Samsung Ud46e-p Manual

151
Available buttons and features during music playback
 •Pause / Play
Pause or play music.
 •Rewind / Fast Forward
Rewind or fast forward music. Speed up playback up to 3x, if required. To play the previous music file, select  0098 twice.
 •
Previous / Next
To play the previous music file, select  028E twice. Selecting 
028E once will play the current music from the beginning.
To play the next music file, select  \202.
 •
Repeat
Configure Repeat mode. Repeat One plays the current music file repeatedly....

152
Supported Subtitle and Media play file formats
Subtitle
ExternalInternal
 •
MPEG-4 timed text (.ttxt)
 •SAMI (.smi)
 •
SubRip (.srt)
 •SubViewer (.sub)
 •Micro DVD (.sub or .txt)
 •SubStation Alpha (.ssa)
 •Advanced SubStation Alpha (.ass)
 •
Powerdivx (.psb)
 •Xsub
Container: AVI
 •SubStation Alpha
Container: MKV
 •
Advanced SubStation Alpha
Container: MKV
 •SubRip
Container: MKV
 •
MPEG-4 timed text
Container: MP4
Supported image resolutions
File Extension TypeResolution
*.jpg, *.jpeg JPEG15360 x...

153
Supported music file formats
File ExtensionTypeCodecComments
*.mp3 MPEGMPEG1 Audio Layer 3
*.m4a, *.mpa, *.aac, *.3ga MPEG4AAC
*.flac FLACFLACThe Seek ( jump) function is not supported.
Supports up to 2 channel
Supported Video Formats
 •
Video content will not play, or not play correctly, if there is an error in the content or the container.
 •Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec listed in the table above.
 •If the Index Table...

154
File 
ExtensionContainer
Video Codec ResolutionFrame rate
(fps) Bit rate
(Mbps)Audio Codec
*.avi
*.mkv
*.asf
*.wmv
*.mp4
*.mov
*.3gp
*.vro
*.mpg
*.mpeg
*.ts
*.tp
*.trp
*.mov
*.flv
*.vob
*.svi
*.m2ts
*.mts
*.divxAVI
MKV
ASF
MP4
3GP
VRO
VOB
PS
TS DivX 3.11 / 4.x / 5.x / 6.x
1920 x 10806~30 30AC3
LPCM
ADMPCM
(IMA, MS)
AAC
HE-AAC
WMA
DD+
MPEG(MP3)
DTS Core
G.711(ALaw,μ-Law)
MPEG4 SP / ASP
H.264 BP / MP / HP
Motion JPEG
Window Media Video v9
MPEG2
MPEG1
VP6 640 x 480 4
MVC 1920 x 108024 / 25 / 30 40...

155
Troubleshooting Guide
Requirements Before Contacting Samsung Customer Service Centre
Before calling Samsung Customer Service 
Centre, test your product as follows. If 
the problem persists, contact Samsung 
Customer Service Centre.
Testing the Product
Check if your product is operating normally by using the product test function.
If the screen remains blank while the power LED blinks even when the product is correctly connected to a PC, perform product testing.
1 Power off both the PC and product.
2...

156
Check the followings.
Installation issue (PC mode)
The screen keeps switching on and off.Check the cable connection between the product and PC, and ensure the connection is secure.
Blank spaces are found on all four sides of the screen when 
an HDMI or HDMI-DVI cable is connected to the product and 
PC.The blank spaces found on the screen have nothing to do with the product.
Blank spaces on the screen are caused by the PC or graphics card. To resolve the problem, adjust the 
screen size in the HDMI...

157
Screen issue
The screen is not clear. The screen is blurry.Adjust Coarse and Fine.
Remove any accessories (video extension cable, etc) and try again.
Set the resolution and frequency to the recommended level.
The screen appears unstable and shaky.Check that the resolution and frequency of the PC and graphics card are set within a range compatible 
with the product. Then, change the screen settings if required by referring to the Additional 
Information on the product menu and the Standard Signal Mode...

158
Screen issue
The screen display does not look normal.Encoded video content may cause the display to appear corrupted in scenes featuring fast moving 
objects such as in a sports event or action video.
Low signal level or low picture quality may cause the display to appear corrupted. This does not mean 
the product is defective.
A cell phone within a distance of one-meter radius may cause static on analogue and digital products.
The brightness and colour do not look normal.Go to Picture and adjust the...

159
Sound issue
The volume is too low.Adjust the volume.
If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound 
card or software programme.
Video is available but there is no sound.If an HDMI cable is connected, check the audio output settings on the PC.
If a source device is used
 •Make sure the audio cable is properly connected to the audio input port on the product.
 •Check the audio output settings for the source device.
(For example, if an HDMI cable...

160
Remote control issue
The remote control does not work.Make sure that the batteries are correctly in place (+/-).
Check if the batteries are flat.
Check for power failure.
Make sure that the power cord is connected.
Check for any special lighting or neon signs switched on in the vicinity.
Source device issue
A beeping sound is heard when my PC is booting.If a beeping sound is heard when your PC is booting, have your PC serviced.