Samsung Syncmaster 923nw Quick Start Guide

 
 Setup  
MenuDescriptionPlay/Stop
Reset Reverts the product settings to factory defaults.  
 
 
[MENU 
→
 ,   →
   →
 →
 ,   →
 MENU]
zNo  zYes  
Customized Key You can specify a function which will be activated when 
the Customized Key( ) is pressed. 
 
[MENU 
→
 ,   →
   →
 ,   →
   →
 ,   →
 MENU]
Off Timer The monitors will turn off automatically at the specified 
time. 
 
 
[MENU 
→
 ,   →
   →
 ,   →
   →
 ,   →
   →
 ,   →
 MENU]
zOffzOn
Image Size You can change the size of the screen displayed...

MenuDescription
Information Shows a video source, display mode on the OSD screen.  
 
[MENU 
→
 ,   →
 MENU]
 

 Model   
 
 
 
 Check List 
Before calling for servic e, check the information in this section to see if you can remedy any 
problems yourself. If you do  need assistance, please call the phone number on the 
Information section or contact your dealer .
 
 
Symptom Check List Solutions
No images on the 
screen. I cannot turn 
on the monitor. Is the power cord connected 
properly?
Check the power cord connection 
and supply.
Can you see  Check Signal Cable  
on the screen?  (Connected using the D-sub...

 
 
Have the screen colors become 
strange after running a program or 
due to a crash between 
applications?Reboot the computer.
Has the video card been set 
properly?Set the video card by referring to the 
video card manual. 
The screen suddenly 
has become 
unbalanced.Have you changed the video card or 
the driver?Adjust screen image position and 
size using the OSD.
Have you adjusted the resolution or 
frequency to the monitor?Adjust the resolution and frequency 
at the video card.  
(Refer to the...

of the driver used. (Refer to the computer or the video card 
manual for details.) 
How can I adjust the resolution? Windows ME/XP/2000 : Set the resolution at the Control 
Panel
→Display
→Settings.  
 
* Contact the video card manufacturer for details.
How can I set the Power Saving 
function?Windows ME/XP/2000 : Set the function at BIOS-SETUP of the 
computer or the screen saver. (Refer to Windows/Computer 
Manual).  
How can I clean the outer 
case/LCD Panel?Disconnect the power cord and then clean...

1. If there are any sub woofer speakers near the monitor, unplug and relocate the woofer 
to another room.  
2. Remove all electronic devices such as radios, fans, clocks and telephones that are 
within 3 feet (one meter) of the monitor.  
 
 
 Useful Tips 
 
zA monitor recreates visual signals received from the computer. Therefore, if there is trouble with 
the computer or the video card, this can cause the monitor to become blank, have poor coloring, 
noise, Video mode not supported, etc. In this case,...

 Model   
 
 
 
 Check List 
Before calling for servic e, check the information in this section to see if you can remedy any 
problems yourself. If you do  need assistance, please call the phone number on the 
Information section or contact your dealer .
 
 
Symptom Check List Solutions
No images on the 
screen. I cannot turn 
on the monitor. Is the power cord connected 
properly?
Check the power cord connection 
and supply.
Can you see  Check Signal Cable  
on the screen?  (Connected using the D-sub...

 
 
Have the screen colors become 
strange after running a program or 
due to a crash between 
applications?Reboot the computer.
Has the video card been set 
properly?Set the video card by referring to the 
video card manual. 
The screen suddenly 
has become 
unbalanced.Have you changed the video card or 
the driver?Adjust screen image position and 
size using the OSD.
Have you adjusted the resolution or 
frequency to the monitor?Adjust the resolution and frequency 
at the video card.  
(Refer to the...

of the driver used. (Refer to the computer or the video card 
manual for details.) 
How can I adjust the resolution? Windows ME/XP/2000 : Set the resolution at the Control 
Panel
→Display
→Settings.  
 
* Contact the video card manufacturer for details.
How can I set the Power Saving 
function?Windows ME/XP/2000 : Set the function at BIOS-SETUP of the 
computer or the screen saver. (Refer to Windows/Computer 
Manual).  
How can I clean the outer 
case/LCD Panel?Disconnect the power cord and then clean...

1. If there are any sub woofer speakers near the monitor, unplug and relocate the woofer 
to another room.  
2. Remove all electronic devices such as radios, fans, clocks and telephones that are 
within 3 feet (one meter) of the monitor.  
 
 
 Useful Tips 
 
zA monitor recreates visual signals received from the computer. Therefore, if there is trouble with 
the computer or the video card, this can cause the monitor to become blank, have poor coloring, 
noise, Video mode not supported, etc. In this case,...