Samsung Ud46d-p Manual

A
B
C
E
Figure 1.3 Side view
D D
Figure 1.2 Side view
Installation on an Indented Wall
 ―
Contact Samsung Customer Service Centre for further details.
Plane view
A Minimum 40 mm
B Minimum 70 mm
C Minimum 50 mm
D Minimum 50 mm
E Ambient temperature: Under 35
C
 ―When installing the product on an indented wall, allow at least the space specified above between the product and wall for 
ventilation and ensure that the ambient temperature is kept below 35
C.
Dimensions
1
2
3
4
5
Unit: mm (inches)
Model...

Installing the Wall MountPreparing before installing Wall-Mount
To install a wall-mount from another manufacturer, use the Holder-Ring.
Installing the Wall Mount
The wall mount kit (sold separately) allows you to mount the product on the wall.
For detailed information on installing the wall mount, see the instructions provided with the wall mount.
We recommend you contact a technician for assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the...

Wall Mount Kit Specifications (VESA)
 ―Install your wall mount on a solid wall perpendicular to the floor. Before 
attaching the wall mount to surfaces other than plaster board, please contact 
your nearest dealer for additional information.
If you install the product on a slanted wall, it may fall and result in severe 
personal injury.
 • Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are provided.
 •Do not use screws that are longer than the standard...

Connecting and Using a Source Device
Before Connecting
Pre-connection Checkpoints
 ―Before connecting a source device, read the user manual provided with it.
The number and locations of ports on source devices may differ from device to device.
 ― Do not connect the power cable until all connections are completed.
Connecting the power cable during connection may damage the product.
 ― Connect the sound ports correctly: left = white and right = red.
 ―Check the types of ports at the back of the product you...

Connection using a DVI cable (Digital type)
DVI IN (MAGICINFO)
 AUDIO IN
Connection Using an HDMI-DVI Cable
 ―When you connect a PC to the product using an HDMI-DVI cable, set Edit Name to DVI PC to access 
video and audio content stored on the PC.
HDMI IN 1, HDMI IN 2
AUDIO IN      

Connection Using an HDMI Cable
HDMI IN 1, HDMI IN 2
Connection Using an DP Cable
DP IN
 •Precautions for using DP
 ―
To increase the standby power capacity, the product stops DP communication when it is turned 
off or in power-saving mode.
If the product in dual monitor mode is turned off or goes into power-saving mode, monitor 
setting changes may not be updated. As a result, screen output may not be displayed properly.
In the occurrence of this issue, set Max. Power Saving to Off before using the...

Connecting to a Video Device
 •Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
 •You can connect a video device to the product using a cable.
 ―
Connecting parts may differ in different products.
 ―Press the SOURCE button on the remote control to change the source.
Connection Using the AV Cable
AV / COMPONENT IN
AUDIO IN
Connection Using the component Cable
AV / COMPONENT IN
AUDIO IN      

Connection Using an HDMI-DVI Cable
 ―Audio will not be enabled if the product is connected to a video device using an HDMI-DVI cable. To 
resolve this, additionally connect an audio cable to the audio ports on the product and video device. 
When you connect a video device to the product using an HDMI-DVI cable, set  Edit Name to DVI 
Devices to access video and audio content stored on the video device.
 ― Supported resolutions include 1080p (50/60Hz), 720p (50/60Hz), 480p, and 576p.
HDMI IN 1, HDMI IN 2...

Connecting to an Audio System
 ―Connecting parts may differ in different products.
AUDIO OUT
Connecting the LAN Cable
 ―Connecting parts may differ in different products.
RJ45
 • Use Cat7(*STP Type) cable for the connection. 
*Shielded Twist Pair    

Connecting the network box (Sold separately)
 ―For details on how to connect to a network box, refer to the user's manual provided with the network box upon purchase.
MagicInfo
To use MagicInfo, a network box (sold separately) must be connected to the product.
 ―To change the MagicInfo settings, run "MagicinfoSetupWizard" on the desktop.
 ―For details on how to use MagicInfo, refer to the DVD provided with the network box.
 ―The information in this section is subject to change without notice...