Samsung Television UNES7550 User Manual

menu.
 
NSwitching to the selected device 
may take up to 2 minutes. You 
cannot cancel the switching 
operation while switching is in 
progress.
 
NIf you have selected an Anynet+ 
device using  Source function and 
then selecting its input source, 
you cannot use the Anynet+ 
function. Make sure to switch to  

an Anynet+ device by using the 
Device List.
Listening through a  Receiver
You can listen to sound through a 
receiver (i.e. Home Theater) instead 
of the TV Speaker. To listen to sound 
through a receiver, go to  Receiver 
screen ( System 
→  Anynet+ (HDMI-
CEC)  
→  Receiver
). Then select Receiver  
and set to  On.
 
NIf your receiver supports audio only,  

it may not appear in the device list.
 
NThe receiver will work when you 
have properly connected the optical 
in jack of the receiver to the  DIGITAL 
AUDIO OUT (OPTICAL)  port of the TV.
 
NWhen the receiver (i.e. Home Theater) 
is set to On, you can hear sound 
output from the TV’s Optical jack. 
When the TV is displaying a DTV 
(air) signal, the TV will send out 5.1 
channel sound to the receiver. When  

the source is a digital component 
such as a DVD player and it is 
connected to the TV via HDMI, you 
will hear only 2 channel sound from 
the receiver.
Using the ARC function You can listen to sound through a 
receiver connected using an HDMI cable 
without connecting a separate optical 
cable. To listen to sound through a 
receiver using the ARC function, go to  

Receiver screen ( System 
→  Anynet+ 
(HDMI-CEC)  → Receiver
). Then select 
Receiver  and set to  On.
 
NTo use the ARC function, a receiver 
which supports the HDMI-CEC and 
ARC features must be connected to 
the  HDMI IN 2 (ARC)  port.
 
NTo disable the ARC function, 
set the Receiver  to Off. Even if 
the TV transmits the ARC signal 
continuously, the receiver will be  

blocked from receiving the signal. 

Troubleshooting
 
NTo view a list of all troubleshooting 
items, go to e-Manual home screen 
(Menu  → Support 
→ e-Manual 
→ Other 
Information) or press the SUPPORT  
button, and then search a desired item 
by selecting a chapter.
Menu  → Support 
→ Self Diagnosis 
→ 
Troubleshooting
If the TV seems to have a problem, 
first review this list of possible 
Other Information 

problems and solution. Also review 
the Troubleshooting Section in the 
e-Manual. If none of the troubleshooting 
tips apply, visit www.samsung.com/
support or call Samsung customer 
Service at 1-800-SAMSUNG (1-800-
726-7864).
SMART Interaction When you use a SMART Interaction 
function, check whether the 
corresponding menu turned on. ( Menu  

→ 
System 
→ 
Voice and Motion Control)
 
ΠVoice Control function can be 
affected recognition by unclear 
pronunciation, voice level, or 
surrounding noise. For accurate voice 
recognition, refer to the Standard 
Voice Command list at the Samsung 
web site (www.samsung.com 
→ 
support  → Manuals & Downloads).
 
ΠVoice Control performance may vary 
depending on the language. 

 
ΠMotion Control function can be 
affected recognition by brightness of 
room and brightness of recognized 
face. Alternatively, recognition 
rate of Motion Control may differ 
depending on the TV camera's angle 
or the operating speed. Therefore, 
we recommend to adjust an ambient 
brightness and TV camera's angle 
before using 
Motion Control.
 
ΠIf you have other questions, visit