Samsung Television PNF5300 User Manual

 
❑
Changing the Preset Sound Modes
 
■
Sound Mode
 
O
MENU m 
→  Sound 
→ Sound Mode 
→ ENTER
E
Use	the	 ▲/▼	buttons	to	select	an	option,	and	then	press	ENTER
E.
	
●Standard:	Selects	the	normal	sound	mode.
	
●Music:	Emphasizes	music	over	voices.
	
●Movie:	Provides	the	best	sound	for	movies.
	
●Clear Voice:	Emphasizes	voices	over	other	sounds.
	
●Amplify:	Increase	the	intensity	of	high-frequency	sounds	to	allow	a	better	
listening	experience	for	the	hearing	impaired.
	
NIf	Speaker Select	is	set	to...

 
❑
Adjusting Sound Settings
 
■
Sound Effect
 
O
MENU m 
→  Sound 
→ Sound Effect 
→ ENTER
E
(standard	sound	mode	only)
Use	the	 ▲/
▼ 	buttons	to	select	an	option,	and	then	press	ENTER
E.
	
●DTS TruSurround
This	function	provides	a	virtual	5.1	channel	surround	sound	experience	
through	a	pair	of	speakers	or	headphones	using	HRTF	(Head	Related	Transfer	
Function)	technology.
	
●DTS TruDialog
This	function	allows	you	to	increase	the	intensity	of	a	voice	over	background	
music	or	sound	effects	so	that...

	
●Equalizer
Use	Equalizer	to	customize	the	sound	setting	for	each	speaker.
Balance:	Adjusts	the	balance	between	the	right	and	left	speaker.
100Hz / 300Hz / 1kHz / 3kHz / 10kHz	(Bandwidth	Adjustment):	Adjusts	the	
volume	level	of	specific	bandwidth	frequencies.
Reset:	Resets	the	equalizer	to	its	default	settings.
	
NIf	Speaker Select	is	set	to	External Speaker,	Sound Effect	is	disabled.
English
$#  

 
■
3D Audio
  for PDP 4900 / LED 6100 series  
 
OMENU m 
→  Sound 
→ 3D Audio 
→ ENTER
E
3D	audio	technology	that	provides	an	immersive	sound	corresponding	to	the	
effect	of	3D	video	by	utilizing	audio	depth	control	in	perspective.
	
NAvailable	in	only	when	the	TV	is	displaying	3D	images.
English
$#  

 
■
Speaker Settings
 
O
MENU m 
→  Sound 
→ Speaker Settings 
→ ENTER
E
	
●Speaker Select
If	you	are	listening	to	the	sound	track	of	a	broadcast	or	movie	through	an	
external	receiver,	you	may	hear	a	sound	echo	caused	by	the	difference	in	
decoding	speed	between	the	TV’s	speakers	and	the	speakers	attached	to	
your	audio	receiver.	If	this	occurs,	set	the	TV	to	External Speaker.
	
NWhen	you	set	Speaker Select	to	External Speaker,	the	TV’s	speakers	
are	turned	off.	You	will	hear	sound	through	the	external...

	
NWhen	Speaker Select	is	set	to	External Speaker,	the	 VOLUME	and	
MUTE	buttons	will	not	operate	and	the	sound	settings	will	be	limited.
	
NIf	there	is	no	video	signal,	both	the	TV’s	speakers	and	the	external	
speakers	will	be	mute.
	
●Auto Volume
Normal	equalizes	the	volume	level	on	each	channel,	so	that	when	you	change 	
channels,	the	volume	level	is	the	same.
Night	equalizes	and	decrease	the	volume	level	on	each	channel,	so	each	
channel	is	quieter.	Night	is	useful	at	night,	when	you	may	want	to	keep...

 
■
Digital Audio Out
 
O
MENU m 
→  Sound 
→ Digital Audio Out 
→ ENTER
E
Digital	Audio	Out	outputs	an	uncompressed	digital	audio	signal	when	you	connect 	
the	digital	audio	out	jack	on	the	back	of	the	TV	to	a	digital	audio	in	jack	on	a	
receiver	or	home	theater.
	
●Audio Format:	You	can	select	the	Digital	Audio	output	format.	The	available	
Digital	Audio	output	format	may	differ	depending	on	the	input	source.
	
NBy	connecting	the	TV	to	a	receiver	or	home	theater	with	Dolby Digital	
and	5.1ch	speakers...

	
●Audio Delay:	Lets	you	correct	timing	mismatches	between	the	audio	track	
and	the	video	when	you	are	watching	the	TV	and	listening	to	digital	audio	
output	from	the	TV	through	an	external	device	such	as	an	AV	receiver.	When	
you	select	Audio Delay,	a	slider	appears.	Use	the	 ◄/
► 	buttons	to	adjust	the	
slider,	from	0ms	~	250ms.	Press	ENTER E	when	done.
English
$#  

 
■
Reset Sound
 
O
MENU m 
→  Sound 
→ Reset Sound 
→ ENTER
E
Reset	all	sound	settings	to	the	factory	defaults.	Select	Reset Sound,	press	
ENTER E,	select	Ye s
	in	the	pop-up,	and	then	press	ENTER
E	again.
English
$#  

 
❑
Executing initial setup
 
■
Setup
 
O
MENU m 
→  System 
→ Setup 
→ ENTER
E
Configure	the	channels	and	set	the	time	when	you	set	up	the	TV	for	the	first	time	
or	when	you	reset	the	TV.
	
NTo	execute	the	initial	setup,	follow	the	instructions	displayed	on	the	TV	
screen.
English
Preference	Features
$#