Samsung Ud46cb Manual
Here you can view all the pages of manual Samsung Ud46cb Manual. The Samsung manuals for Display are available online for free. You can easily download all the documents as PDF.
Page 31
31 •Connector : RJ45 MDC Direct LAN cable (PC to HUB) RJ45 MDC RJ45 MDC HUB P1 P1 P2 P2 SignalP1P2Signal TX+11TX+ TX-22TX- RX+33RX+ RX-66RX- Cross LAN cable (PC to PC) RJ45 MDCP1 P2 SignalP1P2Signal TX+13RX+ TX-26RX- RX+31TX+ RX-62TX-
Page 32
32 Connection •Connection 1 RS232CIN OUTRS232CINOUTRS232CINOUTRS232CINOUT • Connection 2 RJ45RJ45 • Connection 3 RS232C OUT RJ45RS232CIN OUTRS232CINOUTRS232CIN OUT
Page 33
33 Control Codes Viewing control state (Get control command) HeaderCommand IDData length Checksum 0xAA Command type 0 Controlling (Set control command) HeaderCommand IDData length DataChecksum 0xAA Command type 1Value Command No.Command type CommandValue range 1Power control 0x110~1 2Volume control 0x120~100 3Input source control 0x14- 4Screen mode control 0x18- 5Screen size control 0x190~255 6PIP on/off control 0x3C0~1 7Auto adjustment control 0x3D0 8Video wall mode control 0x5C0~1 9Safety Lock 0x5D0~1...
Page 34
34 Power control •Function A product can be powered on and off using a PC. •Viewing power state (Get Power ON / OFF Status) Header Command IDData length Checksum 0xAA 0x11 0 • Setting power ON/Off (Set Power ON / OFF) Header Command IDData length DataChecksum 0xAA 0x11 1"Power" "Power": Power code to be set on a product. 1: Power ON 0: Power OFF • Ack Header Command IDData length Ack/Nakr-CMDVal1 Checksum 0xAA 0xFF 3'A'0x11"Power" "Power": Power code to be set...
Page 35
35 Input source control •Function The input source of a product can be changed using a PC. •Viewing input source state (Get Input Source Status) Header Command IDData length Checksum 0xAA 0x14 0 • Setting the input source (Set Input Source) Header Command IDData length DataChecksum 0xAA 0x14 1"Input Source" "Input Source": An input source code to be set on a product. 0x14PC 0x18 DVI 0x0C Input source 0x08 Component 0x20 MagicInfo 0x1F DVI_video 0x30 RF( TV ) 0x40 DT V 0x21 HDMI1 0x22...
Page 36
36 Screen •Function The screen mode of a product can be changed using a PC. Screen mode cannot be controlled when the Video Wall function is enabled. ― This control can only be used on models that include a TV. • Viewing screen status (Get Screen Mode Status) Header Command IDData length Checksum 0xAA 0x18 0 • Setting the picture size (Set Picture Size) Header Command IDData length DataChecksum 0xAA 0x18 1"Screen Mode" "Screen Mode": A code that sets the product status 0x0116 : 9 0x04...
Page 37
37 Screen size control •Function The screen size of a product can be changed using a PC. •Viewing the screen size (Get Screen Size Status) Header Command IDData length Checksum 0xAA 0x19 0 • Ack Header Command IDData length Ack/Nak r-CMDVal1 Checksum 0xAA 0xFF 3'A' 0x19"Screen Size" "Screen Size": product screen size (range: 0 – 255, unit: inch) • Nak Header Command IDData length Ack/Nak r-CMDVal1 Checksum 0xAA 0xFF 3'N' 0x19"ERR" "ERR": A code...
Page 38
38 Auto adjustment control (PC and BNC only) •Function Automatically adjust the PC system screen using a PC. •Viewing auto adjustment state (Get Auto Adjustment Status) None •Setting auto adjustment (Set Auto Adjustment) Header Command IDData length Data Checksum 0xAA 0x3D 1"Auto Adjustment" "Auto Adjustment" : 0x00 (at all times) • Ack Header Command IDData length Ack/Nak r-CMDVal1 Checksum 0xAA 0xFF 3'A' 0x3D"Auto Adjustment" • Nak Header Command IDData length...
Page 39
39 Safety Lock •Function PC can be used to turn the Safety Lock function on or off on a product. This control is available regardless of whether or not the power is turned on. •Viewing the safety lock state (Get Safety Lock Status) Header Command IDData length Checksum 0xAA 0x5D 0 • Enabling or disabling safety lock (Set Safety Lock Enable / Disable) Header Command IDData length Data Checksum 0xAA 0x5D 1"Safety Lock" "Safety Lock": Safety lock code to be set on a product 1: ON 0: OFF...
Page 40
40 Video Wall On •Function Personal Computer turns Video Wall of TV / Monitor ON/OFF. This function is not available in MagicInfo. •Get Video Wall On/Off Status Header Command IDData length Checksum 0xAA 0x84 0 • Set Video Wall On/Off Header Command IDData length Data Checksum 0xAA 0x84 1V.Wall_On • V.Wall_On : Video Wall Code to set on TV / Monitor 1: Video Wall ON 0: Video Wall OFF • Ack Header Command IDData length Ack/Nakr-CMDVal1Checksum 0xAA 0xFF 3'A'0x84V.Wall_ On V.Wall_On : Same as...