Samsung Television UNES7550 User Manual

make sure to search devices again or 
turn your TV off and on again.
I want to start Anynet+. Check if the Anynet+ device is properly 
connected to the TV and check if the 
Anynet+ (HDMI-CEC)  is set to On. 
(System  
→  Anynet+ (HDMI-CEC)
)
Open the Tools menu using your 
remote and then select  Anynet+ (HDMI-
CEC) . Then select a menu you want.
I want to exit Anynet+. 

Select View TV in the Anynet+ menu.
Go to  Source screen using your remote 
and select a non-Anynet+ device.
The message  Connecting to Anynet+ device 
...  appears on the screen.
You cannot use the remote control 
when you are configuring Anynet+ or 
switching to a view mode.
Use the remote control after the TV has 
completed Anynet+ configuration or 
has finished switching to Anynet+. 

The Anynet+ device does not play.You cannot use the play function when 
Setup is in progress.
The connected device is not displayed. Check whether or not the device 
supports Anynet+ functions.
Check whether or not the HDMI cable is 
properly connected.
Check whether Anynet+ (HDMI-CEC)  is 
set to On. ( System 
→  Anynet+ (HDMI-
CEC) ) 

Search Anynet+ devices again.
Anynet+ requires an HDMI connection. 
Make sure the device is connected to 
your TV with an HDMI cable.
Some HDMI cables may not support 
Anynet+ functions.
If the connection is terminated because 
there has been a power failure or the 
HDMI cable has been disconnected, 
please repeat the device scan.
The TV sound is not output through the  

receiver.Connect the optical cable between TV 
and the receiver.
The ARC function enables digital output 
of sound using the  HDMI IN 2(ARC) port 
and can only be operated when the TV 
is connected to an audio receiver that 
supports the ARC function. 

AllShare Play (Troubleshooting)
This file may not be playable properly. This may appear because of high bit rate 
of content. Content generally will play 
but could experience some playability 
issue. 

Smart Hub (Troubleshooting)
Some application contents only appear in 
English. How can I change the language? The Application content language may 
be different from the application user 
interface language.
The ability to change the language 
depends on the service provider.
Some application services do not work. Check with the service provider.
Refer to the help website for application  

service provider information.
When a network error occurs, I can only use 
the setting menu. If network connection doesn’t work, 
your service might be limited, as all 
functions except the setting menu are 
needed to connect to the internet. 

Web Browser (Troubleshooting)1. 
To  open  Web Browser , select We b  
Browser in the Smart Hub . Unlike 
a PC, the Web Browser may be 
displayed differently.
2.  
The  Web Browser is not compatible 
with a Java application.
3.  
When attempted to download a file, 
but the file could not be saved and 
an error message appeared.
4.  
Access may be blocked to some  

websites or to web browsers 
operated by certain businesses.
5.  
Playback of Flash video may be 
restricted.
6.  
E-commerce, for purchasing 
products online, is not supported.
7.  
Scrolling a web page that allows 
only part (and not the whole) of 
the page to be scrolled may cause 
corrupted characters.
8.  
ActiveX is not supported.