Samsung Syncmaster Vc240 User Manual

							4.5 Recent-Call Log
Deleting a Call from the Call Log
...
1 Select a call from the call log, and press .
...
2 Select Delete .
Select OK. The call will be deleted. ...
3
To delete all the calls from the call log, select
Delete All.
SelectOK. All the calls in the call log will be deleted.
...
4 To delete more than one call from the call log at the same time, select
the calls and press
. The selected calls will be indicated by a .
...
5
After selecting all the calls you want to delete, press with the last
◀ 37 ▶          
						

							4.5 Recent-Call Log
selected call highlighted, and select
Delete.
Select OK. The selected calls will be deleted from the call log. Making a Call
Select a call from the call log, and press .
Alternatively, press and selectCall.
◀ 38 ▶   
						

							4.6 Zooming a Remote Caller’s camera
Adding a Contact to the Phone Book
You can add a contact from the call log to the phone book.
...
1 Select a call from the call log and press .
...
2 Select Save.
Select OKto save the new contact and exit. 4.6 Zooming a Remote Caller ’s camera
You can zoom in or out the remote caller ’s camera if it has the zooming func-
tion.
...
1 Select the remote caller ’s camera using the button.
...
2 To zoom in the remote caller ’s camera, press .
...
3
To zoom out the remote caller ’s camera, press .
The camera on VA240 does not offer the zooming function.
◀ 39 ▶          
						

							4.7 Remote Presentation
4.7 Remote Presentation
You can send the picture from your computer to the remote caller and give a
remote presentation during a call:
...
1 Press to open the Setup screen, and go to Call Control. SetPre-
sentation Source to DVI if the monitor is connected to the PC via DVI.
Otherwise, select PC.
...
2 Press . The picture from your computer will replace the remote
party’s image on his screen.
...
3
To stop the remote presentation, press again. The remote presentation function is available only during an H.323 call.
Only one caller can give a remote presentation at a time.
It is not possible to do a remote presentation with resolution of 1600 ☓
1200.
◀ 40 ▶         
						

							
5 Video Conferencing with RADVISION SCOPIA Systems
You can use VC240 by itself for a high-definition video call between two
people (point-to-point video call). Enjoy additional features such as central-
ized management, multi-party conferencing, recording and streaming, and
firewall traversal by adding a video conferencing system with RADVISION
SCOPIA.
RADVISION SCOPIA is a family of products delivered as network appli-
ances and software, optimized to work with your VC240. Using RADVISION
SCOPIA, you can quickly deploy a scalable visual-communication network
and centrally manage the video network, enable multi-party meetings, and
extend a video conference to any laptop across any firewall.
Multi-party (Multipoint) Conferencing
Video communication with the VC240 can be more effective and efficient with
Multipoint (Multi-Party) Conferencing. This is where more than one partici-
pant connects simultaneously. With multipoint conferencing, VC240 allows
users to see and hear several other participants as they are all in the same
location-in a virtual conference room.
Multi-party callPoint-to-point call
Multipoint conferencing is accomplished by a Multipoint Conferencing Unit
(MCU), a device that manages a multipoint conference by connecting multi-
ple sites into the same video conference. RADVISION’s SCOPIA Elite MCU
offers 1080-p, high-definition processing and personal layouts for each partic-
ipant. You, along with other participants, control SCOPIA Elite conferences
with the VC240 remote control; you can mute participants, change the video
layouts, and invite other users to the conference.
High-end Desktop Video Conferencing
Managers and executives want ways to easily extend video conferences to
large numbers of remote and desktop users and make communication more
efficient, easier, and broader in reach. RADVISION’s SCOPIA Desktop al-
◀ 41 ▶ 
						

							
lows users to take conferencing wherever they go. SCOPIA Desktop is de-
signed to meet the demands of high-performance video conferencing with
a standard PC and Internet connection. The latest in video technology are
included, providing HD H.264 format for viewing both participants and
for data collaboration. The audio system provides echo cancellation, back-
ground noise suppression, and is highly resistant to network errors common
on the Internet.
SCOPIA Desktop is a simple web-browser plug-in that is centrally managed
and deployed on a PC without complex licensing fees or installation issues.
Click on a link and include teleworkers in meetings, participate in video con-
ferences from the road, collaborate with partners and suppliers, and seam-
lessly connect through firewalls.
Managing a Video Network
VC240 system administrators and users can be significantly more effective by
using a central-management system to perform tasks such as remote software
upgrades, system configurations, monitoring, and operation. As the num-
ber of VC240 systems grows in a deployment, a central management system
can make administrators significantly more efficient at managing distributed
VC240 systems from a single point.
RADVISION’s iVIEW Suite is the perfect solution for this requirement. A
comprehensive management solution is provided for collaborative video
communication. With iVIEW, effectively manage and monitor a video net- work to ensure the bandwidth is used efficiently. Also, easily schedule and
manage meetings, delivering high-quality video communication.
Recording and Streaming a Conference
Enable conference recording through RADVISION’s SCOPIA solution. The
recording feature captures audio, video, and data-preserving meetings in
high definition for playback. VCR-style controls provide access to any part
of the recordings. RADVISION’s SCOPIA additionally enables integrated
streaming for conference webcasting to both PC-and Mac-based participants.
This allows viewers to see the video streams of both the speaker and the pre-
sentation content. Simultaneous unicast and multicast support extend the
meeting to a virtually unlimited number of participants.
Firewall Traversal and NAT Solution
Firewalls are barrier devices placed between two separate networks that fil-
ter out unwanted packets, in many cases unintentionally blocking video-
conferencing traffic. Many firewalls also combine filtering functions with net-
work address translation (NAT) capability; the firewalls are usually located
at the border of the network they protect. SCOPIA PathFinder Firewall and
NAT Solution enable secure connections between enterprise networks and
remote sites. SCOPIA PathFinder maintains the security and advantages of
firewalls and NAT over video networks and allows seamless integration with
existing video endpoints and systems.
Learn More
To learn more on how RADVISION SCOPIA can help you set up your VC240,
visit
http://www.radvision.com/VC240 or contact your regional RADVI-
SION office.
◀ 42 ▶ 
						

							USA/AMERICAS
EMEAAPAC
T. +1 201 689 6300 T. +44 20 3178 8685T. +852 3472 4388
F. +1 201 689 6301 F. +44 20 3178 5717F. +852 2801 4071
[email protected] [email protected] [email protected]
◀ 43 ▶ 
						

							
6 Custom Settings
Some menu options are disabled depending on the video mode, as shown
below.
VC mode PC mode DVI mode
General Max. Power Saving ☓◯◯
Standby ◯☓☓
Picture Video Mode ◯☓☓
Color ◯☓☓
Tint (G/R) ◯☓☓
MagicBright ☓◯◯
Auto Adjustment ☓◯☓
Screen ☓◯☓
Picture Options R-Gain ☓◯◯
G-Gain ☓◯◯
B-Gain ☓◯◯
Size ☓◯◯
Digital NR ◯☓☓
6.1 Menu Language
Various menu languages are available. To change the menu language, press
to open the Setup screen, and go toGeneraland select a language from
Language . The menu will be displayed in the selected language.
◀ 44 ▶  
						

							6.2 Picture
6.2 Picture
PC or DVI Mode
Adjusting the Brightness
You can adjust the brightness, following the steps below.
...
1 Press to open the Setup screen, and go to Picture.
...
2 Select an option from MagicBright.
...
3
If the option you want is not available, select Custom, and then adjust Contrast
,Brightness andSharpness .
PresetMagicBright options are permanently defined. Custom set-
tings will be applied to Custom.
...
4 To reset allCustomsettings, select Picture Reset.
◀ 45 ▶      
						

							6.2 Picture
Then select
Reset Picture Mode . Adjusting the Color Tone
You can change the color tone:
...
1 Press to open the Setup screen, and go toPicture.
...
2 SelectPicture Options .
◀ 46 ▶