Samsung Television UNES7150 User Manual

transmit an encrypted security code 
called an Access or Security Key. The 
Security Key is based on a Pass Phrase, 
typically a word or a series of letters 
and numbers of a specified length 
you were asked to enter when you set 
up wireless security for your wireless 
network.
If you use this method of setting up 
the network connection, and have a 
Security Key for your wireless network,  

you will have to enter the Pass Phrase 
during the automatic or manual setup 
process.
 
NDepending on your router or modem, 
you may be able to use a WPS PIN 
instead.
To set up your TV’s wireless network 
connection automatically, follow these 
steps: 1.  
Go to the Network Settings screen. 
(Network  
→  Network Settings) 

2. 
Select  Start. The network function 
searches for available wireless 
networks. When done, it displays a 
list of the available networks.
3.  
In the list of networks, select a 
network you want to connect to, and 
then select Next.
 
NIf the wireless router is set to 
Hidden (Invisible), you have to 
select  Add Network  and enter 
the correct Network Name (SSID)  

and Security Key to establish the 
connection.
4.  
If the Enter security key screen 
appears, go to step 5. If you selected 
a wireless router that does not have 
wireless security, go to step 7.
5.  
To set up wireless security, enter the 
Security Key or a  WPS PIN using the 
keyboard on the Enter security key 
screen.
 
NTo enter letters, highlight and  

select each letter. To enter 
numbers, highlight and select 
each number or press the number 
buttons on your remote.
 
N To shift to capital letters (or from 
capital letters to lower case), 
select the Caps or Shift button.
 
N To display symbols and 
punctuation, select 1
. To 
redisplay letters, select 1
 again.
 
N You should be able to find the  

Pass Phrase on one of the set up 
screens you used to set up your 
router or modem.
6.  
When done, select Next if you 
entered a Security Key or WPS PIN  
if you entered a PIN. The network 
connection screen appears and the 
verification process starts.
7.  
 When the connection has been 
verified, the " You are connected 
to the Internet. If you have any  

problems using online services, 
please contact your Internet Service 
Provider." message appears. Select 
OK.
 
NIf the network does not accept the 
Security Key or PIN, select Retry  
or select  IP Settings to enter the 
settings manually.
 
NIf you want to set up the connection 
manually, select  IP Settings. Then, go 
to the next section, “Manual Network  

Setup”.
Manual Wireless Network Setup You can configure your TV's wireless 
network connection manually when 
connecting your TV to a network that 
requires a Static IP address or if the 
automatic connection process has 
failed.
 
NTo get the IP address, subnet mask, 
gateway, and DNS values, contact 
your Internet Service Provider (ISP). 

To set up your TV's wireless network 
connection manually, follow these 
steps:1.  
Go to the Network Settings screen. 
(Network  
→  Network Settings)
2.  
Select  Start. The network function 
searches for available wireless 
networks. When done, it displays a 
list of the available networks.
3.  
In the list of networks, select a 
network you want to connect to, and  

then select Next.
 
NIf the wireless router is set to 
Hidden (Invisible), you have to 
select  Add Network  and enter 
the correct Network Name (SSID) 
and Security Key to establish the 
connection.
4.  
If the Enter security key screen 
appears, go to step 5. If you select 
a wireless router that does not have 
wireless security, go to step 7.