Samsung Television UNES7550 User Manual

 
NYou can only control Anynet+ 
devices using the TV’s remote 
control, not the buttons on the TV.
 
NThe TV remote control may not work 
under certain conditions. If this 
occurs, reselect the Anynet+ device.
 
NThe Anynet+ functions do not 
operate with other manufacturers’ 
products.
 
NFor instructions explaining how to 
connect Anynet+ external devices,  

refer to the device’s user manual. 
You must connect an Anynet+ device 
using an HDMI cable. Some HDMI 
cables may not support Anynet+ 
functions.
 
NAnynet+ works when the AV device 
supporting Anynet+ is in the standby 
or on status.
 
NAnynet+ supports up to 12 AV 
devices in total. Note that you can 
connect up to 3 devices of the same  

type.
 
NHowever, you can connect only one 
Anynet+ Home Theater. To connect 
an Anynet+ Home Theater, connect 
the Home Theater to the TV using an 
HDMI cable then:
 
– To hear sound from the Home 
Theater’s front, left and right 
speakers and the subwoofer only, 
connect a digital optical cable 
between the 
DIGITAL AUDIO OUT  

(OPTICAL) port on your TV and the 
Digital Audio Input on the Home 
Theater.
 
– To hear 5.1 channel audio, connect 
HDMI cables to your Anynet+ DVD 
player, satellite box, etc. Then, 
connect the DIGITAL AUDIO OUT 
(OPTICAL) port on your DVD 
player, Satellite Box, etc. (i.e. 
Anynet + Device 1 or 2) directly to 
the Home Theater, not the TV. 

Anynet+ (HDMI-CEC) Menu
The Anynet+ menu changes depending 
on the type and status of the Anynet+ 
devices connected to the TV.
 
●View TV
Changes Anynet+ mode to TV 
broadcast mode.
 
●Device List
Shows the Anynet+ device list.
 
●(device_name)  Menu
Shows the menu of the connected  

device menus. E.g. if a DVD player is 
connected, the disc menu of the DVD 
player will appear.
 
●(device_name)  Tools
Shows the tools menu of the 
connected device. E.g. if a DVD 
player is connected, the tools menu 
of the DVD player will appear.
 
NDepending on the device, this 
menu may not be available.
 
●(device_name)  Title Menu 

Shows the title menu of the disc in 
the connected device. E.g. If a DVD 
player is connected, the title menu 
of the movie in the DVD player will 
appear.
 
NDepending on the device, this 
menu may not be available.
 
●Receiver
Sound is played through the receiver.
Setting up Anynet+ (HDMI-CEC)
 
●Anynet+ (HDMI-CEC) 

To use the Anynet+ Function, Anynet+ 
(HDMI-CEC) must be set to On.
 
NWhen the Anynet+ (HDMI-CEC)  
function is disabled, all the Anynet+ 
related operations are deactivated
 
●Auto Turn Off
Set an Anynet+ Device to turn off 
automatically when the TV is turned 
o f f.
 
NIf the Auto Turn Off is set to Ye s , 
running external devices will turn off  

at the same time as the TV powers 
o f f.
 
NMay not be enabled depending on 
the device.
 
●Receiver
You can listen to sound through a 
receiver (i.e. Home Theater) instead of 
the TV Speaker.
Switching between Anynet+ Devices 1. 
Open  the  Tools menu using your 
remote, and then select Anynet+  

(HDMI-CEC).
2.  
Select  Device List. The Device List 
screen appears.
 
NIf you cannot find a device you 
want, select Refresh  to refresh the 
list.
3.  
Select a device, and then wait until 
switch to the selected device.
 
NThe Device List menu appears 
only when you set Anynet+ 
(HDMI-CEC) to On in the System