Samsung X105 User Guide
Here you can view all the pages of manual Samsung X105 User Guide. The Samsung manuals for Phone are available online for free. You can easily download all the documents as PDF.
Page 21
Getting Started 17 3. Slide the SIM card into the SIM card holder so that the holder locks the card in position. Make sure that the cut corner is top right and the gold contacts of the card face into the phone. Note: When you need to remove the SIM card, slide it, as shown, and take it out of the holder. 4. Place the battery back, taking care to match the tabs on the battery with the grooves on the phone.
Page 22
Getting Started 18 5. Slide the battery towards the top of the phone until it clicks into place. Make sure that the battery is properly installed before switching on the power. Charging a Battery Your phone is powered by a rechargeable Li-ion battery. A travel adapter is provided with your phone. Use only approved batteries and chargers. Ask your local Samsung dealer for further details. The phone can be used...
Page 23
Getting Started 19 2. Connect the adapter to a standard AC wall outlet. 3. When charging is finished, disconnect the adapter from the power outlet and from the phone by pressing the grey tabs on both sides of the connector and pulling the connector out. Low Battery Indicator When the battery is weak and only a few minutes of talk time remain, you will hear a warning tone and a message will be repeated at regular intervals on the display: When the battery becomes too weak for the phone to operate,...
Page 24
Getting Started 20 Switching the Phone On/Off 1. Hold down the key until the phone switches on. 2. If the phone asks for a password, key in the password and press the OK soft key. The phone password is factory set to 00000000. For further details, see page 107. 3. If the phone asks for a PIN, key in the PIN and press the OK soft key. For further details, see page 108. The phone searches for your network and...
Page 25
Getting Started 21 Locking or Unlocking the keypad You can lock the keypad to avoid pressing keys by mistake. In Idle Mode, press and hold the key until the LOCK icon and “Keypad Locked” appear on the display. You can answer incoming calls using any keys, even if you lock the keypad. When you receive a call in the key lock mode, the keypad is automaticlly unlocked. After the call, the key lock mode is canceled. You can dial emergency calls even if you lock the keypad. When the confirming...
Page 26
Call Functions 22 Call Functions Making a Call When the idle screen is displayed, key in the area code and phone number, and press the key. Note: If you have checked the Auto Redial option in the Extra Settings menu (Menu 5.6.1), the number is redialed automatically up to ten times when the person does not answer the call or is already on the phone; see page 86 for further details. Making a International Call 1....
Page 27
Call Functions 23 Ending a Call When you have finished your call, briefly press the key. Redialing the Last Number The phone stores the numbers you dialed, received or missed.To recall any of these numbers, proceed as follows. 1. If you have typed any characters on the display, clear the display by holding down the key for more than one second. 2. Press the key to display a list of the last numbers in the order in which the calls were made. 3. Use the and keys to scroll through the numbers...
Page 28
Call Functions 24 Adjusting the Volume During a call, if you want to adjust the earpiece volume, use the keys on the left side of the phone. Press the key to increase and the key to decrease the volume. In idle mode, you can adjust the key volume using the and keys. Answering a Call When somebody calls you, the phone rings and the following screen appears on each display. If the caller can be identified,...
Page 29
Call Functions 25 Viewing Missed Calls If you are unable to answer a call for any reason, you can find out who was calling you, provided that this service is available. This option provides the ability to call the person back, if necessary. The number of missed calls is displayed on the idle screen immediately after a call was missed. To view the missed call immediately 1. Press the View soft key. 2. The number corresponding to the most recent missed call is displayed, if available. To.... Then...
Page 30
Call Functions 26 Editing a Missed Call Number Note: If the number corresponding to the missed call is not available, the Edit Number option is not displayed. 1. Press the Options soft key. 2. Press the or key to highlight the Edit option. 3. Press the Select soft key. 4. Change the number as required. Press the Save soft key. If no change is required press the Exit soft key. Deleting a Missed Call 1. Press...