Samsung UE 40C6000 User Manual
Have a look at the manual Samsung UE 40C6000 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
31English 04 Adva\fced FeaturesSWL(Samsu\fg Wire\bess Li\fk) This \function lets \yyou connect a Samsu\yng device that supports the PBC (\yWPS) to your TV\b You can connect devices to the TV e\yven i\f a sharer is not connecte\yd to the TV\b ✎I\f a Samsung Wireless L AN Adapter is connected to the USB 2 port, the network may not operate normally\b We recommend to connecting it to the USB 1 (HDD) port\b ✎Only sharers using the 2\b4 Ghz band are supported\b Sharers using the 5 Ghz band are not supported\b SWL co\f\fect You can directly connect a dev\yice that supports \ythe PBC (WPS) to the TV\b ✎This \function is available when SWL(Samsu\fg Wire\bess Li\fk) is set to O\f\b How to co\f\fect Samsu\fg Wire\bess Li\fk For the procedures to establish a \yconnection, re\fer to the \following: 1. Follow Steps 1 through 5 in the “How\y to set up using PBC (WPS)” (p\b 28)\b 2. Select SWL(Samsu\fg Wire\bess Li\fk) by using the ▼ button and press the ENTER E button to turn it On\b 3. Select SWL co\f\fect by using the ▼ button and press the ENTER E button\b 4. I\f the “Press the PBC butto\f o\f the PBC(WPS) supported device to co\f\fect withi\f 120 seco\fds.” message appears, p\yress the PBC button\y on the device to connect\b ✎For more in\formation, re\fer to the wireless network setup manual o\f the device to be connected\b 5. I\f the device is co\ynnected properly to the TV a\f\yter starting count on \ymessage box then m\yessage box will be disappeared automatically\b ✎I\f the connection \fails, please retry a\fter 2 minutes\b If Your TV Fai\bs to Co\f\fect to the I\fter\fet Y our TV may not be a\yble to connect to \ythe Internet because your ISP ha\ys permanently registered the MAC address (a unique ident\yi\fying number) o\f yo\yur PC or modem, which \yit then authentica\ytes each time you connect to the \yInternet as a way o\f preventing unauthorized access\y\b As your TV has a \ydi\f\ferent MAC address, your ISP can n\yot authenticate it\ys MAC address, and your TV can not\y connect\b To resolve this problem, ask your ISP\y about the procedures required to connect devic\yes other than a PC\y (such as your TV) t\yo the Internet\b I\f your Internet service provider requires an ID or passwo\yrd to connect to the \yInternet, your TV may no\yt be able to connect to the Int\yernet\b I\f this is the\y case, you must ent\yer your ID or password when connecting t\yo the Internet\b The internet connection may \y\fail because o\f a fi\yrewall problem\b I\f this is t\yhe case, contact yo\yur Internet service provider\b I\f you cannot conne\yct to the Internet even a\fter you \yhave \followed the procedures o\f your Internet service provider, please contact Samsung Electronics at 1-800-SAMSUNG\b [UC6000-XU]BN68-02748D-01Eng.indb 312010-04-01 오후 7:23:44
32English Ad\fanced Features Me\bia Play ¦Co\f\fecti\fg a USB Device 1. Turn on your TV\b 2. Connect a USB devic\ye containing photo\y, music and/or movi\ye files to the USB 1 (HDD) or USB 2 jack on the side o\y\f the TV\b 3. When USB is connect\yed to the TV, popup window appe\yars\b Then you can s\yelect Media P\bay\b ¦Co\f\fecti\fg to the PC through \fetwork You can play pictures, music and video\ys saved on your PC \ythrough a network con\ynection in the Media P\bay mode\b ✎I\f you use Media P \bay through saved \file on your PC, you should download “PC Share Manager” and users manual \from “www\bsamsung\bcom\b” 1. For more in\formation on ho\yw to configure your network, re\fer to “Network Co\ynnection\b” (p\b 25)\b – Y ou are recommended to locat\ye both TV and PC in\y same subnet\b The fi\yrst 3 parts o\f the \ysubnet address o\f the TV and the PC IP addresses should be the\y same and only the \ylast part (the hos\yt address) should be chan\yged\b (e\bg\b IP Address: 123\b456\b789\b**) 2. Using a LAN cable,\y connect between t\yhe external modem and the P\yC onto which the Sa\ymsung PC Share Manager programme will be in\ystalled\b – Y ou can connect the\y TV to the PC directly without conne\ycting it through a Sharer (Router)\b Enjoy photos, music \yand/or movie files s\yaved on a USB Mass Storage \yClass (MSC) device \yand/or your PC\b LAN Cable LAN Cable LAN Cable LAN Cable Modem CablePC External Modem (ADSL/VDSL/Cable TV\y) LAN Samsung Wireless LAN Adapter Wireless IP Sharer TV Rear Panel or MEDIA.P USB Drive TV Rear Panel (HDD) or SUM Change Device View Devices E Enter R Return MediaPlay Videos [UC6000-XU]BN68-02748D-01Eng.indb 322010-04-01 오후 7:23:46
33English 04 Adva\fced Features ✎No supported \functions when connecting to the PC through network: xThe Backgrou\fd Music and Backgrou\fd Music Setti\fg \functions\b xSorting \files by pre\ference in the Photos , Music, and Videos \folders\b xThe � (REW) or µ (FF) button while a movie is playing\b ✎The Divx DRM, Multi-audio, embedded caption does not supported\b ✎Samsung PC Share manager should be permitted by the \firewall programme on your PC\b ✎When you use Media P\bay mode through a network connection, According to \functions o\f the provided server: xThe sorting method may vary\b xThe scene search \function may not be supported\b xThe P\bay Co\fti\fuous\by \function, which resumes playing o\f a video, may not be supported\b – The P\bay Co\fti\fuous\by \function does not \ysupport multiple u\ysers\b (It will have\y only memorised the\y point where the most recent user stopped \yplaying\b) xThe ◄ or ► button may not work depending on the content in\formation\b xYou may experience \file stuttering while playing a video in Media Play through a network connection\b ✎It might not work properly with unlicenced multimedia \files\b ✎Need-to-Know List be\fore using Media P\bay xMTP (Media Trans\fer Protocol) is not supported\b xThe \file system supports FAT16, FAT32 and NTFS\b xCertain types o\f USB Digital camera and audio devices may not be compatible with this T V\b xMedia Play only supports USB Mass Storage Class (MSC) devices\b MSC is a Mass Storage Class Bulk-Only Transport device\b Examples o\f MSC are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not supported)\b Devices should be connected directly to the T V’s USB port\b xBe\fore connecting your device to the T V, please back up your \files to prevent them \from damage or loss o\f data\b SAMSUNG is not responsible \for any data \file damage or data loss\b xConnect a USB HDD to the dedicated port, USB 1 (HDD) port\b xDo not disconnect the USB device while it is loading\b xThe higher the resolution o\f the image, the longer it takes to display on the screen\b xThe maximum supported JPEG resolution is 15360X8640 pixels\b xFor unsupported or corrupted \files, the “Not Supported File Format” message is displayed\b xI\f the \files are sorted by Basic View, up to 1000 \files can be displayed in each \folder\b xMP3 \files with DRM that have been downloaded \from a non-\free site cannot be played\b Digital Rights Management (DRM) is a technology that supports the creation o\f content, the distribution and management o\f the content in an integrated and comprehensive way, including the protection o\f the rights and interests o\f the content providers, the prevention o\f the illegal copying o\f contents, as well as managing billings and settlements\b xI\f more than 2 PTP devices are connected, you can only use one at a time\b xI\f more than two MSC devices are connected, some o\f them may not be recognized\b A USB device that requires high power (more than 500mA or 5V) may not be supported\b xI\f an over-power warning message is displayed while you are connecting or using a USB device, the device may not be recognized or may mal\function\b xI\f the T V has been no input during time set in Auto Protectio\f Time , t he Screensaver will run\b xThe power-saving mode o\f some external hard disk drives may be released automatically when connected to the T V\b xI\f a USB extension cable is used, the USB device may not be recognized or the \files on the device may not be read\b xI\f a USB device connected to the T V is not recognized, the list o\f \files on the device is corrupted or a \file in the list is not played, connect the USB device to the PC, \format the device and check the connection\b xI\f a \file deleted \from the PC is still \found when Media Play is run, use the “Empty the Recycle Bin” \function on the PC to permanently delete the \file\b [UC6000-XU]BN68-02748D-01Eng.indb 332010-04-01 오후 7:23:46
34English Ad\fanced Features ¦Scree\f Disp\bay Move to the file you\y desired using the up/dow\yn/right/le\ft button\ys and then press the ENTERE or � (Play) button\b The\y file is played\b ✎Supports the View Devices and Home in Media P\bay homepage\b Videos P\bayi\fg Video 1. Pr ess the ◄ or ► button to select \yVideos, then press the ENTER E button in the Media P\bay menu\b 2. Pr ess the ◄/►/▲/▼ button to select \ythe desired file in the file l\yist\b 3. Press the ENTER E button or � (Play) button\b – The selected file is\y displayed on the to\yp with its playing \ytime\b – I\f video time in\form\yation is unknown, \yplay time and pr ogress bar are not displayed\b – During playing the \yvideo, you can sear\y ch using the ◄ and ► button\b ✎In this mode, you can enjoy movie clips contained on a Game, but you cannot play the Game itsel\f\b ySupported Subtitle F\yormats Name Fi\be exte\fsio\fFormat MPEG-4 time-based te\yxt \bttxtXML SAMI \bsmiHTML SubRip \bsrtstring-based SubViewer \bsubstring-based Micro DVD \bsub or \btxtstring-based Jan.10.2010 Jan.10.2010 Jan.10.2010 Jan.10.2010 Jan.10.2010 Jan.10.2010 Jan.10.2010 Jan.10.2010 Jan.10.2010 Jan.10.2010 /Movie 01.avi 1/1 Movie 01.avi SUM Movie 03.avi Movie 05.avi Movie 07.avi Movie 0\f.avi Movie 02.avi Movie 04.avi Movie 06.avi Movie 08.avi Movie 10.aviIn\formation: You can ascertain the selected file name and the number o\f files and page\b Sort List Section: Displays sorting standard\b ✎Sorting standard is di\f\ferent depending on the contents\b Operation Buttons Red (Cha\fge D evice): Selects a connected device\bB Green ( Prefere\fce ): Sets the file pre\ference\b (not supported in Basic view) Yellow (Se\bect): Selects multiple files \from file list\b Selected files are marked with a symbol\b Blue (Sorti\fg ): Selects the sort list\bT Too\bs : Displays the option menu\b ✎Using the � (REW) or µ (FF) button, file list can move to next or previous page\b File List Section: You can confirm the files and groups that is sorted by each category\b VideosPage Change Device Select Sorting T Tools Movie 01.avi 00:04:03 / 00:07:3\ 8 1/1 SUME Chaptering L Jump T Tools R Return [UC6000-XU]BN68-02748D-01Eng.indb 342010-04-01 오후 7:23:48
35English 04 Adva\fced Features ySupported V ideo Formats Fi\be Exte\fsio\f Co\ftai\fer V ideo CodecReso\butio\fFrame rate (fps)Bit rate (Mbps)Audio Codec *\bavi *\bmkv AVI MKV Divx 3\b11 / 4\bx / 5\y\b1 / 6\b0 1920x1080 6 ~ 30 8 MP3 / AC3 / LPCM /\y ADPCM / DTS Core XviD 1920x1080 6 ~ 30 8 H\b264 BP / MP / HP 1920x1080 6 ~ 30 25 MPEG4 SP / ASP 1920x1080 6 ~ 30 8 Motion JPEG 800x600 6 ~ 30 8 *\bas\f ASFDivx 3\b11 / 4\bx / 5\y\b1 / 6\b0 1920x1080 6 ~ 30 8 MP3 / AC3 / LPCM /\y ADPCM / WMA XviD 1920x1080 6 ~ 30 8 H\b264 BP / MP / HP 1920x1080 6 ~ 30 25 MPEG4 SP / ASP 1920x1080 6 ~ 30 8 Motion JPEG 800x600 6 ~ 30 8 *\bwmv ASF Window Media Video v9 1920x1080 6 ~ 30 25 WMA *\bmp4 MP4 H\b264 BP / MP / HP 1920x1080 6 ~ 30 25 MP3 / ADPCM / AAC\y MPEG4 SP / ASP 1920x1080 6 ~ 30 8 XVID 1920x1080 6 ~ 30 8 *\b3gp 3GPP H\b264 BP / MP / HP 1920x1080 6 ~ 30 25 ADPCM / AAC / HE-AA\yC MPEG4 SP / ASP 1920x1080 6 ~ 30 8 *\bvro VRO VOB MPEG1 1920x1080 24 / 25 / 30 30 AC3 / MPEG / LPCM MPEG2 1920x1080 24 / 25 / 30 30 *\bmpg *\bmpeg PS MPEG1 1920x1080 24 / 25 / 30 30 AC3 / MPEG / LPCM /\y AAC MPEG2 1920x1080 24 / 25 / 30 30 H\b264 1920x1080 6 ~ 30 25 *\bts *\btp *\btrp TS MPEG2 1920x1080 24 / 25 / 30 30 AC3 / AAC / MP3 / \yDD+ / HE-AAC H\b264 1920x1080 6 ~ 30 25 VC1 1920x1080 6 ~ 30 25 Other Restrictio\fs ✎NOTE xI\f there are problems with the contents o\f a codec, the codec will not be supported\b xI\f the in\formation \for a Container is incorrect and the \file is in error, the Container will not be able to play correctly\b xSound or video may not work i\f the contents have a standard bitrate/\frame rate above the compatible Frame/sec listed in the table above\b xI\f the Index Table is in error, the Seek (Jump) \function is not supported\b Video Decoder Audio Decoder • S upports up to H\b264, Level 4\b1 • H \b264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported\b • X VID, MPEG4 SP, ASP : – Below 1280 x 720: \y60 \frame max – Above 1280 x 720: \y30 \frame max• GMC 2 over is not supported\b • H \b263 is not supported\b • O nly Samsung Techwin MJPEG is supported\b • S upports up to WMA 7, 8, 9, STD • W MA 9 PRO does not support 2 channel excess multi channel or lossless audio\b • W MA sampling rate 22050Hz mono is not supported\b [UC6000-XU]BN68-02748D-01Eng.indb 352010-04-01 오후 7:23:48
36English Ad\fanced Features P\bayi\fg movie fi\be co\fti\fuous\by (Resume P\bay) I\f you exit the pla\yying V ideos \function, it \ycan be played later\y \from the point where it was stopped\b ✎I\f you press the ENTERE button (Chapteri\fg ) during playing the \file, you can explore scene divided into 5 chapters you want\b ✎I\f the index in\formation is damaged or unsupported, you will not be able to use the Chapteri\fg \function\b 1. Select the movie fil\ye you want to play \ycontinuously by pressing the ◄ or ► button to select \yit \from the file list se\yction\b 2. Press the � (Play) / ENTERE button\b 3. Select P\bay Co\fti\fuous\by (Resume Play) by p\yressing the Blue button\b The Movie w\yill begin to play \f\yrom where it was stopped\b ✎The Blue button is available when resuming play\b ✎I\f the Co\ft. movie p\bay he\bp \function is set to O\f in the S etti\fgs menu, a pop-up message will appear when you resume play a movie \file\b Music P\bayi\fg Music 1. Pr ess the ◄ or ► button to select \yMusic, then press the ENTER E button in the Media P\bay menu\b 2. Press the ◄/►/▲/▼ button to select \ythe desired file in the file list\b 3. Press the ENTER E button or � (Play) button\b – During playing the \ymusic, you can sear\y ch using the ◄ and ► button\b –� (REW) and µ (FF) buttons do no\yt \function during p\ylay\b ✎Only displays the \files with MP3 and PCM \file extension\b Other \file extensions are not displayed, even i\f they are saved on the same USB device\b ✎I\f the sound is strange when playing MP3 \files, adjust the Equa\bizer in the Sou\fd menu\b (An over-modulated MP3 \file may cause a sound problem\b) ✎You can create My P\bay\bist selecting the desired music in the \file, and can play My P\bay\bist\b Photos Viewi\fg a Photo (or S\bide Show) 1. Pr ess the ◄ or ► button to select \yPhotos, then press the ENTER E button in the Media P\bay menu\b 2. Press the ◄/►/▲/▼ button to select \ythe desired file in the file list\b 3. Press the ENTER E button or � (Play) button\b – While a photo list\y is displayed, pr ess the � (Play) / ENTERE button on the remote control to start slide s\yhow\b – All files in the fil\ye list section wil\yl be displayed in th\ye slide show \b – During the slide sh\yow , files are displayed in order \from currently being shown\b ✎Music \files can be automatically played during the Slide Show i\f the Backgrou\fd Music is set to O\f \b ✎The BGM Mode cannot be changed until the BGM has \finished l oading\b Movie 01.avi 00:04:03 / 00:07:3\ 8 1/1 SUM Play continuously E Chaptering L Jump T Tools R Return Resumes playing from the last viewed scene. Play continuously 3/15I Love you Jhon Music 1No SingerMusic \fNo SingerMusic 3No SingerMusic 4No SingerMusic 5No Singer I Love You Jhon 1st A\bbum Pop \f010 4.\fMB 01:10 / 04:0\f SUME Pause L Jump T Tools R Return Playlist Image1024.jpg 1024x768 2010/2/1 3/1\f SUME Pause L Previous/Next T Tools R Return Normal [UC6000-XU]BN68-02748D-01Eng.indb 362010-04-01 오후 7:23:50
37English 04 Adva\fced Features ¦P\bayi\fg the Mu\btip\be Fi\bes P\bayi\fg the se\bected video/music/photo fi\bes 1. Pr ess the Yellow button in th\ye file list to sele\yct the desired file\b 2. Repeat the above o\yperation to select\y multiple files\b ✎NOTE xThe c mark appears to the le\ft o\f the selected \files\b xTo cancel a selection, press the Yellow button again\b xTo deselect all selected \files, press the TOOLS button and select Dese\bect A\b\b\b 3. Press the TOOLS button and select \yP\bay Se\bected Co\fte\fts\b P\bayi\fg the video/music/photo fi\be group 1. While a file list i\ys displayed, move to\y the any file in des\yired group\b 2. Press the TOOLS button and select \yP\bay Curre\ft Group\b ¦Media P\bay Additio\fa\b Fu\fctio\f Sorti\fg the fi\be \bist Pr ess the Blue butto\yn in the file list \yto sort the files\b Category Operatio\fsVideos Music Photos Basic ViewIt shows whole \folder\b You can view the photo by selecting the \folder\b> > > Tit\beIt sorts and displays the file title in Symbol/Number/Alphabet/Special order\b> > > Prefere\fceIt sorts and displays the file by pre\ference\b You can change the file pre\ference in the file list section using the Green button\b> > > Latest Date It sorts and shows files by latest date\b> > Ear\biest Date It sorts and shows files by earliest date\b> > Artist It sorts the music file by artist in alphabetical\b> A\bbumIt sorts the music file by album in alphabetical order\b> Ge\freIt sorts music files by the genre\b> MoodIt sorts music files by the mood\b You can change the music mood in\formation\b> Mo\fth\byIt sorts and shows photo files by month\b It sorts only by month (\from January to December) regardless o\f year\b> 1/1/Movie 01.avi SUM Movie 01.avi Jan.10.2010 Jan.10.2010 Jan.10.2010 Jan.10.2010 Jan.10.2010 Jan.10.2010 Jan.10.2010 Jan.10.2010 Jan.10.2010 Jan.10.2010 Movie 03.avi Movie 05.avi Movie 07.avi Movie 0\f.avi Movie 02.avi Movie 04.avi Movie 06.avi Movie 08.avi Movie 10.avi Change Device Select Sorting T Tools Videos 2 files selected Page [UC6000-XU]BN68-02748D-01Eng.indb 372010-04-01 오후 7:23:52
38English Ad\fanced Features Videos/Music/Photos P\bay Optio\f me\fu During playing a fil\ye, pr ess the TOOLS button\b Category Operatio\fsVideos Music Photos Tit\be You can move the other file directly\b > Repeat ModeYou can play recorded, movie and music files repeatedly\b> > Picture SizeYou can adjust the picture size \for pre\ference\b> Picture Setti\fgYou can adjust the picture setting\b (p\b 15, 16, 17, 18)>> Sou\fd Setti\fg You can adjust the sound setting\b (p\b 18, 19, 20)> > > Subtit\be Setti\fgYou can play the video file with subtitles\b This \function only works i\f the subtitles are the same file name as the video file\b> AudioYou can enjoy video in one o\f supported languages as required\b The \function is only enabled when stream-type files which support multiple audio \formats are played\b> Stop S\bide Show / S tart S \bide S howYou can start or stop a slide show\b> S\bide Show S peedYou can select the slide show speed during the slide show\b> Backgrou\fd M usicYou can set and select background music when watching a slide show\b> Zoom You can zoom into images in \full screen mode\b> RotateYou can rotate images in \full screen mode\b> I\fformatio\fYou can see detailed in\formation about the played file\b> > > Setti\fgs Usi\fg the Setup Me\fu ■Co\ft. movie p\bay he\bp (Resume P\bay) (O\f / Off): Select to display \ythe help pop-up me\yssage \for continuou\ys movie playback\b ■ Get the DivX® VOD registratio\f code: Shows the registration code au\ythorized \for the TV\y\b I\f you connect to \ythe DivX web site and register the registration code wi\yth a personal acco\yunt, you can downlo\yad VOD registration file\b I\f\y you play the VOD registration using \yMedia Play, the registration is com\ypleted\b ✎For more in\formation on DivX® VOD, visit “www\bDivX\bcom\b” ■ Get the DivX® VOD deactivatio\f code: When DivX® VOD i\ys not registered, the registration deactiv\yation code is displayed\b I\f you exe\ycute this \function \ywhen DivX® VOD is \yregistered, the current DivX® VOD registration is deac\ytivated\b ■ I\fformatio\f : Select to view in\y\formation about the\y connected device\b [UC6000-XU]BN68-02748D-01Eng.indb 382010-04-01 오후 7:23:52
39English 04 Adva\fced FeaturesAnynet+ What is A\fy\fet+? t Anynet+ is a \functi\yon that enables you\y to control all connected Sa\ymsung devices that \ysupport Anynet+ wit\yh your Samsung TV’s remote\b The Anynet+ \ysystem can be used \yonly with Samsung de\yvices that have th\ye Anynet+ \feature\b To be sure your Samsung device has \ythis \feature, check i\f there is an Anynet+ log\yo on it\b To co\f\fect to Home Theatre 1. Connect the HDMI IN (1(DVI), 2, 3 or 4) jack on the TV a\ynd the HDMI OUT jac\yk o\f the corresponding Anynet+ de\yvice using an HDMI cabl\ye\b 2. Connect the HDMI I\yN jack o\f the home \ytheatre and the HDMI OUT \yjack o\f the corresponding Anynet+ de\yvice using an HDMI cable\b ✎NOTE xConnect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your T V and the Digital Audio Input o n the Home Theatre\b xWhen \following the connection above, the Optical jack only outputs 2 channel audio\b You will only hear sound \from the Home Theatre’s Front, Le\ft and Right speakers and the subwoo\fer\b I\f you want to hear 5\b1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (i\be\b Anynet Device 1 or 2) directly to the Ampli\fier or Home Theatre, not the T V\b xConnect only one Home Theatre\b xYou can connect an Anynet+ device using the HDMI cable\b Some HDMI cables may not support Anynet+ \functions\b xAnynet+ works when the AV device supporting Anynet+ is in the standby or on status\b xAnynet+ supports up to 12 AV devices in total\b Note that you can connect up to 3 devices o\f the same type\b TV Rear Panel Home TheatreAnynet+ Device 1 Anynet+ Device 2, 3, 4 HDMI Cable HDMI Cable HDMI Cable Optical Cable [UC6000-XU]BN68-02748D-01Eng.indb 392010-04-01 오후 7:23:53
40English Ad\fanced Features A\fy\fet+ Me\fu The Anynet+ menu ch\yanges depending on \ythe type and status\y o\f the Anynet+ devi\yces connected to th\ye TV \b A\fy\fet+ Me\fu Descriptio\f V iew TV Changes Anynet+ mod\ye to TV broadcast mode\b Device List Shows the Anynet+ de\yvice list\b (device_name) MENU Shows the connected\y device menus\b E\bg\b I\y\f a DVD recorder is connected, t\yhe disc menu o\f the DVD recorder will appear\b (device_name) INFO Shows the play menu\y o\f the connected de\yvice\b E\bg\b I\f a DVD r\yecorder is connected, t\yhe play menu o\f the DV\yD recorder will appear\b Recordi\fg: (*recorder) Starts recording immediately usi\yng the recorder\b (This is only ava\yilable \for devices \ythat support the recording \function\b) Stop Recordi\fg: (*recorder) Stops recording\b Receiver Sound is played through the receiver\b I\f more than one recording device is conn\yected, they are displayed as (*recorder) and i\f only one\y recording device is connected, it will \ybe represented as (*device\y_name)\b ¦ Setti\fg Up A\fy\fet+ ■Setup A\fy\fet+ (HDMI-CEC) (Off / O\f): To use the Anynet+ F\yunction, A\fy\fet+ (HDMI-CEC) must be set to O\f\b ✎When the A\fy\fet+ (HDMI-CEC) \function is disabled, all the Anynet+ related operations are deactivated\b Auto Tur\f Off (No / Yes): Setting an Anynet\y+ Device to turn o\f\f automatically whe\yn the TV is turned o\f\f\b ✎The active source on the T V must be set to T V to use the Anynet+ \function\b ✎Even i\f an external device is still recording, it may turn o\f\f\b ¦Switchi\fg betwee\f A\fy\fet+ Devices 1. Anynet+ devices con\ynected to the TV ar\ye listed\b ✎I\f you cannot \find a device you want, press the Red button to re\fresh the list\b 2. Select a device and \ypress the ENTER E button\b You can switch to t\yhe selected device\b ✎Only when you set A\fy\fet+ (HDMI-CEC) to O\f in the App\bicatio\f menu, the Device List menu appears\b xSwitching to the selected device may take up to 2 minutes\b You cannot cancel the operation during the switching operation\b xI\f you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ \function\b Make sure to switch to an Anynet+ device by using the Device List\b ¦Recordi\fg You can make a recording o\f a TV Programme using a Sam\ysung recorder\b 1. Select Recordi\fg\b ✎When there are more than two recording devices xWhen multiple recording devices are connected, the recording devices are listed\b Select one recording device in the Device List\b ✎When the recording device is not displayed, select Device List and press the Red button to search devices\b 2. Pr ess the EXIT button to exit\b ✎You can record the source streams by selecting Recordi\fg : (device_name)\b ✎Pressing the � (REC) button will record whatever you are currently watching\b I\f you are watching video \from another device, the video \from the device is recorded\b ✎Be\fore recording, check whether the antenna jack is properly connected to the recording device\b To properly connect an antenna to a recording device, re\fer to the recording device’s users manual\b [UC6000-XU]BN68-02748D-01Eng.indb 402010-04-01 오후 7:23:53