Samsung Ud46cb Manual

61
Source  A uto Switch  Settings
Source AutoSwitch  Settings
Source AutoSwitch  Settings
Move Enter Return
Source AutoSwitch
Primary Source Recovery
Primary Source  
Secondary Source
 
: 　　　　PC : 　　　  DVI  : On
: On
On Off
 -
The displayed image may differ depending on the model.
 - Source  A uto Switch  Settings is disabled if PIP is set to O n.
Source  A uto Switch
When the Source AutoSwitch is On , the display video source will automatically be searched for active video.
The Primary Source selection...

62
Primary  Source
Source AutoSwitch  Settings
Source AutoSwitch  Settings
Source AutoSwitch       
Primary Source Recovery       
Primary Source                      
Secondary Source      
Move : DVI  : 
: On
: On
Enter Return
 - The displayed image may differ depending on the model.
Specify Primary Source for the automatic input source.
Secondary  Source
Source AutoSwitch  Settings
Source AutoSwitch  Settings
Move Enter Return
Source AutoSwitch            
Primary Source Recovery        
Primary...

63
Picture
PC / DVI / MagicInfo Mode
Chapter  05
M ode
MENU m : T  Picture  Mode  ENTER 
Move Enter Return
Mode  ：사용자 조정
Custom  
Color Tone  ：---- 
Color Control 
Color Temp. 
Image Lock   
Auto Adjustment 
Picture
Picture
Custom Information
Advertisement
▶More
 -
The displayed image may differ depending on the model.
The LCD Display has four automatic picture settings ("Information",  " Advertisement" and "Custom") that are preset at the 
factory.
 • Information
Recommended for...

64
Custom
Move Enter Return
Contrast
Brightness 
Sharpness 
Gamma  : 
  90
90  
50 
 
Custom
Custom
Natural
Mode1
Mode2
Mode3
 -
The displayed image may differ depending on the model.
By using the on-screen menus, the contrast and brightness can be changed to your personal preference. 
 ―
By adjusting the picture using the Custom function, Mode will change to Custom mode.
 ―Not available when Dynamic Contrast is set to On .
Contrast
Adjusts the Contrast.
Brightness
Adjusts the Brightness.
Sharpness...

65
Color  Tone
Move Enter Return
Mode   : Custom
Custom  
Color Tone  : 16:9 
Color Control 
Color Temp.   : 16:9  
Image Lock   : 동작
Auto Adjustment  :  일반
Picture
Picture
Off
Normal Cool
Warm
Custom
▶More
 -
The displayed image may differ depending on the model.
The Color tones can be changed.
 ―
Not available when Dynamic Contrast is set to On .
 •
Off / Cool / Normal / Warm / Custom
 ―
If you set the Color Tone to Cool, Normal, Warm, or Custom, the Color Temp. function is disabled.
 ―If you set the...

66
Color  Temp .
Color Temp.                  10000K 
 -
The displayed image may differ depending on the model.
Color Temp. is a measure of the 'warmth' of the image Colors.
 ―
This function is enabled when Mode is set to Custom, and Dynamic Contrast and Color Tone are Off.
Image  Lock
Move Enter Return
Coarse
Fine 
Position 
  2200
   55  
   ▶ 
 
Image Lock
Image Lock
 -
The displayed image may differ depending on the model.
 - Available in PC mode only.
Image Lock is used to fine-tune and get...

67
Auto  A djustment
Auto Adjustment
Please wait.i
 - The displayed image may differ depending on the model.
 - Available in PC mode only.
The values of Fine, Coarse, Position are adjusted automatically. 
By changing the resolution in the control panel, the auto function is performed.
Signal  Balance
Move Enter Return
Signal Balance  ：사용자 조정
Signal Control 
Signal Balance
Signal Balance
Off
On
 -
The displayed image may differ depending on the model.
Signal  Balance
Selects either On  or Off with the...

68
Size
Move Enter Return
Signal Balance
Size   : 
HDMI Black Level    :  일반
PIP Picture
Dynamic Contrast    : Off  
Lamp Control    : 100
Picture Reset
Picture
Picture
▶More 
16:9
4:3
Original Ratio
 -
The displayed image may differ depending on the model.
The Size can be switched.
 • 16:9 / 4:3 / Original Ratio
HDMI  Black  Level
Move Enter Return
Signal Balance
Size       : 16:9
HDMI Black Level    :  
PIP Picture
Dynamic Contrast    : Off
Lamp Control      : 100
Picture Reset
Picture
Picture
▶More...

69
PIP Picture
Move Enter Return
Contrast
Brightness 
Sharpness 
Color   
Tint                 G  50            R  100
45  
76
60
50 
 
PIP Picture
PIP Picture
 -
The displayed image may differ depending on the model.
Adjusts the PIP Screen Settings.
 ―
Available Modes: PIP On
 • Contrast
Adjusts the Contrast of the PIP window on the screen.
 •Brightness
Adjusts the Brightness of the PIP window on the screen.
 •Sharpness
Adjusts the Sharpness of the PIP window on the screen.
 •Color
Adjusts the Color of...

70
Lamp  Control
Lamp Control                       100 
 -
The displayed image may differ depending on the model.
Adjusts the inverter lamp in order to reduce energy consumption.
 ―
Not available when Dynamic Contrast is set to On .
Picture  Reset
Reset picture settings?i
Ye sNo
 -
The displayed image may differ depending on the model.
Reset the screen settings.