Samsung Television UN75ES9000F User Manual
Have a look at the manual Samsung Television UN75ES9000F User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 439
You will have [TWENTY] seconds to
complete the test. Repeat the phrase
with a loud and clear voice.
When the TV recognizes you it will
show the Voice Control Test Complete
screen. Select OK to finish.
Voice Control is now enabled and
configured on your Samsung Smart TV.
To disable Voice Control go to the Voice
Control menu, choose Voice Control and](http://img.usermanuals.tech/thumb/66/98116/w64_UN75ES9000F_Manual_d-438.png "Page 439
You will have [TWENTY] seconds to
complete the test. Repeat the phrase
with a loud and clear voice.
When the TV recognizes you it will
show the Voice Control Test Complete
screen. Select OK to finish.
Voice Control is now enabled and
configured on your Samsung Smart TV.
To disable Voice Control go to the Voice
Control menu, choose Voice Control and")
2. Say a word or phrase listed in the Voice Command Bar. NPronounce the word or phrase clearly and correctly in the language you selected in Language. 3. Wait until recognition is complete, and then say the next command in the same fashion. NTo exit the Voice Control mode, speak the Trigger
Words or "Cancel" using the TV's microphone, or press the RETURNR button. NPlease note that in some cases, if your Voice Control function is set to On, your TV may be inadvertently turned on by ambient noise in your surrounding area. If this is a concern for you, you should turn Off the Voice Control functionality.
Using the Voice Text Input Mode1. Say "Search All" while in the Voice Control mode. 2. Say the word or phrase you wish to search for. 3. The TV executes the spoken function. NVoice Text Input Mode performance may vary depending on the language spoken, your pronunciation, the volume of your voice and your surrounding environment, including
ambient noise levels. Motion Control Menu → System → Voice and Motion Control → Motion Control Motion Control works with the Smart TVs built-in camera and allows you to use motion to open apps in Smart Hub, navigate web pages, and control certain TV functions. NMotion Control function can be
affected by your posture, your hand position, or ambient brightness conditions. NSome applications may not support Motion Control. NYou may experience physical fatigue when you use the Motion Control for extended periods. NWhen you use Motion Control, please avoid direct sunlight. NWe recommend using Motion
Control function within about 5 – 13 ft with your TV. The TV Camera's recognition range may differ depending on the angle of camera or other conditions. Because Motion Control works with the built-in camera on top of the Smart TV, it is important that you are within the sightline of the TV Camera and nothing is obstructing its view of you. If the TV Camera is facing too high, or too low, you can adjust it using the dial
on the back of the TV. Motion Control works best in a well lit room. For best results, be sure the light in the room is illuminating the front of you. The TV Camera is looking for movement, so there should be contrast between you and the background. Before using Motion Control recommended to run a Motion Control Environment Test (as described below) which measures the ambient light in the room, and ensures
the built-in TV Camera is able to see you. (System → Voice and Motion Control → Motion Control → Motion Control Environment Test ). ●Motion Control Turns the Motion Control function on or off. ●Motion Guide Bar Size Set the Motion Guide Bar Size mode to Minimum or Full.
●Motion Control Environment Test Brightness Test: In order for Motion Controls to work there must be sufficient light in the room. The Brightness Test measures the ambient light in the room. Stand or sit no more than 13 feet away from your TV and select the start option. The Brightness Test will begin and should take about 10 seconds. If there is not sufficient light in the room you will get a prompt
that reads Brightness Test failed. This means that it is too dark for Motion Control to see your movements. It is suggested that you increase the brightness in your room. Also, check the angle of the camera to be sure it is facing out at you. Rotate the camera angle dial located on the back of the camera. After checking these things, select retest. If there is enough light in the room the prompt will read