Samsung Television UN48H5500 User Manual

154155
Picture Support Functions
PIP Broadcast Viewing
MENU > Picture >  PIP Try Now
Watch video from an external device such as a Blu-ray player on the main screen while viewing a TV 
broadcast in a picture-in-picture window.
Select  Picture >  PIP to display the PIP settings window. The PIP settings window contains the 
following options: 
 
●PIP
Activates/deactivates PIP.
 
●Antenna
Choose Air  or Cable as the input source for the PIP sub-picture window.
 
●Channel
Selects the PIP sub-picture...

156
Changing the Picture Size and Position
Choosing the Right Screen Size Try Now
MENU > Picture >  Picture Size >  Picture Size
Most TV programs and videos are displayed in full screen, but some programs and videos are 
displayed in sizes that are larger or smaller. You can change the screen size for such programs and 
videos so that the picture fits the screen better.   
"
Supported screen sizes vary depending on the input signal. Refer to the " Picture Sizes and Input Signals" 
section for...

156157
Adjusting the Screen Position Try Now
MENU > Picture >  Picture Size >  Position
Adjusts the screen position.  
"
This option is only available with  Size set to Zoom1, Zoom2, Wide Fit , or Screen Fit . When the TV is tuned 
to a digital channel, the screen position cannot be adjusted if the Picture Size is set to Screen Fit .
11 To adjust the screen's position, select Picture > Picture Size >  Position. A popup window 
appears.
21 Select  Position  again from the popup window.
31 Press...

158
Changing the Sound Mode and Using Sound Effects
Choosing the Right Sound Mode for the Environment
MENU > Sound >  Sound Mode Try Now
Sound modes apply preset adjustments to the sound output, optimized for different viewing and 
listening circumstances.
 
"
The sound modes cannot be used when you are listening to audio through external speakers.
 
●
Standard
This is the normal sound mode.
 
●Music
This mode emphasizes normal music instead of voices.
 
●Movie
This mode is calibrated to provide the...

158159
Sound Support Functions
Selecting Speakers
MENU > Sound >  Speaker Settings  > TV Sound Output  Try Now
TV Sound Output lets you choose which speakers the TV uses for audio output. Select  Sound > 
Speaker Settings  > TV Sound Output  and then select the speakers from the list. To listen to audio 
through the TV's speakers and the speakers of a connected AV receiver or home theater simultaneously, 
select TV Speaker. If this causes an echo effect, choose any speaker option other than  TV...

160
Designating the TV's Installation Type
MENU > Sound >  Speaker Settings  > TV Installation Type
Specify the TV's installation type. Choose between  Wall Mount and Stand  to optimize the TV's sound 
automatically.
Listening to TV Sound through Samsung Bluetooth Audio
MENU  > Sound >  Speaker Settings  > TV SoundConnect
This function is only available with the LED 6400 series and higher.
Connect the TV to a Samsung audio device for a richer, clearer sound.  
"
This option is only...

160161
Listening to TV Sound through Samsung Multiroom Link 
compatible Speakers
MENU > Sound >  Speaker Settings  > Multiroom Link
Configure this product for connection to a Samsung Multiroom Link compatible speaker and enjoy rich 
sound.  
"
To use this feature, at least one Samsung Multiroom Link compatible speaker must be connected.
 
"Sound quality may be affected by the condition of the wireless network.
 
"Network connection status can be negatively influenced and even can be lost, if...

162
Enabling Digital Audio Output
MENU > Sound >  Additional Settings  Try Now
This Smart TV is SPDIF-enabled. The Sony Philips Digital Interface (SPDIF) provides digital audio 
output to speakers and various digital devices, including A/V Receivers and home theaters.
 
●Audio Format Try Now
Selects the Digital Audio output (SPDIF) format. The available Digital Audio output (SPDIF) 
formats may vary depending on the input source.
 
●Audio Delay  Try Now
This setting helps correct timing mismatches...

163
Setting the Time and Using the Timer
Setting the Current Time
MENU > System >  Time > Clock Try Now
Set the clock manually or automatically.
To view the time after the clock is set, press the INFO  button on your remote.
 
–LED 7100 series  : To view the time after the clock is set, select the INFO  button on the On- 
Screen Remote. (KEYPAD >  INFO)
 
"
The clock must be reset every time the power is disconnected.
Setting the Clock using Digital Broadcast Info
MENU  > System >  Time > Clock >...

164
If the Clock is Wrong in Auto Mode...
MENU > System >  Time > Clock > Time Offset Try Now
If the time set automatically is incorrect, you can offset the clock in 1-hour increments by as much as 
-/+ 12 hours. Select  System > Time > Clock > Time Offset, and then offset the clock to the correct 
time.
 
"
Time Offset adjusts the time through a network connection and is only available if the Clock Mode  is set to 
Auto and the TV is connected to the Internet though a local area network.
 
"Time...