Samsung Television UN75ES9000F User Manual
Have a look at the manual Samsung Television UN75ES9000F User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
To set up your TV's wired network connection manually, follow these steps:1. Go to the Network Settings screen. (Network → Network Settings) 2. Select Start. The network connection screen appears and the verification process starts. 3. Select Stop. The verification process stops. Select IP Settings on network connection screen. The IP Settings
screen appears. 4. Select the IP Setting, and then set the IP Setting to Enter manually . 5. Go to the IP Address entry field, and then select the IP Address using remote. 6. Enter the first portion of the IP Address (for example, 105) into the first entry field using your remote. When done, go to the next field. 7. Enter the next portion of the IP
Address. When done, go to the next field. 8. Repeat the entry process for each field in the IP Address. NIf you make a mistake when entering a number, re-enter the number to correct it. 9. When done, go to the Subnet Mask fields. 10. Repeat the same entry process for Subnet Mask, Gateway , and DNS
Server. 11. When done, select OK. The network test screen appears and the verification process starts. When the connection has been verified, the You are connected to the Internet. If you have any problems using online services, please contact your Internet Service Provider. message appears. Network Status Menu → Network → Network Status
You can check the current network and Internet status. When the wired network connection failed... ●No network cable found. Check that your network cable is plugged in. If it is connected, make sure that the router is turned on; if it is on, try turning if off and on again. ●IP auto setting failed. Try the following to set your IP address automatically. Or set your IP address
manually by selecting IP Settings. - Ensure DHCP server is enabled on router and unplug and re-plug-in the router. - Contact your Internet Service Provider for more information. ●Unable to connect to the network. Try the following: check if your IP address is set correctly in IP Settings. Contact your Internet Service Provider for more information. ●Connected to your local network, but
cannot connect to the Internet. Check the DNS settings in IP Settings, or contact your Internet Service Provider to access the Internet. ●Network setup complete, but cannot connect to the Internet. Contact your Internet Service Provider to access the Internet.
Setting up the Wireless Network Network Settings Menu → Network → Network Settings Set the wired or wireless network connection to use various Internet services such as Smart Hub, AllShare Play and perform software upgrades. Automatic Wireless Network Setup Most wireless networks have an optional security system that requires devices that access the network to
transmit an encrypted security code called an Access or Security Key. The Security Key is based on a Pass Phrase, typically a word or a series of letters and numbers of a specified length you were asked to enter when you set up wireless security for your wireless network. If you use this method of setting up the network connection, and have a Security Key for your wireless network,
you will have to enter the Pass Phrase during the automatic or manual setup process. To set up your TV’s wireless network connection automatically, follow these steps:1. Go to the Network Settings screen. (Network → Network Settings) 2. Select Start. The network function searches for available wireless networks. When done, it displays a