pressing keys 
2 to 9. Press each key only 
once for one letter. 
Example:to enter HELLO in the T9 mode, 
press 
4, 3, 5, 5 and 6.
The word that you are...

Entering Text
41
Using the Upper/Lower-Case Character Mode
Use the 1 to 0 keys to enter your text. 
1. Press the key labeled with the required letter:
 ●Once for the first letter ●Twice for the second letter, and so on
2. Select the other letters in the same way.
Note: The cursor moves to the right when you press a different key. 
When entering the same letter twice or a different letter on the same 
key, just wait for a few seconds for the cursor to move right 
automatically, and then select the next...

Entering Text                                                                                      
 42
Using the Symbol Mode
The symbol mode enables you to insert symbols in a text 
message. 
Use the navigation keys to scroll to the desired symbol and then 
press 
OK soft key to insert the highlighted symbol into your 
message. 
Using the Number Mode
The Number mode enables you to enter numbers in a text 
message (a telephone number for example). Press the keys 
corresponding to the required digits...

In-Call Options
43
In-Call Options
Your phone provides a number of control functions that you can 
use during a call.
Putting a Call on Hold
You can place the current call on hold whenever you want. You 
can make another call while you have a call in progress if this 
service is supported by the network. Of these two calls, one is 
active and the other is on hold and you can switch between the 
calls.
To place a call on hold, simply press the 
Hold soft key. You can 
reactivate the call whenever you...

In-Call Options                
44
Switching the Microphone Off (Mute)
You can temporarily switch your phone’s microphone off, so that 
the other party cannot hear you.
Example: You wish to say something to another person in the 
room but do not want the other party to hear you.
To switch the microphone off temporarily, proceed as follows.
1. Press the 
Options soft key.
2. If necessary, press the   key to highlight the 
Mute option.
3. Press the 
OK soft key. 
The other party can no longer hear you.
To...

In-Call Options
45
Searching for a Number in the Phonebook
You can search for a number in the phonebook during a call.
1. Press the 
Options soft key.
2. Press the   key to highlight the 
Phonebook option.
3. Press the 
OK soft key.
The phonebook entries are listed.
4. Enter the name that you wish to find.
If you enter the start of the name, the phonebook entries 
are listed, starting with the first entry matching your input. 
The entry is also highlighted.
5. To view the highlighted entry, press the...

In-Call Options                
46
Making a Multiparty Call
A multiparty call is a network service that allows up to six 
people to take part simultaneously in a multiparty or conference 
call. For more information, contact your service provider.
Setting up the Multiparty Call
1. Call the first participant in the normal way.
2. Call the second participant in the normal way. The first call is 
automatically put on hold.
3. To join the first participant to the multiparty call, press the 
Options soft key...