Samsung Television PNF5300 User Manual

 
❑
Setting the Time
 
■
Time 
 
O
MENU m 
→  System 
→ Time 
→ ENTER
E
	
NThe	current	time	will	appear	every	time	you	press	the	INFO	button.
	
●Clock:	Set	the	clock	to	use	the	various	timer	features	of	the	TV.
	
NIf	you	disconnect	the	power	cord,	you	have	to	set	the	clock	again.
Clock Mode:	Set	the	current	time	manually	or	automatically.
	
●Auto:	The	TV	sets	the	current	time	automatically	using	the	time	from	a	
digital	channel.
	
NYou	must	have	cable	or	an	antenna	connected	to	the	TV	to	set	the	
time...

Clock Set:	Set	the	Date	and	Time.
Select	Clock Set.	Select	Date	or	Time,	and	then	press	ENTERE.	Use	the	
number	buttons	or	the	 ▲/
▼ 	buttons	to	enter	numbers.	Use	the	
◄/
► 	buttons	
to	move	from	one	entry	field	to	the	next.	Press	ENTER E	when	done.
	
NAvailable	only	when	Clock Mode	is	set	to	Manual.
DST:	Switches	the	DST	(Daylight	Saving	Time)	function	on	or	off.
	
NThis	function	is	only	available	when	the	Clock Mode	is	set	to	Auto.
Time Zone:	Select	your	time	zone.
	
NThis	function	is	only	available...

 
❑
Using the Sleep Timer
 
OMENU m 
→  System 
→ Time 
→ Sleep Timer 
→ ENTER
E
	
●Sleep Timer	
t:	Automatically	shuts	off	the	TV	after	a	preset	period	of	
time.	(30,	60,	90,	120,	150	and	180	minutes).
	
NUse	the	 ▲/
▼ 	buttons	to	select	a	period	of	time,	and	then	press	
ENTER E.	To	cancel	the	Sleep Timer,	select	Off
.
English
$#  

 
❑
Setting the On/Off Timer
 
OMENU m 
→  System 
→ Time 
→ On Timer
  Off Timer
 → ENTER
E
Set	On Timer	so	that	your	TV	turns	on	automatically	at	a	time	and	on	a	day	of	
your	choosing.
	
●On Timer:	You	can	set	up	three	separate	On Timer	configurations.
	
NYou	must	set	the	clock	before	you	can	use	On Timer.
Setup:	Select	Off ,	Once,	Everyday,	Mon~Fri,	Mon~Sat,	Sat~Sun or 
Manual.	If	you	select	Manual,	you	can	choose	the	days	you	want	On Timer	
to	turn	on	your	TV.
	
NThe	 c	mark	indicates	days	you’ve...

Time:	Set	the	hour,	minute,	am/pm.	Use	the	number	buttons	or	the	▲/
▼ 	
buttons	to	enter	numbers.	Use	the	 ◄/
► 	buttons	to	change	entry	fields.
Volume:	Set	the	desired	volume	level.	Use	the	 ◄/
► 	buttons	to	change	the	
volume	level.
Source:	To	select	the	source	of	the	content	that	will	play	when	the	TV	turns	
on.	You	can:
	
●Select	TV	and	have	the	TV	display	a	specific	air	or	cable	channel.
	
●Select	USB	and	have	the	TV	play	back	photo	or	audio	files	from	a	USB	
device.
	
●Select	a	source	on	your	TV	to...

	
NIf	you	select	a	source	other	than	TV	or	USB,	you	must:
	
●Have	a	cable	or	satellite	set-top	box	attached	to	that	source
	
●Set	the	set-top	box	to	the	channel	you	want	to	watch	when	the	TV	
goes	on
	
●Leave	the	set-top	box	turned	on.
	
NWhen	you	select	a	source	other	than	TV	or	USB,	the	Antenna	and	
Channel	options	will	disappear.
Antenna	(when	the	Source	is	set	to	TV):	Select	Air	or	Cable.
Channel	(when	the	Source	is	set	to	TV):	Select	the	desired	channel.
Music / Photo	(when	the	Source	is	set	to...

	
NIf	there	is	no	music	file	on	the	USB	device	or	you	don’t	select	a	folder	
containing	a	music	file,	the	Timer	function	does	not	operate	correctly.
	
NIf	there	is	only	one	photo	file	in	the	USB,	the	Slide	Show	will	not	play.
	
NA	folder	with	a	name	that	is	too	long	cannot	be	selected.
	
NEach	USB	device	you	use	is	assigned	its	own	folder.	When	using	more	
than	one	of	the	same	type	of	USB	device,	make	sure	the	folders	assigned 	
to	each	USB	device	have	different	names.
	
NWe	recommend	that	you	use	a	USB...

	
●Off Timer:	You	can	set	up	three	separate	Off Timer	configurations.
	
NYou	must	set	the	clock	before	you	can	use	Off Timer.
Setup:	Select	Off , Once, Everyday , Mon~Fri, Mon~Sat, Sat~Sun	or	
Manual.	If	you	select	Manual,	you	can	choose	the	days	you	want	Off Timer	
to	turn	off	your	TV.
	
NThe	 c	mark	indicates	days	you’ve	selected.
Time:	Set	the	hour,	minute,	and	am/pm.	Use	the	number	buttons	or	the	 ▲/
▼ 	
buttons	to	enter	numbers.	Use	the	 ◄/
► 	buttons	to	change	entry	fields.
English
$#  

 
❑
Economical Solutions
 
■
Eco Solution
 
O
MENU m 
→  System 
→ Eco Solution 
→ ENTER
E
	
●Energy Saving:	Lets	you	adjust	the	brightness	of	the	TV	in	order	to	reduce	
power	consumption.
	
●Eco Sensor:	To	enhance	your	power	savings,	the	picture	settings	will	
automatically	adapt	to	the	light	in	the	room.
	
NIf	you	adjust	Backlight	  for LED TV   / Cell Light	  for PDP TV  	in	the	Picture	
menu,	Eco Sensor	is	set	to	Off .
English
$#  

Min. Backlight   for LED TV   / Min Cell Light   for PDP TV  :	When	Eco Sensor	is	
On,	lets	you	manually	adjust	the	minimum	screen	brightness.
	
NIf	Eco Sensor	is	On,	the	display	brightness	may	change	(become	
slightly	darker	in	most	cases)	depending	on	the	surrounding	light	
intensity.	You	can	control	the	screen’s	minimum	brightness	with	the	Min. 
Backlight 
  for LED TV   / Min Cell Light   for PDP TV  	function.
	
●No Signal Power Off :	Sets	how	quickly	the	TV	switches	to	standby	mode	if	
it	is...