Samsung Television UN55ES7500F User Manual

in the Main menu:  
ΠBacklight
 
 for LED TV  / Cell Light  
for PDP TV 
, Contrast , Brightness, 
Sharpness, Color , Tint (G/R) and so 
on. Go in to  Picture on user Menu 
then try adjusting options mentioned 
above.
Blur If you find that there is a blur or 
“ghostlike” appearance to the images 
on your television’s screen, you might  

be able to correct the blurring using 
Auto Motion Plus.
 
●Auto Motion Plus:  Picture 
→ Picture 
Options  → Auto Motion Plus
Unwanted Powering Off If your Samsung TV appears to turn off 
by itself, there may be an issue with 
either your Timer settings or your Eco 
friendly No Signal Power Off feature.
First make sure Sleep Timer is not 
accidentally set. The Sleep Timer turns  

off the TV automatically after a certain 
period of time has passed. 
ΠSleep Timer: 
System 
→  Time 
→ 
Sleep Timer
If the Sleep Timer is not activated, you 
may have engaged the No Signal Power 
Off or Auto Power Off feature.  
ΠNo Signal Power Off: 
System 
→  Eco 
Solution  → No Signal Power Off
 
ΠAuto Power Off: 
System 
→  Eco 
Solution  → Auto Power Off 

Trouble Powering OnPress the power on button on the TV or 
remote and the light should blink about 5 
times before the TV turns on.
If you find that you are having trouble 
powering on your Samsung television, 
there are a number of things to check 
before making a call to the service 
department.
If you’re sure your power cord, remote 
control, and PC are functioning  

properly, you may be having a cable 
issue. If you have a cable or satellite 
box, your TV may appear to be off 
because the cable or satellite box is not 
outputting a signal. To test the signal 
output of your cable or satellite box, 
press the guide or info button on the 
cable or satellite box remote control. If 
the screen displays the guide or info 
data, the problem is caused by the box.
Stand Assembly 

If you have any trouble assembling the 
stand, visit www.samsung.com/spsn.
Cannot Find a Channel Re-run Setup (Go to  System 
→  Setup) 
or run Auto Program. (Go to  Channel 
→ 
Auto Program).
 
NWatch these troubleshooting on video at 
www.samsung.com/spsn 

Picture (Troubleshooting)First, perform the Picture Test and to 
see if your TV is properly displaying 
the test image (go to  Support 
→ Self 
Diagnosis  → Picture Test).
If the test image is properly displayed, 
the poor picture may be caused by the 
source or signal.
The TV image does not look as good as it 
did in the store. Store displays are all tuned to digital,  

HD (high definition) channels.
If you have an analog cable/set top 
box, upgrade to a digital set top box. 
Use HDMI or Component cables to 
deliver HD (high definition) picture 
quality.
 
NMany HD channels are up scaled 
from SD (Standard Definition) 
contents. Look for a channel that is 
broadcasting true HD content.
 
ΠCable/Satellite subscribers: Try HD  

channels from the channel line up.
 
ΠAir/Cable Antenna connection: Try 
HD channels after performing an 
Auto Program.
Adjust the Cable/Sat box video output 
resolution to 1080i or 720p.
The picture is distorted: macro block error, 
small block, dots, pixelization The compression of video contents 
may cause picture distortion especially 
in fast moving pictures such as sports  

and action movies.
A weak or bad quality signal can cause 
picture distortion. This is not a TV 
issue.
Mobile phones used close to the TV 
(within 3.3 ft) may cause noise in the 
picture on analog and digital channels.
Color is wrong or missing. If you’re using a Component 
connection, make sure the component 
cables are connected to the correct