Samsung Television UNES7150 User Manual

 
NThe rating titles (For example: 
Humor Level..etc) and TV ratings 
(For example: DH, MH, H..etc) may 
differ depending on the broadcasting 
station.
 
●Change PIN
The Change PIN  screen will appear. 
Choose any 4 digits for your PIN 
and enter them in the Enter New PIN  
fields. Re-enter the same 4 digits in 
the Confirm New PIN  fields. When  

the Confirm screen disappears, select 
Close. The TV has memorized your new 
PIN.
How to watch a restricted program or 
movie
If the TV is tuned to a restricted 
program or movie, the Program Rating 
Lock will block it. 
The screen will go blank and a pop-
up message appears. Enter the PIN to 
unblock the program or movie using  

your remote.
 
NIf you forget the PIN code, press 
the remote control buttons in the 
following sequence in Standby 
mode:   MUTE
M 
→  8 
→ 2 
→ 4 
→ 
P  
(power on). This resets the PIN to “0-
0-0-0”. 

Economical SolutionsEco Solution
Menu  → System
 
→  Eco Solution
 
●Energy Saving
Lets you adjusts the brightness of 
the TV in order to reduce power 
consumption. If you select Picture Off , 
the screen is turned off, but the sound 
remains on. Press any button except 
the volume button to turn on the 
screen. 

 
●Eco Sensor
To enhance power savings, the picture 
settings will automatically adapt to the 
light in the room.
 
NIf you adjust Backlight   for LED TV  / 
Cell Light 
 for PDP TV  in the Picture 
menu, the Eco Sensor is set to Off 
automatically.
Min. Backlight  
 for LED TV  / Min Cell 
Light 
for PDP TV : When the Eco Sensor 
is set to On, you can manually adjust  

the minimum screen brightness.
 
NIf the Eco Sensor is set to  On, the 
display brightness may change 
(become slightly darker or brighter) 
depending on the light intensity 
in your room. You can control the 
screen’s minimum brightness with 
the Min. Backlight  / Min Cell Light 
function.
 
●No Signal Power Off
To avoid unnecessary energy  

consumption, you can set how long 
you want the TV to remain on if it’s not 
receiving a signal.
 
●Auto Power Off
The TV will automatically turn off when 
no user operation is detected for 4 
hours. 

Picture In Picture (PIP)PIP
Menu  → System
 
→  PIP
You can watch a program whose signal 
has passed through the TV’s tuner and 
watch video from one external video 
source simultaneously. 
For example, if you have a cable box 
connected to the Cable In jack, you can 
use PIP to watch programs from the 
cable box and a movie from a Blu-ray  

player attached to the HDMI In jack.
 
NWhile Smart Hub  or Program Rating 
Lock  is on, you cannot use PIP .
 
●PIP
Activate or deactivate the PIP  function.
 
●Air/Cable
Select either Air  or Cable as the input 
source for the sub-picture screen.
 
●Channel
Select the channel for the sub-picture 
screen. 

 
●Size
Select a size for the sub-picture screen.
 
●Position
Select a position for the sub-picture 
screen.
 
●Sound Select
You can choose to listen to the sound 
from the main picture or the sub 
picture.
 
NIf you turn the TV off while watching 
in the PIP  mode, the PIP  function is