Samsung Television UNES7150 User Manual

characters long using the remote 
control. Select Done when finished. 
– If the security key is not at least 
9 characters long, 
Done is not 
available.
 
– To connect a mobile device to the 
TV, you must input the security key 
into the device.
 
– If the network does not operate 
correctly, check the security key 
again. An incorrect security key may  

cause a malfunction.
AllShare Settings
Menu  → Network
 
→  AllShare Settings
AllShare Play  lets you play  Videos, 
Photos, or Music located on your PC or 
your DLNA compatible device on the 
TV using a network connection. It also 
lets you control the TV through these 
devices.
The AllShare Settings screen lists your 
network connected AllShare devices  

and their IP addresses. Through this 
screen, you can allow a device to 
access the TV, deny access, or delete 
the device from the AllShare list.
The AllShare Settings screen only 
displays devices if you have established 
networked connections to AllShare 
devices. Otherwise, it will be empty.
To use the AllShare network function, 
you must install the AllShare network 
software on your PC. For details on set  

up options, refer to "Using the DLNA 
Function".
Device Name
Menu  → Network
 
→  Device Name
Enter a name for this TV. This name will 
be shown on network remote controls 
and devices using  AllShare Play.
 
NA keyboard appears on the screen. 
Key in a name for your TV using 
your remote control. When finished, 
select  Done. 

 
N To enter letters, highlight and select 
each letter. To enter numbers, 
highlight and select each number or 
press the number buttons on your 
remote.
 
N To shift to capital letters (or from 
capital letters to lower case), select 
the Caps or Shift button.
 
N To display symbols and punctuation, 
select 1
. To redisplay letters, select 
1
 again. 

Setting the TimeTime
Menu  → System
 
→  Time
 
NThe time you set will appear when you 
press the INFO  button.
 
●Clock
Set the clock to use the various timer 
features of the TV.
 
NIf you disconnect the power cord, 
you have to set the clock again.
To set the clock, follow these steps: 

1. 
Go  to  Clock screen ( System 
→  Time 
→  Clock
).
2.  
Select  Auto or Manual.
 
ΠIf you selected 
Auto:
The TV will automatically download 
the correct time from a digital 
channel.  
– Select Time Zone, and then select 
your Time Zone.
 
– Select DST (Daylight Savings 
Time). Select On if you want to  

turn the DST adjustment on and 
off manually. Select Off to turn off 
the DST adjustment.
 
NDST and  Time Zone function are 
only available when the Clock 
Mode is set to Auto .
 
ΠIf you selected 
Manual:
 
– The Clock Set screen appears. Set 
the Date
 and Time manually. You 
can set the current date and time 
using your remote. 

 
NAvailable only when Clock Mode  
is set to Manual.
 
●Sleep Timer
Automatically shuts off the TV after a 
preset period of time. (30, 60, 90, 120, 
150, or 180 minutes).
 
NSelect a period of time using your 
remote. To cancel the Sleep Timer , 
select  Off.
 
●On Timer
Set On Timer so that your TV turns on  

automatically at a time and on a day 
of your choosing. You can set up three 
separate On Timer configurations (On 
Timer 1, On Timer 2, On Timer 3) and 
select the source of the content the TV 
plays when it turns on: an air or cable 
channel, a USB device, or a set-top box 
connected to one of the TV's inputs 
(HDMI1, AV1, etc.).
 
NYou must set the clock before you 
can use the On Timer function.