Samsung SyncMaster P50H, P50FP, P63FP Pdp Monitor User Manual

 
 
 
1) Scroll - This function is used to remove the afterimages that occur when a still screen is displayed on the selected display  
for  a  long time.  
2) Pixel Shift  - This allows the screen to be moved finely at the specified time interval.
3) Safety Screen  - The Safety Screen function is used to prevent afterimages from occurring when a still screen is displayed on the monitor for a long time.  The Interval item is used to set the repetition cycle in hour units and the Time item is 
used to set...

 
 
 
 
 
1) Video Wall  - A Video Wall is a set of video screens that are connected together, so that each screen shows a part of the whole picture or so that the same picture is repeated on each screen.
2) Video Wall (Screen divider)  - The screen can be divided into. You can select a number of screens with a different layout when dividing. 
zSelect a mode from Screen divider. zSelect a display from Display Selection. zThe place will be set up by pressing a number in the selected mode.  zThe MDC...

 
 
 
 
  
- Check the displays to see if any of the other displays connected have the same ID. If more than one displays have 
the same ID, those displays are not properly detected by the program due to data conflict.
- Check if the Display Set ID is a number between 0 and  25. (Adjust using the Display menu)  
Note : A Display Set ID must be a value between 0 and  25 . 
2. The display you wish to control does not appear on the other Control Info Grids  - Check to see if the display power is ON. (You...

Adjusting the PDP Display
Input
Available Modes
•  
PC / DVI / BNC
•  
AV
•  
HDMI
•  
Component
Source List  MENU → ENTER → [Input] → ENTER → [Source List] →   ,   → ENTER
Use to select 
PC, DVI  or other external input sources connected to the PDP Display. Use to
select the screen of your choice.
1. PC
2. DVI
3. AV
4. HDMI
5. Component
6. BNC  Note
•

The direct button on the remote control is the 'SOURCE' button.
Edit Name MENU → ENTER → [Input] →   → ENTER → [Edit Name] →   ,   → ENTER 

Name  the  input  device  connected  to  the  input  jacks  to  make  your  input  source  selection
easier.
VCR 
/ DVD  / Cable 
STB / HD STB  / Satellite STB / AV Receiver /  DVD Receiver / Game /
Camcorder / DVD Combo /  DHR / PC  Note
•

When connecting a PC to the HDMI or DVI terminal, set  Edit Name to PC.
• In other cases, set Edit Name to AV.
• However, since 640x480, 720P (1280x720), and 1080p (1920x1080) are common signals for AV and PC, make sure to set the Edit Name in accordance with the...

For watching motion pictures such as a DVD or VCR.
2. Internet
Medium brightness
For working with a mixture of images such as texts and graphics.
3. Text
Normal brightness
For documents or works involving heavy text.
4. Custom
Although 
the  values  are  carefully  chosen  by  our  engineers,  the  pre-configured  values
may not be comfortable to your eyes depending on your taste.
If this is the case, adjust the brightness and contrast by using the OSD menu.
Custom  By using the on-screen menus, the...

Color Tone 
MENU →   → ENTER → [Picture] →   →   →ENTER → [Color Tone] →   ,   → ENTER
The color tones can be changed.
1.
Off
2. Cool
3. Normal
4. Warm
5. Custom  Note
If 
you  set  the  Color  Tone  to Cool,  Normal,  Warm,  or  Custom,  the  Color  Temp  function  is
disabled.
If you set the  Color Tone to Off, the Color Control function is disabled
Color Control  Adjusts individual Red, Green, Blue color balance.
MENU → 
 → ENTER → [Picture] →   →   → → ENTER → [Color Control]
 Note
If you adjust the...

Blue
MENU →   → ENTER 
→ [Picture] →   →   →  → ENTER 
→ [Color Control ] →   →   →
ENTER → [Blue] →  ,   → ENTER
Color Temp. 
MENU 
→   → 
ENTER 
→ [Picture] →   →   →  → ENTER 
→ [Color Temp. ] →  ,   → ENTER
Color Temp. is a measure of the 'warmth' of the image colors.
 Note
This function is only enabled if the  Color Tone is set to Off.
Image Lock  Image Lock
 
 is used to fine-tune and get the best image by removing noise that creates un-
stable images with jitters and shakiness. If...

V-Position
MENU →   →
 ENTER  → [Picture]  →   →   →  →  →
 ENTER  → [Image Lock ] →   →   →
 → ENTER → [V-Position] →  ,   → ENTER
Adjusts the screen location vertically.
Auto Adjustment  MENU →   → ENTER → [Picture] →   →   →   →  →  → ENTER → [Auto Adjustment ]
The values of 
Fine, Coarse,  Position are adjusted automatically. By changing the resolution
in the control panel, the auto function is performed.
(Available in  PC mode only)  Note
The direct button on the remote control is the 'AUTO'...

2.
G-Gain
MENU  →   → ENTER 
→ [Picture] →   →   →   →  → →  → ENTER 
→ [Signal
Balance] →  → 
ENTER 
→ [Signal Control ] →   → ENTER 
→ [G-Gain] →  ,   → ENTER
3.
B-Gain
MENU  →   → 
ENTER 
→ [Picture] →   →   →   →  → →  → ENTER 
→ [Signal
Balance]  →  → 
ENTER 
→ [Signal Control ] →   →   →
 ENTER  → [B-Gain]  →  ,   →
ENTER 4.
R-Offset
MENU  →   → 
ENTER 
→ [Picture] →   →   →   →  → →  → ENTER 
→ [Signal
Balance]  →  → ENTER 
→ [Signal Control ] →  →   →   →
 ENTER  → [R-Offset]  →  ,
 → ENTER
5....