Samsung UE 40C6000 User Manual

							41English
04 Adva\fced	 Features	¦Liste\fi\fg 	 through 	 a 	 Receiver 	
You can listen to s\yound through a receiver (i\be Home T\yheatre) instead o\f the TV	Speaker\b
1.	 Select 
Receiver and set to O\f\b
2.	 Press the EXIT button to exit\b
 ✎I\f your receiver supports audio only, it may not appear in the device list\b
 ✎The receiver will work when you have properly connected the optical in jack o\f the receiver to the DIGITAL	AUDIO	O
UT 	 (OPTICAL) jack o\f the T V\b
 ✎When the receiver (i\be Home Theatre) is set to On, you can hear sound output \from the T V’s Optical jack\b When the 
T V is displaying a DT V (aerial) signal, the T V will send out 5\b1 channel sound to the receiver\b When the source is a 
digital component such as a DVD and is connected to the T V via HDMI, only 2 channel sound will be heard \from 
the receiver\b
 ✎NOTE
 xYou can only control Anynet+ devices using the T V remote control, not the buttons on the T V\b
 xThe T V remote control may not work under certain conditions\b I\f this occurs, reselect the Anynet+ device\b
 xThe Anynet+ \functions do not operate with other manu\facturers’ products\b
	¦Troub\beshooti\fg 	 for 	 A\fy\fet+
Prob\bem Possib\be	S o\butio\f
Anynet+ does not work\b •
 C

heck i\f the device is an Anynet+ device\b The Anynet+ system supports Anynet+ devices only\b
•
 C

onnect only one receiver (home theatre)\b
•
 C

heck i\f the Anynet+ device power cord is properly connected\b
•
 C

heck the Anynet+ device’s Video/Audio/HDMI cable connections\b
•
 C

heck whether A\fy\fet+
	(

HDMI-CEC) is set to O\f in the Anynet+ setup menu\b
•
 C

heck whether the TV remote control is in TV mode\b
•
 C

heck whether it is Anynet+ exclusive remote control\b
•
 A

nynet+ doesn’t work in certain situations\b (Searching channels, operating  Media
	P

\bay or  P\bug
	&	P

\bay (Initial 
setup), etc\b)
•
 W

hen connecting or removing the HDMI cable, please make sure to search devices again or turn your TV o\f\f 
and on again\b
•
 C

heck i\f the Anynet+ Function o\f Anynet+ device is set on\b
I want to start Anynet+\b •
 C

heck i\f the Anynet+ device is properly connected to the TV and check i\f the  A\fy\fet+
	(

HDMI-CEC) is set to 
O\f  in the Anynet+ Setup menu\b
•
 P

ress the TOOLS button to display the Anynet+ menu and select a menu you want\b
I want to exit Anynet+\b •
 S

elect View
	T

V in the Anynet+ menu\b
•
 P

ress the SOURCE
	b

utton on the TV remote control and select a device other than Anynet+ devices\b
•
 P

ress P 
>/
						

							42English
Ad\fanced Features
AllShare
	¦About 	 A\b\bShare
A\b\bShare connects your TV, mobile phones an\yd other 
devices which are compatible through a network\b On \yyour 
TV, you can view call\y arrivals, SMS mess\yages and schedules \y
set on your mobile \yphones\b In addition,\y you can play media \y
contents including \yvideos, photos and \ymusic saved on your\y 
mobile phones or t\yhe other devices (s\yuch as your PC) by \y
controlling them on the\y TV via the networ\yk\b Additionally, you \y
can use your TV as \ya monitor \for your \ymobile when browsing 
a web page\b
 ✎For more in\formation, visit “www\bsamsung\bcom” or 
contact the Samsung call centre\b Mobile devices may 
need additional so\ftware installation\b For details, re\fer to 
each device's user’s guide\b
	¦Setti\fg 	 Up 	 A\b\bShare
Setup
 ■Message 	 (O\f 	 / 	 Off): Enables or disable\ys the message 
\function (\for call \yarrivals, SMS messa\yges and schedules 
set on your mobile \yphones)\b
 ■ Media

	 (O\f 	 / 	 Off): Enables or disable\ys the media 
\function\b When the \ymedia \function is o\yn, it plays videos,\y 
photos and music \fr\yom a mobile phone \yor other device 
that supports A\b\bShare\b
 ■ Scr

ee\fShare 	 (O\f 	 / 	 Off): Enables or disable\ys the 
ScreenShare \function \for usin\yg mobile phone as \ya 
remote control\b
 ■ TV

	 \fame: Sets the TV name \yso you can find it e\yasily on 
a mobile device\b
 ✎I\f you select User	I\fput , yo u can type on the T V 
using the OSK (On Screen Keyboard)\b
Message	/	Media	/	Scree\fShare
Shows a list o\f mob\yile phones or conn\yected devices which\y 
have been set up w\yith this TV \for usi\yng the Message, 
Media, or Scree\fShare \function\b
 ✎The Media \function is available in all mobile devices 
which support A\b\bShare \b
 ■A\b\bowed

	 / 	 De\fied: Allows/Blocks th\ye mobile phone\b
 ■De\bete

: Deletes the mobi\yle phone \from the list\b
 ✎This \function only deletes the name o\f the mobile 
\from the list\b I\f the deleted mobile device is turned 
on or trys to connect to the T V, it may appear on 
the list again\b
Usi\fg
	
the 	 Message 	 Fu\fctio\f
Using this \function\y, you view call arr\yivals, SMS messages\y 
and schedules set o\yn the mobile phone\y through the alarm 
window while watchi\yng TV\b
 ✎NOTE
 xTo disable the alarm window, set Message to Off in 
Setup o\f A\b\bShare \b
 xI\f OK is selected, or i\f OK is not selected a\fter the 
message has appeared three times, the message 
will be deleted\b The message is not deleted \from the 
mobile phone\b
 xThe alarm window can be displayed while using 
some applications such as Media
	 P\bay etc\b To view 
the contents o\f a message, switch to T V viewing 
mode\b
 xWhen a message \from an unknown mobile phone is 
displayed, select the mobile phone on the message 
menu in A\b\bShare and select De\fied to block the 
phone\b
Message
	 View
I\f a new SMS message\y arrives while you \yare watching 
TV, the alarm window \yappears\b I\f you clic\yk the OK 
button, the conten\yts o\f the message a\yre displayed\b 
 ✎You can con\figure the viewing settings \for SMS 
messages on your mobile phones\b For the 
procedures, re\fer to the mobile phone manual\b
 ✎Some types o\f characters may be displayed as 
blank or broken characters\b
AllShare™3/7
E Select    R Return    e Exit Setup    R Return
Setup
Message
Media
ScreenShare Message
 : On
Media
 : On
ScreenShare
 
: On
TV name

 
: Home 
 TV
[UC6000-XU]BN68-02748D-01Eng.indb   422010-04-01   오후 7:23:54 
						

							43English
04 Adva\fced	 FeaturesCa\b\b	Arriva\b	A\barm
I\f a call arrives w\yhile you ar e watching TV, the alarm 
window appears\b
Schedu\be
	 A\barm
While you are watching TV, the alarm window \yappears to 
display the registered event\b
 ✎You can con\figure viewing settings \for schedule 
contents on your mobile phones\b For the 
procedures, re\fer to the mobile phone manual\b
 ✎Some special characters may be displayed as 
blank or broken characters\b
Usi\fg
	
the 	 Media 	 Fu\fctio\f 	
An alarm window app\years in\forming the \yuser that the media\y 
contents (videos, p\yhotos, music) sent\y \fr

om a mobile phone \y
will be displayed on\y your TV\b The contents are played 
automatically 3 sec\yonds a\fter the alar\ym window appears\b 
I\f you press the RETURN or EXIT button when the a\ylarm 
window appears, the\y media contents are not played\b
 ✎NOTE
 xI\f the media \function executes \for the \first time, 
the warning popup window appears\b Press the 
ENTER
E button to select A\b\bow , then you can use 
Media \function on that device\b
 xTo turn o\f\f the media contents transmission \from 
the mobile phone, set Media to Off in the A\b\bShare 
setup\b 
 xContents may not be played on your T V depending 
on their resolution and \format\b
 xThe ENTERE and ◄ / ► buttons may not work 
depending on the type o\f media content\b
 xUsing the mobile device, you can control the media 
playing\b For details, re\fer to each mobile’s user’s 
guide\b
 xWhen you want to play media contents \from 
your PC, select the PC icon on the main display 
o\f A\b\bShare \b Then the T V’s Media
	 P\bay menu 
automatically changes\b For more detail in\formation, 
re\fer to “Media Play” (p\b 32)\b
Usi\fg	Scree\fShare	Fu\fctio\f
Scr eenshare displays the same\y web page as provide in 
mobile\b Using ScreenShare, you can open the\y various 
contents saved in a\y mobile phone\b For \yexample, the image\y 
below displays an a\yccess page \for cont\yents \from a mobile\b 
You can read the mobile’s various files and \yview the phone 
book and calendar o\yn the TV\b Also, in phone bo\yok, you can 
make a call to oth\yer person, or can \ysend to SMS\b
 ✎NOTE
 xIn Samsung mobile, ScreenShare must be  installed 
and the supporting application must be executed; 
then you can use the ScreenShare \function\b
 xAvailable buttons on your remote control may vary 
\for each page\b
 xDoc	Viewer can read \files in doc \format, but cannot 
m odi\fy them\b
 xThe screen display may di\f\fer depending on the 
connected device\b
Usi\fg
	
your 	 Samsu\fg 	 pho\fe 	 to 	 co\ftro\b 	 your 	 TV 	 Simp\by
Be\fore you can use this \y\feature, you must connect\y to 
a Samsung mobile ph\yone that supports \yScreenShare 
\functions\b When ope\yrating the TV with\y your mobile phone,\y 
only the POWER, 
Y, P and MUTE buttons are 
supported\b
 ✎Even i\f you keep pressing down on a control button 
(channel or volume) on the mobile phone, the value will 
only go up or down by one unit\b
E Select     Return
My Mobile
Contacts CalendarDoc Viewer
Deny
Allow
“Unknown Device 0” is requesting that the media file be allowed to play . 
If you wish to allow the media file to be played at your device, please press 
“Allow”, otherwise press “Deny”.
You can also change the setting (or resetting) of this feature at “AllShare 
Setup”.
Warning: Please note that if your device is connected to unsecured or 
unfamiliar network, unwanted or inappropriate contents might be played.
If you are not sure about the network's identity or content’s appropriateness, 
we strongly recommend that you do not “Allow” the request to play .
[UC6000-XU]BN68-02748D-01Eng.indb   432010-04-01   오후 7:23:54 
						

							44English
Other In\bormation
Analogue Channel Teletext Feature
The index page o\f t\yhe Teletext service gi\yves you in\formation\y on how to use the\y service\b For Teletext in\formation\y to be displayed
correctly, channel reception must be s\ytable\b Otherwise, i\yn\formation may be m\yissing or some pag\yes may not be displ\yayed\b
 ✎You can change Teletext pages by pressing the numeric buttons on the remote control\b
1
/ (Teletext on/mix/o\f\f): 
Activates the Teletext mode \for th\ye 
current channel\b Press the button 
twice to overlap t\yhe Teletext mode 
with the current broadcasting 
screen\b Press it one more time to 
exit teletext\b
2
8 (store): Stores the Teletext 
pages\b
3
4 (size): Displays t\yhe teletext 
on the upper hal\f o\y\f the screen in 
double-size\b To move the text to\y 
the lower hal\f o\f t\yhe screen, press 
it again\b For norma\yl display, press 
it once again\b
4
9 (hold): Holds the \ydisplay at 
the current page, in the c\yase that 
there are several secondary\y pages 
that \follow automat\yicially\b To undo, 
press it again\b
5 Colour buttons (red, green, yellow, 
blue): I\f the FASTEXT system 
is used by the broadcasting 
company, the di\f\ferent topics on 
a Teletext page are colour-coded 
and can be selected\y by pressing 
the coloured buttons\b Press the 
colour corresponding to the to\ypic 
o\f your choice\b A ne\yw colour-
coded page is displa\yyed\b Items 
can be selected in \ythe same way\b 
To display the previous or next 
page, press the corresponding 
coloured button\b
6
0 (mode): Selects th\ye Teletext 
mode (LIST/ FLOF)\b
I\f pressed during LIST mo\yde, 
switches the mode t\yo List save 
mode\b In List save \ymode, you can 
save a Teletext page into \ya list 
using the 
8(store) button\b
7
1 (sub-page): Displ\yays the 
available sub-page\y\b
2 (page up): Displa\yys the next  Teletext page\b 8
3 (page down): Displ\yays the 
previous Teletext page\b 9
6 (index): Displays \ythe index 
(contents) page at\y any time while  you are viewing Teletext\b 0
5 (reveal): Displays th\ye hidden 
text (answers to q\yuiz games, \for  example)\b To display the norma\yl  screen, press it again\b !
7 (cancel): Shrinks \ythe Teletext 
display to overlap \ywith the current  broadcast\b@
Typica\b
	 Te\betext 	 page
Part Co\fte\ftsA Selected page 
number\b
B Broadcasting channel \y
identity\b
C Current page number 
or search indications\b
D Date and time\b
E Text\b
F Status in\formation\b \y
FASTEXT in\formation\b
CH LIST
SOURCE
MENU
TOOLS
RETURNEXIT
INFO
TTX/MIX
ABCD
6
7
8
9
!
@
0
1
3
2
4
5
G\fRE-CH
Other In\bormation
[UC6000-XU]BN68-02748D-01Eng.indb   442010-04-01   오후 7:23:55 
						

							45English
05 Other	 I\fformatio\fAssembling the Cabl\hes
Sta\fd	Type
Enclose the cables \yin the Cable T ie so that the cab\yles are not visible through the transparent stand\b
3
1
2
1
2
3
Wa\b\b-Mou\ft	Type
 ✎Do not pull the cables too hard when arranging them\b This may cause damage to the product’s connection terminals\b
[UC6000-XU]BN68-02748D-01Eng.indb   452010-04-01   오후 7:23:56 
						

							46English
Other In\bormation
\fnstalling the Wall Mount
Assemb\bi\fg	the	B\ba\fki\fg	Bracket
When installing th\ye TV onto a wall, \yattach the Blankin\yg Bracket as shown\y\b
Assemb\bi\fg
	 Power-Cord
When Installing th\ye TV onto a wall, \yattach the Power-Cord as shown\b
1.	 Remove the screw shown in the fir\yst picture above\b
2.	 Attach the power c\yord clamp to the powe\yr cord\b
3.	 Mount the power co\yrd clamp to the TV, using the removed screw, as shown\b
Prepari\fg
	 before 	 i\fsta\b\bi\fg 	 Wa\b\b-Mou\ft
Case	A.	I\fsta\b\bi\fg	the	SAMSUNG	Wa\b\b-Mou\ftCase 	 B. 	 I\fsta\b\bi\fg 	 a\fother 	 compa\fy’s 	 Wa\b\b-Mou\ft
11
To install a wall-m\yount, use the Holde\yr-Ring 1\b
I\fsta\b\bi\fg
	 the 	 Wa\b\b 	 Mou\ft 	 Kit
The wall mount kit\y (sold separately) \yallows you to mount\y the TV on the wal\yl\b
For detailed in\forma\ytion on installing\y the wall mount, s\yee the instruction\ys provided with the wal\yl mount\b Contact a \ytechnician \for 
assistance when in\ystalling the wall \ymount bracket\b
Samsung Electronics is not responsible \for any \ydamage to the product or injury to \yyoursel\f or others \yi\f you elect to ins\ytall the 
TV on your own\b
123
Blanking Bracket
[UC6000-XU]BN68-02748D-01Eng.indb   462010-04-01   오후 7:23:58 
						

							47English
05 Other	 I\fformatio\fWa\b\b	Mou\ft	Kit	Specificatio\fs	(VESA)	
 ✎The wall mount kit is not supplied, but sold separately\b
Install your wall m\yount on a solid wal\yl perpendicular to \ythe floor\b When attaching to\y other building mat\yerials, please con\ytact 
your nearest dealer\b I\f installed on a \yceiling or slanted \ywall, it may \fall a\ynd result in severe personal injury\b
 ✎NOTE
 xStandard dimensions \for wall mount kits are shown in the table below\b
 xWhen purchasing our wall mount kit, a detailed installation manual and all parts necessary \for assembly are provided\b
 xDo not use screws that do not comply with the VESA standard screw speci\fications\b
 xDo not use screws that are longer than the standard dimension or do not comply with the VESA standard screw 
speci\fications\b Screws that are too long may cause damage to the inside o\f the T V set\b
 xFor wall mounts that do not comply with the VESA standard screw speci\fications, the length o\f the screws may di\f\fer 
depending on the wall mount speci\fications\b
 xDo not \fasten the screws that are too strongly; this may damage the product or cause the product to \fall, leading to 
personal injury\b Samsung is not liable \for these kinds o\f accidents\b
 xSamsung is not liable \for product damage or personal injury when a non-VESA or non-speci\fied wall mount is used or 
the consumer \fails to \follow the product installation instructions\b
 xDo not mount the T V at more than a 15 degree tilt\b
Product Family inches VESA Spec\b (A * B) Standard Screw Quantity
LED-TV
[Ultra-Slim] 19~22 75 X 75
M4
4
23~29 200 X 100
M8
32~37 200 X 200
40~55 400 X 400
56~65 600 X 400
Do not install your\y Wall Mount Kit whil\ye your TV is turned on\b It may result in personal \yinjury due to 
electric shock\b
[UC6000-XU]BN68-02748D-01Eng.indb   472010-04-01   오후 7:23:59 
						

							48English
Other In\bormation
Anti-theft Kensingt\hon Lock
The Kensington Loc\yk is not supplied b\yy Samsung\b It is a d\yevice used to 
physically fix the s\yystem when using it\y in a public place\y\b The appearance an\yd 
locking method may \ydi\f\fer \from the illustratio\yn depending on the \ymanu\facturer\b 
Re\fer to the manual\y provided with the Ken\ysington Lock \for ad\yditional in\formatio\yn 
on proper use\b
 ✎Please \find a “K” icon on the rear o\f the T V\b A kensington slot is beside the 
“K” icon\b
To lock the product, \follow these\y steps:
1.	 Wrap the Kensington\y lock cable around a large, stati\yonary object such a\ys 
desk or chair\b
2.	 Slide the end o\f the\y cable with the lo\yck attached through the looped end\y o\f 
the Kensington loc\yk cable\b
3.	 Insert the locking\y device into the Ke\ynsington slot on t\yhe product (1)\b
4.	 Lock the lock\b
 ✎These are general instructions\b For exact instructions, see the User manual supplied with the locking device\b
 ✎The locking device has to be purchased separately\b
 ✎The location o\f the Kensington slot may be di\f\ferent depending on the T V model\b
Securing the TV to \hthe wall
Cautio\f: Pulling, pushing\y, or climbing onto\y the TV may cause t\yhe TV to \fall\b In p\yarticular, ensure that your 
children do not hang over\y or destabilize the\y TV; doing so may caus\ye the TV to tip ov\yer, resulting in seriou\ys 
injuries or death\b \yFollow all sa\fety p\yrecautions provided in the inclu\yded Sa\fety Flyer\b For added stabilit\yy and 
sa\fety, install the\y anti-\fall device a\ys \follows\b
	¦To 	 Avoid 	 the 	 TV 	 from 	 Fa\b\bi\fg 	
1.	Put the screws into the clamp\ys and firmly \fasten t\yhem onto the wall\b \y
Confirm that the sc\yrews have been firml\yy installed onto th\ye wall\b
 ✎You may need additional material such as an anchor depending on 
the type o\f wall\b
 ✎Since the necessary clamps, screws, and string are not supplied, 
please purchase these additionally\b
2.	 Remove the screws \from the back centre o\f the TV, put the screws into 
the clamps, and the\yn \fasten the screws onto the TV ag\yain\b
 ✎Screws may not be supplied with the product\b In this case, please 
purchase the screws o\f the \following speci\fications\b
 ✎Screw Speci\fications
 xFor a 19 ~ 22 inch : M4
 xFor a 23 ~ 65 inch : M8
3.	 Connect the clamps\y fixed onto the TV a\ynd the clamps fixed \yonto the wall 
with a strong cable and then \ytie the string tig\yhtly\b
 ✎NOTE
 xInstall the T V near to the wall so that it does not \fall backwards\b
 xIt is sa\fe to connect the string so that the clamps \fixed on the 
wall are equal to or lower than the clamps \fixed on the T V\b
 xUntie the cable be\fore moving the T V\b
4.	 Veri\fy all connectio\yns are properly secured\b Periodically che\yck 
connections \for any\y sign o\f \fatigue \for\y \failure\b I\f you have any do\yubt about 
the security o\f your\y connections, cont\yact a pro\fessional installe\yr\b
1

Wall

[UC6000-XU]BN68-02748D-01Eng.indb   482010-04-01   오후 7:24:00 
						

							49English
05 Other	 I\fformatio\fTroubleshooting
I\f you have any ques\ytions about the TV\y, first re\fer to this list\b \yI\f none o\f these tr\youbleshooting tips\y apply, please visi\yt “www\b
samsung\bcom,” then \yclick on Support, o\yr contact the call\y centre listed on the bac\yk-cover o\f this man\yual\b
Issues So\butio\fs 	 a\fd 	 Exp\ba\fatio\fs
Picture QualityFirst o\f all, please per\form the Picture	T est and confirm that your TV is properly displaying test image\b 
(go to  MENU  - Support	-	S
e\bf	D iag\fosis - Picture	T
est) (p\b 23)
I\f the test image is properly displayed, the poor picture may caused by the source or signal\b
The TV image does not look as good as it 
did in the store\b •
 I

\f you have an analogue cable/set top box, upgrade to a digital set top box\b Use HDMI or Component 
cables to deliver HD (high definition) picture quality\b
•
 C

able/Satellite subscribers: Try HD stations \from the channel line up\b
•
 A

ntenna connection: Try HD stations a\fter per\forming Auto programme\b
 ✎Many HD channels are up scaled \from SD(Standard Definition) contents\b
• A
djust the Cable/Set top box video output resolution to 1080i or 720p\b
•
 M

ake sure you are watching the TV at the minimum recommended distance based on the size and 
definition o\f the signal\b
The picture is distorted: macro block error, 
small block, dots, pixelization •
 C

ompression o\f video contents may cause picture distortion especially in \fast moving pictures such 
as sports and action movies\b
•
 L

ow signal level or bad quality can cause picture distortion\b This is not a TV issue\b
•
 M

obile phones used close to the TV (cca up to 1m) may cause noise in picture on analogue and 
digital TV\b
Colour is wrong or missing\b •
 I

\f you’re using a component connection, make sure the component cables are connected to the 
correct jacks\b Incorrect or loose connections may cause colour problems or a blank screen\b
There is poor colour or brightness\b •
 A

djust the  Picture options in the TV menu\b (go to  Picture mode /  Co\bour
	/	B

right\fess
	/	S
 harp\fess) 
(p\b 15) 
•
 A

djust  E\fergy
	S

avi\fg option in the TV menu\b (go to  MENU - Picture
	-	E

co
	S
 o\butio\f
	-
 	
E

\fergy
	S
 avi\fg ) (p\b 15)
•
 T

ry resetting the picture to view the de\fault picture settings\b (go to  MENU - Picture
	-	P

icture
	R
 eset) 
(p\b18)
There is a dotted line on the edge o\f the 
screen\b •
 I

\f the picture size is set to  Scree\f
	F

it, change it to  16:9 (p\b 17)\b 
•
 C

hange cable/set top box resolution\b
The picture is black and white\b •
 I

\f you are using an AV composite input, connect the video cable (yellow) to the Green jack o\f 
component input 1 on the TV\b
When changing channels, the picture 
\freezes or is distorted or delayed\b •
 I

\f connected with a cable box, please try to reset the cable box\b Reconnect the AC cord and wait until 
the cable box reboots\b It may take up to 20 minutes\b
•
 S

et the output resolution o\f the cable box to 1080i or 720p\b
Sound Quality First o\f all, please per\form the Sou\fd
	T

est to confirm that your TV audio is properly operating\b
(go to  MENU  - Support
	-	S

e\bf
	D
 iag\fosis
	-	S
 ou\fd
	T
 est) (p\b 23)
I\f the audio is OK, the sound problem may caused by the source or signal\b
There is no sound or the sound is too low 
at maximum volume\b •
 P

lease check the volume the o\f external device connected to your TV\b
The picture is good but there is no sound\b •
 S

et the  Speaker
	S

e\bect option to  TV
	S

peaker in the sound menu (p\b 19)\b 
•
 I

\f you are using an external device, make sure the audio cables are connected to the correct audio 
input jacks on the TV\b
•
 I

\f you are using an external device, check the device’s audio output option (ex\b you may need to 
change your cable box’s audio option to HDMI when you have a HDMI connected to your TV)\b
•
 I

\f you are using a DVI to HDMI cable, a separate audio cable is required\b
•
 I

\f your TV has a headphone jack, make sure there is nothing plugged into it\b
The speakers are making an inappropriate 
noise\b •
 C

heck the cable connections\b Make sure a video cable is not connected to an audio input\b
• For antenna or cable connections, check the signal strength\b Low signal level may cause sound distortion\b
No Picture, No Video
The TV won’t turn on\b •
 M

ake sure the AC power cord is securely plugged in to the wall outlet and the TV\b
•
 M

ake sure the wall outlet is working\b
•
 T

ry pressing the POWER button on the TV to make sure the problem is not the remote\b I\f the TV turns 
on, re\fer to “The remote control does not work” below\b
The TV turns o\f\f automatically\b •
 E

nsure the S\beep
	T

imer is set to  Off in the  Setup menu (p\b 20)\b 
•
 I

\f your PC is connected to the TV, check your PC power settings\b
•
 M

ake sure the AC power cord is plugged in securely to the wall outlet and the TV\b
•
 W

hen watching TV \from an antenna or cable connection, the TV will turn o\f\f a\fter 10 ~ 15 minutes i\f 
there is no signal\b
[UC6000-XU]BN68-02748D-01Eng.indb   492010-04-01   오후 7:24:00 
						

							50English
Other In\bormation
IssuesSo\butio\fs 	 a\fd 	 Exp\ba\fatio\fs
There is no picture/Video\b• C heck cable connections (remove and reconnect all cables connected to the TV and external 
devices)\b
•
 S

et your external devices’ (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match the 
connections to the TV input\b For example, i\f an external device’s output is HDMI, it should be connect 
to an HDMI input on the TV\b
•
 M

ake sure your connected devices are powered on\b
•
 B

e sure to select the TV’s correct source by pressing the  SOURCE
	b

utton on the TV remote\b
RF(Cable/Antenna) Connection
The TV is not receiving all channels\b •
 M

ake sure the Antenna cable is connected securely\b
•
 P

lease try P\bug
	&	P

\bay (Initial setup) to add available channels to the channel list\b Go to  MENU - 
Setup
	-	P

\bug
	&	P
 \bay (Initial setup) and wait \for all available channels to be stored (p\b 7)\b
•
 V

eri\fy the Antenna is positioned correctly\b
The picture is distorted: macro block error 
small block, dots, pixelization •
 C

ompression o\f video contents may cause picture distortion, especially with \fast moving pictures 
such as sports and action movies\b
•
 A

 low signal can cause picture distortion\b This is not a TV issue\b
PC Connection
A “Mode Not Supported” message 
appears\b •
 S

et your PC’s output resolution and \frequency so they match the resolutions supported by the TV  
(p\b 24)\b 
“PC” is always shown on the source list, 
even i\f a PC is not connected\b •
 T

his is normal; “PC” is always shown on the source list, regardless o\f whether a PC is connected\b
The video is OK but there is no audio\b •
 I

\f you are using a HDMI connection, check the audio output setting on your PC\b
Network Connection (Depending on Models)
Wireless network connection \failed\b •
 S

amsung Wireless USB dongle is required to use a wireless network\b
•
 M

ake sure the Network Connection is set to Wire\bess (p\b 27)\b
•
 M

ake sure the TV is be connected to a wireless IP sharer (router)\b
Others
The picture won’t display in \full screen\b •
 H

D channels will have black bars on either side o\f the screen when displaying up scaled SD (4:3) 
contents\b
•
 B

lack bars on  the top and bottom will appear during movies that have aspect ratios di\f\ferent \from 
your TV\b
•
 A

djust the picture size options on your external device or TV to \full screen\b
The remote control does not work\b •
 R

eplace the remote control batteries with the poles (+/–) in the right direction\b
•
 C

lean the sensor’s transmission window on the remote\b
•
 T

ry pointing the remote directly at the TV \from 5~6 \feet away\b
The cable/set top box remote control 
doesn’t turn the TV on or o\f\f, or adjust the 
volume\b •
 P

rogramme the Cable/Set top box remote control to operate the TV\b Re\fer to the Cable/Set user 
manual \for the SAMSUNG TV code\b
A “Mode Not Supported” message 
appears\b •
 C

heck the supported resolution o\f the TV, and adjust the external device’s output resolution 
accordingly\b Re\fer to the resolution settings on page 24 o\f this manual\b
There is a plastic smell \from the TV\b •
 T

his smell is normal and will dissipate over time\b
The TV  Sig\fa\b
	I

\fformatio\f is unavailable 
in the Sel\f Diagnostic Test menu\b •
 T

his \function is only available with digital channels \from an Antenna / RF/Coax connection (p\b 23)\b 
[UC6000-XU]BN68-02748D-01Eng.indb   502010-04-01   오후 7:24:00