Samsung Syncmaster Vc240 User Manual

							
4 Video Call
4.1 Making a Call
You can make a call, following the steps below:
...
1 Press .
The screen will display the recent-call log on the left, the phone number
field in the middle, and your image on the right.
...
2 If you want to hide your image or make a call to someone without a
camera, set Call TypetoVoice .
...
3
Move the cursor to the input field, and enter the IP address of the remote
caller.
Refer to § 2.7 for details about how to type. ...
4 Alternatively, you can select a phone number from the recent-call log.
The selected phone number will be copied to the input field.
...
5
Press .
The messageConnected to will appear when the remote caller answers
the call.
...
6
To mute your voice during a call, press to disable the microphone.
will appear at the top right corner of the screen. To enable the mi-
crophone, press
again.
...
7 To disable the speaker during a call, press . will appear at the
top right corner of the screen. To enable the speaker, press
again.
◀ 27 ▶              
						

							4.2 Answering a Call
...
8
To end the call, press .
Select Yes. The call will be disconnected.
...
9
To view the recent-call log, select Call History. Refer to §
4.5 for details
about the recent-call log.
...
10
To open the phone book, select Phone Book. Refer to §
4.4 for details. 4.2 Answering a Call
An incoming call will be indicated by a
dialog box as shown. Select Acceptto ac-
cept the call, or select Rejectto refuse the
call.
Configure the call answering settings, following the steps below:
...
1 Press to open the Setup screen, and go toCall Control.
...
2 If you want to automatically connect to an incoming call, setAuto An-
swer toOn .
◀ 28 ▶        
						

							4.3 Screen Layout
When
On + Mic Mute is selected, an incoming call will automatically
be connected, but your voice will not be heard by the remote caller.
...
3
If you want to refuse all incoming calls, set Do not DisturbtoOn .
...
4 An incoming call will be indicated by a ringtone. If you want to mute
the ringtone, select Audio, and set SoundstoOff . 4.3 Screen Layout
The image of the remote party will appear when your call is accepted.
The
button can be used to change the screen layout of yours and the
remote caller ’s as required. Each time you press
, the screen layout will
change as shown below: The blue figure represents the remote caller, and the
green figure represents you.
• In DVI or PC mode
– A call is connected
– A call is not connected
• In VC mode
– A call is connected
– A call is not connected
You can change the size and location of the
smaller picture in this screen layout.
...
1 Press to open the Setup screen, and go toInput.
◀ 29 ▶                     
						

							4.3 Screen Layout
...
2 Select a size from
PIP Size. Two sizes are available.
...
3
Select a location from PIP Position. Five locations are available: bottom
right, top right, top center, top left, and bottom left.
...
4 The area on the screen concealed by the smaller picture will not be
shown. To expose a concealed area, adjust the opacity of the overlap- ping image; go to
PIP Transparency and selectHigh,Medium , orLow .
◀ 30 ▶    
						

							4.4 Making a Phone Book
4.4 Making a Phone Book
You can make calls easily by using the phone book. To open the phone book,
press
.
Adding a Group
It is best to create a group before adding a phone number so you can search
and manage numbers easily.
...
1 Go to Group and select Add Group . The number in parentheses next
to each group name indicates the number of contacts. ...
2 Enter the name of a group, and select
OKto save the name.
Renaming a Group
...
1 Select a group, and press .
...
2 SelectRename .
Enter a new group name, and selectOKto save the change.
◀ 31 ▶       
						

							4.4 Making a Phone Book
Deleting a Group
...
1 Select a group and press .
...
2 Select Delete . The selected group will be deleted, and its contacts will
be moved to the Unassignedgroup. Adding a Contact
...
1 Go toAlland select Add Contact .
...
2 Enter a contact name in theNamefield, and fill at least one of the IP,
URI , and Phone Number fields.
...
3
SpecifyGroup, and select OKto save the new contact information.
◀ 32 ▶       
						

							4.4 Making a Phone Book
Editing a Contact
...
1 Select a contact and press .
...
2 To view details of the contact before editing, select View. ...
3
Select
Editand change the information.
SelectOKto save the changes and exit.
Deleting a Contact
...
1 Select a contact and press .
◀ 33 ▶       
						

							4.4 Making a Phone Book
...
2 Select
Delete .
Select OK. The contact will be deleted.
...
3
To delete all contacts, select Delete All.
Select OK. All the contacts will be deleted.
...
4 To delete more than one contact at the same time, select the contacts and press . The selected contacts will be indicated by a .
...
5
After selecting all the contacts you want to delete, press with the
last selected contact highlighted, and select Delete.
SelectOK. The selected contacts will be deleted.
◀ 34 ▶        
						

							4.4 Making a Phone Book
Making a Call
Select a contact and press .
Alternatively, press and selectCall. Searching a Contact
You can search a contact using the contact name or IP address.
...
1 Press to open the phone book.
...
2 Move the cursor to the input field.
...
3
Enter capital or lowercase letters to search for contacts with names con-
taining the same letters.
...
4 Enter numbers to search for contacts with IP addresses containing the
same numbers.
◀ 35 ▶        
						

							4.5 Recent-Call Log
4.5 Recent-Call Log
To view the recent-call log, press and selectCall History .
Alternatively, press and selectCall History .
• To view the incoming-call log, select Received.
• To view the outgoing-call log, select Sent.
• To view the missed-call log, select Missed. Viewing Call Details from the Call Log
...
1 Select a call from the call log, and press .
...
2 SelectView. Details showing when the call was made and how long it
lasted will appear.
◀ 36 ▶