Samsung Ud46e-p Manual

111
Network
Network  Status
MENU m → Network → Network Status → ENTER E
You can check the current network and Internet status.
Network Status
Wired network and Internet connection settings complete.
You are connected to the Internet. If you have any problems using online services, please 
contact your Internet service provider.
Close
Retry
IP Settings
 -
The displayed image may differ depending on the model.
Network  Settings
MENU m → Network → Network Settings → ENTER E
Configure network settings to use...

112
Network Settings (Wired)
Connecting to a Wired Network
There are three ways to attach your product to your LAN using cable.
 •You can attach your product to your LAN by connecting the LAN port on the back of your product 
to an external modem using a LAN cable.
See the diagram below.
RJ45The Modem Port on the Wall External Modem
(ADSL / VDSL)
Modem Cable LAN CableLAN
 •
You can attach your product to your LAN by connecting the LAN port on the back of your product 
to an IP Sharer which is connected...

113
Set the network connection to use Internet services such as perform software upgrades.
Automatic Network Settings (Wired)
Connect to the network using a LAN cable.
Make sure a LAN cable is connected first.
How to set up automatically
1 Set Network type to Wired from the Network Settings page.
2 Press the Connect button to start Network Settings.
 -
The Connect button is only enabled when the LAN cable is properly connected.
3 The network test screen appears and verifies the network connection.
When...

114
Multimedia  Device  Settings
MENU m → Network → Multimedia Device Settings → ENTER E
Allow other devices such as smart phones and tablets on your network, to share content with your 
product.
Server  Network  Settings
MENU m → Network → Server Network Settings → ENTER E
C onnect  to server
To run Player connect to a network.
 •
Server Address / SSL / Port
 ―
If the SSL option is enabled, the server is configured to use https and data transfer is encrypted.
 ―Enter the server IP address and port...

115
System
A ccessibility
MENU m → System  → Accessibility → ENTER E
Accessibility
Menu Transparency
High Contrast
Enlarge Medium
Off
Off
 -The displayed image may differ depending on the model.
Menu  Transparency
Adjust transparency of menu box.
 •
High / Medium / Low
High  Contrast
Set the background and font to high-contrast colours in Menu. Menu transparencies become opaque when the option is 
selected.
 •
Off / On
Enlarge
Set whether to enlarge highlighted item in Menu.
 •
Off / On
Chapter  10  

116
Setup
MENU m → System  → Setup → ENTER E
77
System
Accessibility
Setup
Time
Auto Source Switching
Power Control
Eco Solution
Temperature Control
 -
The displayed image may differ depending on the model.
Initial settings (S ystem)
After powering on the product for the first time, configure basic settings such as the language, channel and time.
Press the 
 button.
 ―
Enter your 4 digit PIN number. The default PIN number is “0-0-0-0". 
If you want to change the PIN number, use the Change PIN...

117
6 Play via
 -MagicInfo / URL Launcher
Select the appropriate player mode depending on the environment where you are using the product.
 ― The Play via setting step only appears when connected to the network.
7 Device Name
 - User Input / [Signage]Display 1 ~ 6
Select or enter a device name.
This name can be shown on network remote controls over the network.
8 Setup Complete
Congratulations! Setup is complete and you're ready to get started.  

118
Time
MENU m → System  → Time → ENTER E
Time
Clock Set
DST
Sleep Timer
Power On Delay Off
Off
0 sec
 - The displayed image may differ depending on the model.
You can configure Clock Set or Sleep Timer. You can also set the product to automatically turn on or off at a specified time 
using the Timer function.
 ―
Press the INFO button if you want to view the current time.
Clock  Set
Select Clock Set. Select Date  or Time, and then press E.
Use the number buttons to enter numbers or press the up and down...

119
Turning on the display with Auto Source Switching On, and the previous video source selection is not active, the display will 
automatically search the different video input sources for active video.
A uto  S ource  S witching
When the Auto Source Switching is On , the display video source will automatically be searched for active video.
The Primary Source selection will be activated, if the current video source is not recognized.
Secondary Source selection will become active, if no primary video...

120
Power  C ontrol
MENU m → System  → Power Control → ENTER E
Power Control
Auto Power On
PC module power
Max. Power Saving
Standby Control
Power Button
Network Standby
Off
On
Auto
Power on only Off
 -The displayed image may differ depending on the model.
Auto  P ower  O n
This feature automatically turns on the product as soon as it is plugged in. Pressing the power button is not needed.
 •
Off / On
PC module  power
The PC module can be turned on/off separately from the LFD.
Synced power -on
To turn on...