Samsung UE 40C6000 User Manual
Have a look at the manual Samsung UE 40C6000 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
21English 03 Basic Features ✎I\f a \folder name is too long, the \folder cannot be selected\b ✎Each USB you use is assigned its own \folder\b When using more than one o\f the same type o\f USB, make sure the \folders assigned to each USB have di\f\ferent names\b Repeat: Select O\fce, Everyday, Mo\f~Fri, Mo\f~Sat, Sat~Su\f or Ma\fua\b to set at you conv\yenience\b I\f you select Ma\fua\b, you can set up th\ye day you want to activate the timer\y\b ✎The c mark indicates the day is selected\b ✎Auto Power O\f\f (available only when the T V is turned on by Timer): The T V will be automatically turned o\f\f a\fter 3 hours o\f being le\ft idle to prevent overheating\b ¦ Locki\fg Programmes Security ✎The PIN input screen appears be\fore the setup screen\b ✎Enter your 4-digit PIN, the de\fault o\f which is “0-0-0-0”\b Change the PIN using the Cha\fge PIN option\b ■Chi\bd Lock (Off / O\f): Lock channels in\y Cha\f\fe\b Ma\fager , to prevent unauthorized \yusers, such as children, \from watching unsuit\yable programme\b ✎Available only when the I\fput source is set to T V \b ■Par e\fta\b Lock (depending on the \ycountry): Prevent unauthorized users,\y such as children, \from watching unsuitable programme with a use\yr-defined 4-digit PIN \y code\b I\f selected ch\yannel is locked, th\ye “ \” symbol will be displayed\b A\b\bow A\b\b: Unlock All TV ra\ytings\b ■ Cha\fge PIN: Change your perso\ynal ID number required to set up the TV\b ✎I\f you \forget the PIN code, press the remote control buttons in the \following sequence, which resets the PIN to “0-0-0-0”: POWER (o\f\f) → MUTE → 8 → 2 → 4 → POWER (on)\b ¦ Other Features La\fguage ■Me\fu La\fguage: Set the menu lang\yuage\b ■T e\betext La\fguage: Set a desired language \for tel\yetext\b ✎English is the de\fault in cases where the selected language is unavailable in the broadcast\b ■Pr efere\fce (Primary Audio La\fguage / Seco\fdary Audio La\fguage / Primary Subtit\be La\fguage / Seco\fdary Subtit\be La\fguage / Primary Te\betext La\fguage / Seco\fdary Te\betext La\fguage) : Select a language\y, which will be th\ye de\fault language when a ch\yannel is selected\b \y Subtit\be Use this menu to s\yet the Subtit\be mode\b ■ Subtit\be (Off / O\f): Switches subtitle\ys on or o\f\f\b ■ Mode (Norma\b / Heari\fg Impaired): Sets the subtitle m\yode\b ■ Subtit\be La\fguage: Sets the subtitle\y language\b ✎I\f the programme you are watching does not support the Heari\fg Impaired \function, Norma\b automatically activates even i\f the Heari\fg Impaired mode is selected\b ✎English is the de\fault in cases where the selected language is unavailable in the broadcast\b Digita\b Text (Disab\be / E\fab\be) I\f the programme broadcasts with digit\yal text, this \featu\yre is enabled\b ✎MHEG (Mu\btimedia a\fd Hypermedia I\fformatio\f Codi\fg Experts Group) An International standard \for data encoding \ysystems used in multimedia \yand hypermedia\b This\y is at a higher level than the MPEG\y system which inclu\ydes data-linking hypermedia such as \ystill images, char\yacter service, animation, graphic\y and video files as \ywell as multimedia \y data\b MHEG is user r\yuntime interaction\y technology and is being applie\yd to various fields \yincluding VOD (Video-On-Demand), IT\yV (Interactive TV)\y, EC (Electronic Commerce), tele-education\y, tele-con\ferencing, digital libraries and netwo\yrk games\b Network (Network Type / Network Setup / Network Test / SWL(Samsu\fg Wire\bess Li\fk) / SWL co\f\fect) For details on sett\ying up options, re\fer to the “Networ\yk Connection” instru\yctions (p\b 25)\b SUBT. [UC6000-XU]BN68-02748D-01Eng.indb 212010-04-01 오후 7:23:37
22English Basic Features Ge\fera\b ■Game Mode (Off / O\f): When connecting \yto a game console such as Pl\yayStation™ or Xbox™\y, you can enjoy a more realistic gaming ex\yperience by selecti\yng game mode\b ✎NOTE xPrecautions and limitations \for game mode – T o disconnect the ga\yme console and conn\yect another external device, set Game Mode to Off in the setup menu\b – I\f you display the T\yV menu in Game Mode, the screen shakes slightl\yy\b xGame Mode is not available when the input source i s set to T V or PC\b xA\fter connecting the game console, set Game Mode t o O\f \b Un\fortunately, you may notice reduced picture quality\b xI\f Game Mode is O\f : –Pictur e mode is set to Sta\fdard and Sou\fd mode is set to Movie\b – Equa\bizer is not available\b ■BD Wise (Off / O\f): Provides the optimal \ypicture quality \for Samsung DVD, Bl\yu-ray and Home Thea\ytre products which support BD Wise\b When BD Wise is turned O\f, the picture mode is automatic\yally changed to the\y optimal resolution\b ✎Available when connecting Samsung products that support BD Wise through a HDMI cable\b ■Me\fu Tra\fspare\fcy (Bright / Dark): Set the Transparency o\f the menu\b ■ Me\body (Off / Low / Medium / High): Set so that a melody plays when th\ye TV is turned on or o\f\f\b Commo\f I\fterface ■ CI Me\fu: This enables the\y user to select \from the CAM- provided menu\b Select \ythe CI Menu based o\yn the menu PC Card\b ■ App\bicatio\f I\ffo: View in\formation on \ythe CAM inserted into the CI slot a\ynd on the “CI or CI\y+ CARD” which is inserted into the C\yAM\b You can install the\y CAM anytime whether the TV is \yon or o\f\f\b 1. Purchase a CI CAM modu\yle at your nearest dealer or by phone\b 2. Firmly insert the “\yCI or CI+ CARD” in\yto the CAM in the \y direction o\f the arrow\b 3. Insert the CAM wit\yh the “CI or CI+ C\yARD” into the common inter\face sl\yot, in the direction o\f the arrow so that it aligns par\yallel with the slo\yt\b 4. Check i\f you can se\ye a picture on a scrambled si\ygnal channel\b Wire\bess Remote Co\ftro\b Turn wireless remote controls on or o\f\f or give permissio\yn to wireless remote controls\b ¦Picture I\f Picture (PIP) PIP t You can watch the T\yV tuner and one ext\yernal video source simultaneously\b PIP (Picture-in-Picture) does not \functio\yn in the same mode\b ✎NOTE xFor PIP sound, re\fer to the Sou\fd Se\bect i nstructions\b xI\f you turn the T V o\f\f while watching in PIP mode, the PIP window will disappear\b xYou may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke\b xWhile I\fter\fet@T V is in operation, the PIP \function cannot be used\b xPIP settings Mai\f picture Sub picture Compo\fe\ft, HDMI1/DVI, HDMI2, HDMI3, HDMI4, PC TV ■ PIP (Off / O\f): Activate or deact\yivate the PIP \funct\yion\b ■Cha\f\fe\b : Select the channe\yl \for the sub-screen\b ■Size ( Õ / Ã): Select a size \for\y the sub-picture\b ■ Positio\f ( à / – / — / œ): Select a position\y \for the sub-picture\b ■ Sou\fd Se\bect (Mai\f / Sub): You can choose the \y desired sound (Mai\f / Sub) in PIP mode\b [UC6000-XU]BN68-02748D-01Eng.indb 222010-04-01 오후 7:23:38
23English 03 Basic FeaturesSupport Menu Se\bf Diag\fosis ✎Sel\f Diagnostic might take \few seconds, this is part o\f the normal operation o\f the T V\b ■Pictur e Test (Yes / No): Use to check \for \ypicture problems\b ■ Sou\fd Test (Yes / No): Use the built-in\y melody sound to check \for sound problems\b ✎I\f you hear no sound \from the T V’s speakers, be\fore per\forming the sound test, make sure Speaker Se\bect is set to T V Speaker in the Sou\fd menu\b ✎The melody will be heard during the test even i\f Speaker Se\bect is set to Exter\fa\b Speaker or the sound is muted by pressing the MUTE button\b ■ Sig\fa\b I\fformatio\f: (digital channels\y only) HDTV channel’s reception quality is\y either per\fect or \ythe channels are unavailable\b Adju\yst your antenna to \y increase signal strength\b ■ T roub\beshooti\fg: I\f the TV seems t\yo have a problem, re\fer to this descri\yption\b ✎I\f none o\f these troubleshooting tips apply, contact the Samsung customer service centre\b Software Upgrade Software Upgrade can be per\formed v\yia a broadcasting signal or by networ\yk connection or dow\ynloading the latest\y firmwar e \from “www\bsamsung\bcom,” to a\y USB memory device\b Curre\ft Versio\f the so\ftware already installed in th\ye TV\b ✎So\ftware is represented as “Year/Month/Day_Version”\b I\fsta\b\bi\fg the Latest Versio\f ■By USB: Insert a USB drive containing th\ye firmware upgrade file, downloaded \from “www\bsamsung\bcom,” into the TV\b Please be care\ful not to disconnect the powe\yr or remove the USB drive until upgrade\ys are complete\b The TV wi\yll be turned o\f\f and on automatica\ylly a\fter completing th\ye firmware upgrade\b When so\ft\yware is upgraded, video and \yaudio settings you \yhave made will return to their de\fault \ysettings\b We advise you to to \ywrite down your settings \yso that you can eas\yily reset them a\fter the upgrade\b ■ By O\f\bi\fe: Upgrade the so\ftw\yare using the Internet\b ✎First, con\figure your network\b For detailed procedures on using the Network Setup, re\fer to the “Network Connection” instructions\b ✎I\f the internet connection doesn’t operate properly, the connection may be broken\b Please retry downloading\b I\f the problem persists, download by USB and upgrade\b ■By Cha\f\fe\b: Upgrade the so\ftw\yare using the broadcasting signal\b ✎I\f the \function is selected during the so\ftware transmission period, so\ftware will be automatically searched and downloaded\b ✎The time required to download the so\ftware is determined by the signal status\b ■ Sta\fdby Mode Upgrade: A manual upgrade \ywill be automatically per\fo\yrmed at selected ti\yme\b Since the power o\f the unit i\ys turned on internally, the screen may be turned on slightly \for \ythe LED product\b This phenomenon may cont\yinue \for more than 1 hour unti\yl the so\ftware upgrade is comple\yte\b ■ A\bter \fative Software (backup): Displays\y the so\ftware version downloaded t\yhrough By O\f\bi\fe\b During the so\ftware upgrading, When t\yhe Upgrade will dis\ycontinue \from last step, this\y \function be activa\yted\b HD Co\f\fectio\f Guide Re\fer to this in\for\ymation when connec\yting external devices to the TV\b Co\ftact Samsu\fg View this in\formatio\yn when your TV does\y not work properly or when you want to\y upgrade the so\ftwa\yre\b You can find in\formation regarding our call centr\yes, and how to down\yload products and so\ftware\b Software Upgrade By USB ► By Online By Channel Standby Mode Upgrade : 45 Min Alternative Software 2010/01/15_00000 U Move E Enter R Return Current Version 2010/01/18_000001 USB Drive TV Rear Panel (HDD) or [UC6000-XU]BN68-02748D-01Eng.indb 232010-04-01 오후 7:23:38
24English Ad\fanced Features Connecting to a PC Usi\fg a\f HDMI/DVI Cab\be / a D-sub Cab\be AUDIO OUT PC OUT AUDIO OUT DVI OUT Disp\bay Modes (D-Sub a\fd HDMI/DVI I\fput) Optimal r esolution is 1920 \yX 1080 @ 60 Hz\b Mode Reso\butio\fHorizo\fta\b Freque\fcy (KHz)V ertica\b Freque\fcy (Hz)Pixe\b C\bock Freque\fcy (MHz) Sy\fc Po\barity (H / V) IBM 640 x 350 720 x 400 31\b469 31\b469 70\b086 70\b087 25\b175 28\b322+/- -/+ MAC 640 x 480 832 x 624 1152 x 870 35\b000 49\b726 68\b681 66\b667 74\b551 75\b062 30\b240 57\b284 100\b000 -/- -/- -/- VESA CVT 720 x 576 1152 x 864 1280 x 720 1280 x 960 35\b910 53\b783 56\b456 75\b231 59\b950 59\b959 74\b777 74\b857 32\b750 81\b750 95\b750 130\b000 -/+ -/+ -/+ -/+ VESA DMT 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768 1152 x 864 1280 x 1024 1280 x 1024 1280 x 720 1280 x 800 1280 x 800 1280 x 960 1360 x 768 1440 x 900 1440 x 900 1600 x 1200 1680 x 1050 31\b469 37\b861 37\b500 37\b879 48\b077 46\b875 48\b363 56\b476 60\b023 67\b500 63\b981 79\b976 45\b000 49\b702 62\b795 60\b000 47\b712 55\b935 70\b635 75\b000 65\b290 59\b940 72\b809 75\b000 60\b317 72\b188 75\b000 60\b004 70\b069 75\b029 75\b000 60\b020 75\b025 60\b000 59\b810 74\b934 60\b000 60\b015 59\b887 74\b984 60\b000 59\b95425\b175 31\b500 31\b500 40\b000 50\b000 49\b500 65\b000 75\b000 78\b750 108\b000 108\b000 135\b000 74\b250 83\b500 106\b500 108\b000 85\b500 106\b500 136\b750 162\b000 146\b250 -/- -/- -/- +/+ +/+ +/+ -/- -/- +/+ +/+ +/+ +/+ +/+ -/+ -/+ +/+ +/+ -/+ -/+ +/+ -/+ VESA GTF 1280 x 720 1280 x 1024 52\b500 74\b620 70\b000 70\b00089\b040 128\b943 -/+ -/- VESA DMT / DTV CEA1920 x 1080p 67\b500 60\b000148\b500 +/+ ✎NOTE xFor HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack\b xThe interlace mode is not supported\b xThe set might operate abnormally i\f a non-standard video \format is selected\b xSeparate and Composite modes are supported\b SOG(Sync On Green) is not supported\b [UC6000-XU]BN68-02748D-01Eng.indb 242010-04-01 오후 7:23:39
25English 04 Adva\fced FeaturesNetwork Connection\h You can set up your \yTV so that it can \yaccess the Internet through your local area network (LAN) u\ysing a wired or wireless connection\b ¦Co\f\fecti\fg to a Wired Network You can attach your \yTV to your LAN usin\yg cable in three ways: yY ou can attach your \yTV to your LAN by c\yonnecting the LAN \yport on the back o\y\f your TV to an ext\yernal modem using a C\yat 5 cable\b See the dia\ygram below\b y You can attach your \yTV to your LAN by c\yonnecting the LAN \yport on the back o\y\f your TV to a IP Sh\yarer which is connec\yted to an external modem\b Use Cat \y5 cable \for the con\ynection\b See the dia\ygram below\b y Depending on how yo\yur network is confi\ygur ed, you may be able \yto attach your TV t\yo your LAN by conne\ycting the LAN port on the back o\y\f your TV directly to a network \ywall outlet using \ya Cat 5 cable\b See \ythe diagram below\b Note that the wal\yl outlet is attached \yto a modem or router elsewhere in your house\b I\f you have a Dynami\yc Network, you shou\yld use an ADSL modem\y or router that support\ys Dynamic Host Confi\yguration Protocol (DHCP)\b Mode\yms and routers that suppor\yt DHCP automatical\yly provide the IP address, subnet mask, \ygateway, and DNS values your \yTV needs to access \ythe Internet so you don’t have to enter th\yem manually\b Most h\yome networks are Dynamic Networks\b Some networks require a Static IP address\b I\f your network\y requires a Static IP address, you must enter\y the IP address, subnet mask, gatew\yay, and DNS values m\yanually on your TV’\ys Cable Setup Screen when you set up\y the network connection\b To get the IP address, subnet mask, \ygateway, and DNS val\yues, contact your I\ynternet Service Provider (ISP)\b I\f you have a Windows computer, you can also get \ythese values through your computer\b ✎You can use ADSL modems that support DHCP i\f your network requires a Static IP address\b ADSL modems that support DHCP also let you use Static IP addresses\b The Modem Port on the Wall TV Rear Panel LAN Cable Modem Cable External Modem (ADSL / VDSL / Cabl\ye TV) IP Sharer (having DHCP serve\yr) The Modem Port on the Wall TV Rear Panel TV Rear Panel LAN Cable LAN Cable Modem Cable LAN Cable The LAN Port on the Wall External Modem (ADSL / VDSL / Cabl\ye TV) [UC6000-XU]BN68-02748D-01Eng.indb 252010-04-01 오후 7:23:41
26English Ad\fanced Features Network Setup (Auto) Use the Automatic \yNetwork Setup when connecting yo\yur TV to a network th\yat supports DHCP \b To set up your TV’s cable network conn\yection automatical\yly, \follow these st\yeps: How to set up automatica\b\by 1. Connect your TV to \yyour LAN as describ\yed in the previous section\b 2. Turn on your TV, press the MENU button on your remote, use the ▲ or ▼ button to select \ySetup, and then press the ENTER E button\b 3. Use the ▲ or ▼ button to select \yNetwork in the Setup menu, and then press the ENTER E button\b The Network screen appears\b 4. On the Network screen, select Network Type\b 5. Set Network Type to Wired\b 6. Select Network Setup\b The Network Setup screen appears\b 7. Set I\fter\fet Protoco\b Setup to Auto\b 8. Auto acquires and enters the n\yeeded Internet values automatically\b 9 When done, press the RETURN button on your remote\b 10. Select Network Test to check the Inte\yrnet connectivity\b 11. I\f the Network Function has not \yacquired the network connection values,\y go to the directions \for Ma\fua\b\b Network Setup (Ma\fua\b) Use the Manual Network Setup when connecting yo\yur TV to a network that r equires a Static IP address\b Getti\fg the Network Co\f\fectio\f Va\bues To get the Network \yconnection values \yon most Windows computers, \follow t\yhese steps: 1. Right click the Ne\ytwork icon on the \ybottom right o\f the\y screen\b 2. In the pop-up menu\y that appears, cli\yck Status\b 3. On the dialog that \yappears, click the\y Support tab\b 4. On the Support Tab, click the Deta\yils button\b The Network connection\y values are displayed\b How to set up ma\fua\b\by To set up your TV’s cable network co\ynnection manually, \y \follow these steps:\y 1. Follow Steps 1 through 6 in the “How\y to set up automatically” procedure\b 2. Set I\fter\fet Protoco\b Setup to Ma\fua\b\b 3. Press the ▼ button on your remote to go to the\y first entry field\b 4. Enter the IP Address, Sub\fet Mask, Gateway, and DNS Server values\b Use the nu\ymber buttons on you\yr remote to enter num\ybers and the arrow buttons to move\y \from one entry field t\yo another\b 5. When done, press the RETURN button on your remote\b 6. Select Network Test to check the Inte\yrnet connectivity\b Network Setup IP Address : Subnet Mask : Gateway : DNS : Auto DNS Server : U Move E Enter R Return Internet Protocol Setup : Auto ► Network U Move E Enter R Return Network Type : Wired ► Network Setup Network Test SWL(Samsung Wireless Link) : Of f SWL connect [UC6000-XU]BN68-02748D-01Eng.indb 262010-04-01 오후 7:23:42
27English 04 Adva\fced Features ¦Co\f\fecti\fg to a Wire\bess Network To connect your TV t\yo your network wirelessly, you need a \ywireless router or modem and \ya Samsung Wireless LAN Adapter (WIS09ABGN, WIS09AB\yGN2, WIS10ABGN), wh\yich you connect to \yyour TV’s back or side pane\yl USB jack\b See the \yillustration below\b Samsung’s Wireless LAN adapter i\ys sold separately a\ynd is o\f\fered by select retailers, Ecommerce sites and Samsun\ygparts\b com\b Samsung’s Wireless LAN adapter s\yupports the IEEE 802\b\y11A/B/G and N commu\ynication protocols\b Samsung recommends using IEEE \y802\b11N\b When you pl\yay the video over a\y IEEE 802\b11B/G conne\yction, the video ma\yy not play smoothly\b ✎NOTE xYou must use the “Samsung Wireless L AN Adapter” (WIS09ABGN, WIS09ABGN2, WIS10ABGN) to use a wireless network\b xSamsung’s Wireless L AN Adapter is sold separately\b The Samsung Wireless L AN Adapter is o\f\fered by select retailers, Ecommerce sites and Samsungparts\bcom\b xTo use a wireless network, your T V must be connected to a wireless IP sharer\b I\f the wireless IP sharer supports DHCP, your T V can use a DHCP or static IP address to connect to the wireless network\b xSelect a channel \for the wireless IP sharer that is not currently being used\b I\f the channel set \for the wireless IP sharer is currently being used by another device nearby, this will result in inter\ference and communication \failure\b xI\f you apply a security system other than the systems listed blow, it will not work with the T V\b xI\f Pure High-throughput (Green\field) 802\b11N mode is selected and the Encryption type is set to WEP, TKIP or TKIP- AES (WPS2Mixed) \for your AP, Samsung T Vs will not support a connection in compliance with new Wi-Fi certi\fication speci\fications\b xI\f your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button Con\figuration) or PIN (Personal Identi\fication Number)\b WPS will automatically con\figure the SSID and WPA key in either mode\b xI\f your router, modem, or device isn’t certi\fied, it may not connect to the T V via the “Samsung Wireless L AN Adapter\b” xCo\f\fectio\f Methods: Y ou can setup the wireless network connection six ways\b – Samsung Auto Configu\yration –PBC (WPS) – Auto Setup (Using t\yhe Auto Network Sea\yr ch \function) – Manual Setup –SWL(Samsu\fg Wire\bess Li\fk) –Ad-Hoc xThe Samsung Wireless L AN Adapter may not be recognized or work properly when connecting via a USB hub or via a USB extension cable other than the one available \from Samsung\b TV Rear Panel (HDD) The LAN Port on the Wall LAN CableWireless IP Sharer (AP having DHCP server) Samsung Wireless LAN Adapter or ✎To use the SWL(Samsu\fg W ire\bess L i\fk) \function, connect to the USB 1 ( HDD) port\b [UC6000-XU]BN68-02748D-01Eng.indb 272010-04-01 오후 7:23:42
28English Ad\fanced Features Notice The picture may appear corrup\yted or have static \y\for some channels w\yhen the TV is conn\yected to the Samsun\yg Wireless LAN Adapter\b In such a case, e\ystablish a connect\yion using one o\f th\ye \following methods\y or connect the Sam\ysung Wireless LAN Adapter using a USB\y cable in a place \ythat is not a\f\fected by radio inte\yr\ference\b Method 1Method 2 Connect using the \yUSB right angle ada\ypter Connect via an ext\yension cable ✎The Samsung Wireless L AN Adapter should be installed in an inter\ference-\free area in order to avoid inter\ference between the adapter and tuner\b Network Setup (Samsu\fg Auto Co\ffiguratio\f) This \function is av\yailable in APs (Ac\ycess Points) that \ysupport Auto Configuration\b \yI\f your AP does not,\y you can connect through PBC (WPS), auto, or manuall\yy\b ✎This \function is available when SWL(Samsu\fg Wire\bess Li\fkset to Off \b ✎You can check \for equipment that supports Samsung Auto Con\figuration on www\bsamsung\bcom\b How to set up usi\fg Samsu\fg Auto Co\ffiguratio\f 1. Place the AP and TV\y next to each othe\yr and turn them on\b ✎Because the booting times o\f applications di\f\fer, you may have to wait \for approximately 2 minutes\b ✎I\f the L AN cable connected the WAN port o\f AP during Samsung Auto Con\figuration, you are able to complete until internet connection test\b I\f you do not connect, Samsung Auto Con\figuration will check only device connecting o\f AP (Not check internet)\b 2. A\fter 2 minutes, co\ynnect the Samsung W\yireless LAN Adapter to the TV\b When the Samsung \yWireless LAN Adapter is establis\yhed, the pop-up win\ydow appears\b 3. As soon as a conne\yction is establish\yed, place the AP in\y parallel with the \ySamsung Wireless LAN Adapter g\yiving a gap no larger than\y 25cm\b 4. Wait until the conn\yection is automati\ycally established\b ✎I\f Samsung Auto Con\figuration does not connect your T V to your AP, a pop-up window appears on the screen noti\fying you o\f the \failure\b Reset the AP, and then try again\b I\f the connection \fails again, choose one o\f the other connection setup methods, PBC (WPS), auto, or manual\b 5. A\fter the connectio\yn is established, l\yocate the sharer at the desired location\b ✎I\f the AP settings have been changed or it is the \first time you use the new AP a\fter purchase, you need to set up again beginning \from Step 1\b Network Setup (PBC (WPS)) How to set up usi\fg PBC (WPS) I\f your r outer has a PBC (W\yPS) button, \follow \ythese steps: 1. Connect your TV to \yyour LAN as describ\yed in the previous section\b 2. Turn on your TV, press the MENU button on your remote, use the ▲ or ▼ button to select \ySetup, and then press the ENTER E button\b 3. Use the ▲ or ▼ button to select \yNetwork in the Setup menu, and then press the ENTER E button\b 4. On the Network screen, select Network Type\b 5. Set Network Type to Wire\bess\b 6. Select Network Setup\b The Network Setup screen appears\b or [UC6000-XU]BN68-02748D-01Eng.indb 282010-04-01 오후 7:23:43
29English 04 Adva\fced Features 7. Press the Red button \yon your remote\b 8. Press the PBC (WPS) b\yutton on your router within 2 minutes\b Your TV player autom\yatically acquires all the network setting va\ylues it needs and c\yonnects to your network\b 9. A\fter the network c\yonnection is set u\yp, press the RETURN button to exit th\ye Network Setup screen\b Network Setup (Auto) Most wireless networks hav\ye an optional secu\yrity system that requires devices that acc\yess the network to\y transmit an encrypted securi\yty code called an Ac\ycess or Security Key\b The Security Ke\yy is based on a Pas\ys Phrase, typically\y a word or a series o\f le\ytters and numbers o\y\f a specified length you were asked to enter wh\yen you set up secur\yity \for your wireless network\b I\f \yyou use this method\y o\f setting up the network connec\ytion, and have a Se\ycurity Key \for your \y wireless network, you \ywill have to enter\y the Pass Phrase during the setup pr\yocess\b How to set up automatica\b\by To set up the wireless connection a\yutomatically, \follo\yw these steps: 1. Follow Steps 1 through 6 in the “How\y to set up using PBC (WPS)” (p\b 28)\b 2. Press the ▼ button to select \yI\fter\fet Protoco\b Setup, and then press the ENTER E button\b Press the ▲ or ▼ button to select \yAuto, and then press the ENTER E button\b 3. Press the ▲ button to go to Se\bect a Network, and then press the ENTER E button\b The Network \function searches \for available \ywireless networks\b Whe\yn done, it displays a list o\f t\yhe available netwo\yrks\b 4. In the list o\f netw\yorks, press the ▲ or ▼ button to select \y a network, and then\y press the ENTER E button\b ✎I\f the AP is set to Hidden (Invisible), you have to select Add Network and enter the correct Network Name (SSID) and Security Key to establish the connection\b 5. I\f the Security/PIN \ypop-up appears, go\y to Step 6\b I\f the Network Connecting\y Screen appears, go to\y Step 10\b 6. Press the ▲ or ▼ button to select \ySecurity or PIN\b For most home networks\y, you would select \ySecurity (\for Security Key)\b The Security Screen appears\b 7. On the Security screen, enter your net\ywork’s Pass Phrase\b ✎You should be able to \find the Pass Phrase on one o\f the set up screens you used to set up your router or modem\b 8. To enter the Pass P\yhrase, \follow these\y general directions: – Pr ess the number but\ytons on your remote to enter numbers\b – Use the dir ection buttons on \yyour remote to move \from button to butto\yn on the Security Key screen\b – Pr ess the Red button \yto change case or \ydisplay symbols/characters\b\y – T o a enter letter o\yr symbol, move to t\yhe letter or symbol, and then pr\yess the ENTER E button\b – T o delete the last l\yetter or number you\y entered, press the Green button on your \yremote\b 9. When done, press the Blue butto\yn on your remote\b The Network Connecting\y screen appears\b 10. Wait until the conn\yection confirmation\y message is displayed, and then \ypress the ENTER E button\b The Network Setup screen re-appears\b 11. To test the connect\yion, press the RETURN button to select Network Test, and then press the ENTER E button\b Network Setup PBC(WPS) U Move E Enter R Return Select a Network : Not Selected ► Internet Protocol Setup : Auto IP Address : Subnet Mask : Gateway : DNS : Auto DNS Server : ABCDEFG HIJKLMN OPQRS\fU VW\bYZ 0~9 Network Setup n Move E Enter R Return Security Key 0 enteredNumber Lower case B Delete Space [UC6000-XU]BN68-02748D-01Eng.indb 292010-04-01 오후 7:23:44
30English Ad\fanced Features Network Setup (Ad-Hoc) You can connect to \ya mobile device wit\yhout an access poi\ynt through the “Samsung W\yireless LAN Adapter” \yby using a peer to peer netwo\yrk\b ✎This \function is available when SWL(Samsu\fg Wire\bess Li\fk) is set to Off \b How to co\f\fect to \few Ad-hoc device 1. Follow Steps 1 through 6 in the “How\y to set up using PBC (WPS)” (p\b 28)\b \y 2. Choose Se\bect a Network\b A list o\f devices/\ynetworks appears\b 3. While in the device\y list, press the Blue butto\yn on the remote\b ✎The message Ad-hoc is a direct Wi-Fi c o\f\fectio\f with ce\b\b pho\fe or PC. The existi\fg \f etwork system may have \bimited fu\fctio\fa\bity. D o you wa\ft to cha\fge the \fetwork c o\f\fectio\f? is displayed\b 4. Input the generate\yd Network Name (SSID) and Security Key into the device yo\yu want to connect\b How to co\f\fect a\f existi\fg Ad-hoc device 1. Follow Steps 1 through 6 in the “How\y to set up using PBC (WPS)” (p\b 28)\b \y 2. Choose Se\bect a Network\b The Device/Networ\yk list appears\b 3. Select the device yo\yu want in the Devi\yce list\b 4. I\f security key is r\yequired, input the secur\yity key\b ✎I\f network doesn’t operate normally, check the Network Name (SSID) and Security Key again\b An incorrect Security Key may cause a mal\function\b Network Setup (Ma\fua\b) I\f the other method\ys do not work, you \yneed to enter the Network setting va\ylues manually\b Getti\fg the Network Co\f\fectio\f Va\bues To get the Network \yconnection values \yon most Windows computers, \follow t\yhese steps: 1. Right click the Ne\ytwork icon on the \ybottom right o\f the\y screen\b 2. In the pop-up menu\y, click Status\b 3. On the dialog that \yappears, click the\y Support tab\b 4. On the Support tab,\y click the Details\y button\b The Network settings a\yre displayed\b How to set up ma\fua\b\by To enter the Networ\yk connection value\ys manually, \follow \y these steps: 1. Follow Steps 1 through 6 in the “How\y to set up using PBC (WPS)” (p\b 28)\b 2. Press the ▼ button to select \yI\fter\fet Protoco\b Setup, and then press the ENTER E button\b Press the ▲ or ▼ button to select \yMa\fua\b, and then press the ENTER E button\b 3. Press the ▼ button to go to t\yhe first entry field \y(IP Address)\b 4. Use the number but\ytons to enter numb\yers\b 5. When done with each\y field, use the ► button to move successively to the\y next field\b You can also use th\ye other arrow buttons to move\y up, down, and back\y\b 6. Enter the IP Address, Sub\fet Mask, and Gateway values\b 7. Press the ▲ or ▼ button to go to DNS\b 8. Press the ▼ button to go to t\yhe first DNS entry fi\yeld\b Enter the numbers a\ys above\b 9. When done, press the ▲ button to go to Se\bect a Network \b Select your networ\yk, and then press the ENTER E button\b 10. Go to Step 4 in the\y “How to set up au\ytomatically” (p\b 29), and \follow \ythe directions \from that point on\b [UC6000-XU]BN68-02748D-01Eng.indb 302010-04-01 오후 7:23:44