Samsung Television UN55ES7500F User Manual

Anynet+ (HDMI-CEC) Menu
The Anynet+ menu changes depending 
on the type and status of the Anynet+ 
devices connected to the TV.
 
●View TV
Changes Anynet+ mode to TV 
broadcast mode.
 
●Device List
Shows the Anynet+ device list.
 
●(device_name)  Menu
Shows the menu of the connected  

device menus. E.g. if a DVD player is 
connected, the disc menu of the DVD 
player will appear.
 
●(device_name)  Tools
Shows the tools menu of the 
connected device. E.g. if a DVD 
player is connected, the tools menu 
of the DVD player will appear.
 
NDepending on the device, this 
menu may not be available.
 
●(device_name)  Title Menu 

Shows the title menu of the disc in 
the connected device. E.g. If a DVD 
player is connected, the title menu 
of the movie in the DVD player will 
appear.
 
NDepending on the device, this 
menu may not be available.
 
●Receiver
Sound is played through the receiver.
Setting up Anynet+ (HDMI-CEC)
 
●Anynet+ (HDMI-CEC) 

To use the Anynet+ Function, Anynet+ 
(HDMI-CEC) must be set to On.
 
NWhen the Anynet+ (HDMI-CEC)  
function is disabled, all the Anynet+ 
related operations are deactivated
 
●Auto Turn Off
Set an Anynet+ Device to turn off 
automatically when the TV is turned 
o f f.
 
NIf the Auto Turn Off is set to Ye s , 
running external devices will turn off  

at the same time as the TV powers 
o f f.
 
NMay not be enabled depending on 
the device.
 
●Receiver
You can listen to sound through a 
receiver (i.e. Home Theater) instead of 
the TV Speaker.
Switching between Anynet+ Devices 1. 
Open  the  Tools menu using your 
remote, and then select Anynet+  

(HDMI-CEC).
2.  
Select  Device List. The Device List 
screen appears.
 
NIf you cannot find a device you 
want, select Refresh  to refresh the 
list.
3.  
Select a device, and then wait until 
switch to the selected device.
 
NThe Device List menu appears 
only when you set Anynet+ 
(HDMI-CEC) to On in the System  

menu.
 
NSwitching to the selected device 
may take up to 2 minutes. You 
cannot cancel the switching 
operation while switching is in 
progress.
 
NIf you have selected an Anynet+ 
device using  Source function and 
then selecting its input source, 
you cannot use the Anynet+ 
function. Make sure to switch to  

an Anynet+ device by using the 
Device List.
Listening through a  Receiver
You can listen to sound through a 
receiver (i.e. Home Theater) instead 
of the TV Speaker. To listen to sound 
through a receiver, go to  Receiver 
screen ( System 
→  Anynet+ (HDMI-
CEC)  
→  Receiver
). Then select Receiver  
and set to  On.
 
NIf your receiver supports audio only,  

it may not appear in the device list.
 
NThe receiver will work when you 
have properly connected the optical 
in jack of the receiver to the  DIGITAL 
AUDIO OUT (OPTICAL)  port of the TV.
 
NWhen the receiver (i.e. Home Theater) 
is set to On, you can hear sound 
output from the TV’s Optical jack. 
When the TV is displaying a DTV 
(air) signal, the TV will send out 5.1 
channel sound to the receiver. When  

the source is a digital component 
such as a DVD player and it is 
connected to the TV via HDMI, you 
will hear only 2 channel sound from 
the receiver.
Using the ARC function You can listen to sound through a 
receiver connected using an HDMI cable 
without connecting a separate optical 
cable. To listen to sound through a 
receiver using the ARC function, go to