Samsung Television UN48H5500 User Manual

144145
Selecting the Broadcast Audio Language (Analog)
 
●Listening to Multi-Track Sound Try Now
Select  Audio Options  > Multi-Track Sound. Configure the audio for the current broadcast.  Multi-
Track Sound can be set to mono or stereo, depending on the broadcast signal or program. 
However, this option is automatically set to mono if the broadcast signal or program does not 
support stereo.
 
"
Press the INFO  button to view the current broadcast's audio signal information.
 
"For the LED...

146
Changing the Picture Mode and Adjusting the Picture 
Quality
Choosing the Right Picture Mode for the Viewing Environment
MENU > Picture >  Picture Mode  Try Now
The following picture modes utilize different contrast and brightness settings to provide the best 
viewing experience for the environment.
 
"
Navigate to Edit Name , if you use the PC setting for PC or DVI PC, you can only available Standard and 
Entertain .
 
●
Dynamic
If the ambient lighting is too bright and makes the screen blurry,...

146147
Adjusting the Picture Quality for Each Picture Mode
MENU > Picture
Select one of the settings below from the Picture menu to display the slide bar for the selected 
setting. Adjust the value by pressing the  ¡ or 
£ button on your remote. Choose a different setting by 
pressing the  < or 
> button. Adjusted values are applied to the current source and picture mode.
 
"
The Color and Tint (G/R)  settings cannot be adjusted when the TV is connected to a computer via an HDMI 
to DVI cable.
Choose...

148
Applying the Current Picture Settings to Other Input Sources Try Now
MENU > Picture >  Apply Picture Mode
You can apply the picture quality setting that you configured for the TV to all external devices 
connected to the TV or to the current source only.
To apply the setting to all external devices connected to the TV, select  All Sources. To apply the 
setting to the current input only, select  Current Source.
Fine-Tuning Each Picture Mode ( Advanced Settings)
MENU > Picture >  Advanced Settings Try...

148149
 
●Color Space
For the LED 5500 series models, Custom is not supported.
Adjusts the range of colors (the color space) that the TV can display. Auto automatically adjusts 
the color space depending on the input signal.  Native applies a range that is wider than the input 
signal.  Custom allows you to adjust the color space manually.
 
●White Balance
 
–For the LED 5500 series models
You can adjust the color temperature of the picture to make white objects look white, and the 
overall picture...

150
Adjusting the Picture for Easier Viewing (Picture Options)
MENU > Picture >  Picture Options  Try Now
Select Picture >  Picture Options  to make additional adjustments for a better viewing experience.
 
"
When the TV is connected to a computer via an HDMI-DVI cable, only Color Tone can be adjusted.
Choose a Picture Mode  and then adjust the settings.
 
●Color Tone Try Now
Adjusts the color tone. The setting is applied on an individual Picture Mode  basis. When 
you select a new  Picture Mode, the...

150151
 
●Film Mode Try Now
Optimizes the picture quality for movies. Select this mode for watching movies.
 
"
This feature is only available when you are watching a TV broadcast or when the input signal is AV, 
Component (480i, 1080i), or HDMI (1080i).
 
●
Auto Motion Plus
This function is only available with the LED 6300 series and higher.
Removes blurring and judder from scenes with rapid movement. If you select  Custom, you can 
configure Blur Reduction and Judder Reduction manually and set  LED...

152
Viewing in 3D
MENU > Picture >  3D
This function is only available with the LED 6400 series and higher.
The 3D option lets you view 3D media content and broadcasts. You will need to wear Samsung 3D 
Active Glasses to play 3D content. IR-type Samsung 3D Active Glasses and third-party 3D glasses are 
not supported.  
"
Carefully read the health and safety information concerning 3D viewing before viewing 3D content. Refer to 
the " 3D Precautions " section for more information....

152153
Changing the 3D Mode
MENU > Picture >  3D > 3D Mode
11 Press the 3D button on your remote to start the 3D function, and then select  3D Mode under 
Picture >  3D.
 
"
For the LED 6800 model, navigate to MENU  > Picture to select 3D.
21 Choose from the 3D modes that appear on the screen. The supported 3D Modes may vary 
depending on the 3D content.
 
"
3D Mode is automatically configured for most 3D content.
The following 3D Modes are available. However, mode availability may vary depending...

154
Adjusting the 3D Effect
MENU > Picture >  3D
Configure the viewpoint, depth, and other 3D settings for a custom viewing experience.  
"
All 3D effects with the exception of 3D Auto View can only be used while watching 3D content.
 
●
Adjusting the 3D Viewpoint
Select  Picture >  3D > 3D Perspective . Use the adjustment bar shown on the screen to adjust the 
viewpoint.
 
●Adjusting the 3D Depth
Select  Picture >  3D > Depth . Use the adjustment bar shown on the screen to adjust the depth.
 
"...