Samsung Ud46d-p Manual

MagicInfo Setup Wizard - v.1.12Select TCP/IP - step 2
Obtain an IP address automatically
Use the following IP address:
IP address:
Subnet mask:
Default gateway: 192 . 168 .  0  . 102
255 . 255 . 255 .  0
192 . 168 .   0   .   1
Obtain DNS server address automatically
Use the following DNS server address:
Preferred DNS server:
Alternate DNS server: 10 . 44 . 33 . 22
10 . 33 . 22 . 11
< Back(B) Next(N) > Finish Cancel
4 Enter the IP information.
MagicInfo Setup Wizard - v.1.12
Select Language -step 3...

Changing the Input source
Source
SOURCE → Source 
Source
HDMI1HDMI2 AV DisplayPort
Component
PC
To go to Options, press and hold the Enter button.
 -
The displayed image may differ depending on the model.
Source  allows you to select a variety of sources and change source device names.
You can display the screen of a source device connected to the product. Select a source from source list to display the screen 
of the selected source.
 ― The input source can also be changed by using the SOURCE button on...

Using MDC
MDC Programme Installation/Uninstallation
Installation
 ―MDC installation can be affected by the graphics card, mother board and network conditions.
1 Click the MDC Unified installation programme.
2 Select a language for installation. Next, click "OK".
3 When the " Welcome to the InstallShield Wizard for MDC_Unified " screen appears, click "Next".
4 In the "License Agreement" window displayed, select  
"I accept the terms in the license agreement" and...

Connecting to MDC
Using MDC via RS-232C (serial data communications standards)
An RS-232C serial cable must be connected to the serial ports on the PC and monitor.
RS232C IN/OUT
Monitor 1
Monitor 2
Computer  

Using MDC via Ethernet
Enter the IP for the primary display device and connect the device to the PC. Display devices can be connected to each other using a LAN cable.
Connection using a direct LAN cable
 ―Multiple products can be connected using the RJ45 port on the product and the LAN ports on the HUB.
RJ45 MDC
HUB
Monitor 1
Monitor 2 Computer  

Connection using a cross LAN cable
 ―Multiple products can be connected using the RS232C IN / OUT port on the product.
Monitor 1
Monitor 2
Computer
RS232C OUT
RJ45 MDC  

Home feature
 ―To use the Player feature, set Play via to MagicInfo in System .
Play a range of content such as channels with schedules assigned, templates or files.
Play channels or content using any of the following methods.
 • Network Channel: Play content using the server.
 ―
To run Network Channel, make sure the product is connected to the server.
 • Local Channel: Play content in internal memory or from external memory.
Player
HOME  → Player → ENTER E
PlayerPlay various contents sych as scheduled...

Approving a connected device from the server
 •Set MagicInfo Mode to MagicInfo in Server Network Settings.
Approve and use the MagicInfo server now.
 ―
First configure the server Network Settings before device approval.
1 Access the server you have assigned to your device.
2 Enter your ID and password to log in.
3 Select Device from the top menu bar.
4 Select MagicInfo from the menus on the left.
5 Select Unapproved from the sub-menus of MagicInfo.
6 Select the Approve button for your device from the...

7 Enter the information required to approve the device.
 •Device Name: Enter the device name.
 •
Device Group: Select  to specify the group.
 •Location: Enter the current location of the device.
 ―
Pressing the INFO button on the remote when a network schedule is running will display the details of 
the schedule. Check that the correct device has been selected by viewing the device ID in the details.
8 Select the All  menu to check that the device has been registered.
9 When the device is approved by the...

Network Channel
Play content, templates and schedules configured on the server.
 •You can view whether the server is connected (approval) in the Player menu screen.
To view whether the server is connected when a Network Channel is running, press INFO on the remote.
1 Select Network Channel from the Player menu.
2 Network Channel will run.
Local Channel
Play a schedule or channel that was configured in the product.
1 Select Local Channel from the Player menu.
 ―
The No channels message appears if no...