Samsung SyncMaster P50H, P50FP, P63FP Pdp Monitor User Manual

Connecting to a Camcorder
1. Locate 
the AV output jacks on the camcorder. They are usually found on the side or back
of the camcorder. Connect a set of audio cables between the AUDIO OUTPUT jacks on
the camcorder and the AV/COMPONENT AUDIO IN [L-AUDIO-R] on the PDP Display.
2. Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the AV IN [VIDEO] on the PDP Display.
3. Select  AV for the Camcorder connection using the Source button on the front of the PDP
Display or on the remote...

 Note
•
Select  Component for the connection to a DVD player using the SOURCE button on the
front of the PDP Display or on the remote control.
• Then, start the DVD Player with a DVD disc inserted.  Note
•

A component cable is optional.
For an explanation of Component video, consult your DVD manual.
Connecting a DTV Set Top Box  Note
•

The connections for a typical Set Top Box are shown below. 1. Connect 

a Component cable between the BNC / COMPONENT IN - P
R, Y, P
B port on
the PDP Display and the 
P...

Connecting Using a HDMI Cable
 Note
• Input  devices  such 
as  digital  DVD  are  connected  to  the  HDMI  IN  terminal  of  the  PDP
Display using the HDMI cable.
• You cannot connect a PC to the HDMI IN terminal.
Connecting Using a DVI Cable  Note
• Connect  the  DVI 

output  terminal  of  a  digital  output  device  to  the  DVI  IN  terminal  of  the
PDP Display using a DVI cable.
• Set the name of DVI input to AV device in Source -> Edit Name Menu. Connections 

Connecting to an Audio System
 Note
• Connect 
a set of audio cables between the AUX L, R jacks on the AUDIO SYSTEM and
AUDIO OUT [L-AUDIO-R] on PDP Display. Connections 

 
 
 
 
Introduction  
 
 
 A Multiple Display Control (MDC) is an application allowing various displays to be easily and simultaneously 
operated on a PC. RS-232C, a standard of serial communication, is used for the communication between a PC and 
a display. Therefore, a serial cable should be connected between the serial port on a PC and the serial port on a 
display.
Main Screen 
 
  Click Start > Program > Samsung > MDC System to start the program. 
  Select a set to see the volume of the selected...

 
  
Main IconsSelect Button
RemoconInfo Grid
Safety LockDisplay Selection
Port SelectionControl Tools 
1. Use the main icons to switch into each screen.
2. Allows you to enable or disable the remote control signal receiving function of the display unit. 
3. Set the Safety Lock function. 
When setting the Lock function, you can only operate power and lock buttons on the remote control and set.
4. The setting for the PC Serial Port can change. The original value is COM1. 
5. Click Select all or Clear to...

 
 
1. The Multiple Display Control is originally set to COM1.
2. If any port other than COM1 is used, COM1 through COM4 can be selected in the Port Selection Menu.
3. If the exact port name that is connected to the LCD Display using a serial cable is not selected, communication will be unavailable. 
4. The selected port is stored in the program and used for the next program as well.  
 Power Control 
 
1. Click Power Control of the main icons and the Power Control screen appears. 

 
Info Grid shows some basic information necessary to Power Control.
  1)  (Power Status)
 2) Input 
 3) Image Size
 4) On Timer
 5) Off Timer
2. Use the Select All button or Check Box to choose a display to control.
 Power Control allows controlling some of the functions of the selected display. 
1) Power On/Off  

 
 
 -
Turns the power of the selected display On/Off. 
2) Volume   - Controls the volume level of the selected display.  It receives the volume value of the selected display from the sets and displays it in the slider. 
(When you cancel the selection or choose Select All, the value returns to the default value 10) 
3)  (Mute On/Off)  
- Turns on/off the Mute function of the selected display. 
When selecting one set at a time, turn on the Mute function for the selected set. 
The Mute function is disabled...

 
 
 
Info Grid shows some basic information necessary to Input Source Control.
1) PC  - Changes the Input Source of the selected display to PC.
2) BNC  - Changes the Input Source of the selected display to BNC.
3) DVI  - Changes the Input Source of the selected display to DVI.
4) TV  -Chan
ges the Input Source of the selected display to TV. 
5) DTV  -Chan
ges the Input Source of the selected display to DTV. 
6) AV  -Chan
ges the Input Source of the selected display to AV. 
7) S-Video  - Changes the...